69 results for "Ametek - Jofra APM100BGSG" between $450.00 and $7,500.00

Accuracies to 0.01% of FS. Available in PSI, kPa or Bar Ranges. Several pressure references: Gauge, differential, absolute, and Vac. Rugged construction. Engineered for use in the laboratory or in the field. Calibrators recognize range and reference of the modules for ease use. Use multiple range modules with one calibrator.

Calibrate pressure at varying reference levels using external APM pressure modules with accuracies up to 0.01% F.S.

Patent pending DLC, Dynamic Load Compensation system, for perfect temperature uniformity in the insert. Unique intelligent sensors for plug’n’play connection. USB connector for communication. Easy-to-read color VGA display with perfect overview of the actual status. Intuitive, fast and user-friendly navigation. Lightweight and easy to carry around. New functional carrying case design. New multi-hole insert kits covering all the most used sensor sizes. High profile design and the well-known...

Input and Output RTD: 14 types, TC:13 types Resistance: 0 to 4,000 Ω (read) 5 to 4,000 Ω (source) mV: -10 to 75 mV. High level of protection Fuse-less protection for internal circuitry - a common cause of failure in other units without this protection. CJC Selectable feature - use with or without cold junction compensation depending on application. Setpoints User-defined - make testing easier by storing the necessary settings for repeated test points and sequences. High accuracy Accuracy up...

JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermoswithes,pressure gauges and pressure switches. JOFRACAL can be used with JOFRA DPC-500, HPC600, HPC500, HPC502 and IPI pressure calibrators, all JOFRA temperature calibrators, as well as JOFRA AMC910, ASC300 multi signal calibrator and ASM-800 signal multi scanner. When used with JOFRA ASM-800 signal multi scanner, JOFRACAL can perform a simultaneous semiautomatic calibration of up to 24 pressure and...

The MTC series features a large backlit display showing a lot of useful information at the same time: The set value and the true temperature, the status on the thermo switch test input, a count- down time before the temperature is stable and a big check mark when it is stable. To save time use the automatic switch test. The MTC series will find the open and close temperatures on a thermo switch and calculate the dead band.

Economical, easy-to-use, meet most testing applications. Pumps offer advanced features such as vernier valves. The pump and the indicator are separate systems. If calibration is required, the pump and indicator are independent and only the indicator needs to be returned. Pressure Range: 0 to 2 bar/ 90 PSI.

Interchangeable inserts. Multi-hole insertion tubes. Automatic switch test. RS 232 and calibration software. Multi information display. Safty banana bushings. Auto stepping. Stability indicator. Count down timer (shows when unit is stable). Programmable maximum temperature. Fast simulation/training mode. Re-calibration from keyboard.

The Ametek Jofra Model T-811 pneumatic vacuum pump is an economical and lightweight pump. The pump has a T-fitting allowing for connection to the 1/8 in NPT threads and the 1/8 BSP threads on the T-811M model. The body is flat on one side preventing it from rolling and offers features such as a fine control vernier and a thumbscrew for rapid or gradual pressure release.

The Ametek Jofra Model P014 hydraulic pump is designed for high pressure oil applications. The small size and light weight make it a sensible, rugged, and portable solution. The pump has a 4 pressure output manifold similar to the JOFRA screwpump. Fine adjustment vernier valve and fittings are optional. Standard thread connections are 1/4 in BSP and adapters are available.

Wide temperature range ATC-125 ultra cooler: -90°C to 125°C / -130°F to 257°F. Portable calibration at low temperature State of the art cooling technology ensures energy efficiency, environmental friendliness and portable calibration. High accuracy Using the internal reference or the external reference probe. 4-wire True-Ohm-Measurement technology is used. Improved temperature homogeneity Unique dual-zone block ensures good temperature homogeneity in the critical calibration zone. Cost effective...

Interchangeable inserts. Multi-hole insertion tubes. Automatic switch test. RS 232 and calibration software. Multi information display. Safty banana bushings. Auto stepping. Stability indicator. Count down timer (shows when unit is stable). Programmable maximum temperature. Fast simulation/training mode. Re-calibration from keyboard.

Interchangeable inserts. Multi-hole insertion tubes. Automatic switch test. RS 232 and calibration software. Multi information display. Safty banana bushings. Auto stepping. Stability indicator. Count down timer (shows when unit is stable). Programmable maximum temperature. Fast simulation/training mode. Re-calibration from keyboard.

Designed for people who perform tests and verifications of temperature sensing devices in the field. This instrument is ideal when time is a critical factor and the highest accuracy is not a critical factor. Reduced size and weight are important considerations because the unit is able to fi t into a tool box or instrument carrying case and can be used for sensors that are difficult to access. One-key-one-function user interface provides immediate access to setting the temperature and the auto...

The HPC400 can be delivered with a soft case as option (Just order Option C above). The handy soft case is designed for protection during transport. The soft case has separate compartments for HPC400 (w/Velcro strap), test leads, test hoses, temperature probe, and JOFRA APM pressure module. A shoulder strap ensures convenient transportation when climbing ladders, etc. and the handy strap at the back makes it possible to hang the instrument on a pipe, ladder etc. The manual and calibration documents...

JOFRA HPC500 family of calibrators feature deadweight tester accuracy in a modern digital package. The HPC is available as an independent calibrator or in one of 6 ready for-test systems that are complete and equipped to meet any need for pressure calibration. The HPC500 family may be used in a very broad range of applications from simple tool type jobs to complex calibration jobs in custody transfer systems. The JOFRA HPC500 calibrators introduce a new generation of AMETEK handheld pressure calibrators...

Dual Heat Zone Stability Technology. Multi-hole Interchangeable insertion tubes. Automatic switch test. RS 232 and calibration software. Multi information display. Safty banana bushings. Timed Stable Auto stepping. Stability indicator. Count down timer (shows when unit is stable). Programmable maximum temperature. Fast simulation/training mode. Re-calibration from keyboard.