169 results for "American Pattern Hand Files Smooth Cut, 8" between $10.00 and $75.00

One of the basic gun work files and an excellent, all purpose file for dressing, striking off, shaping and metal removing of all types. Parallel in width, taper slightly in thickness. Double-cut sides; one edge is single-cut, other is safe. Mfg: Brownells SPECS: 8" (20.3cm) American, 25/32" (19.8mm) wide x 7/32" (5.6mm) thick. 10" (25.4cm) American, 31/32" (24.6mm) wide x ¼" (6.3mm) thick.

The hand file is used primarily for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the flat file but without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom, one edge single cut and one edge is safe. 25/32" Wide X 7/32" Thick

The hand file is used primarily for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the flat file but without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom, one edge single cut and one edge is safe. 1-5/32" Wide X 9/32" Thick

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved-cut, rigid type with tang Pitch and rake designed to avoid pinning and to provide smoothest finish Teeth arranged in curved contours across the file face

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut Exactly like flat files in shape, dimension and weight, but fewer teeth per inch Pitch and rake designed to avoid pinning and to provide smoothest finish

Special tooth construction eliminates clogging when filing aluminum Flat shape Smooth finish obtained by using shearing cut toward left 2 sets of diagonal rows of teeth Second set of teeth cut in opposite diagonal direction and on top of the first set

Special tooth construction eliminates clogging when filing aluminum Flat shape Smooth finish obtained by using shearing cut toward left 2 sets of diagonal rows of teeth Second set of teeth cut in opposite diagonal direction and on top of the first set

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of commercial tool steel Half-round shape Flat on 1 side, convex on opposite Particularly adapted for bearings and concave surfaces Teeth arranged in curved contours across the file face

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut, rigid type with tang Pitch and rake designed to avoid pinning and to provide smoothest finish Teeth arranged in curved contours across the file face

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut Exactly like flat files in shape, dimension and weight, but fewer teeth per inch Pitch and rake designed to avoid pinning and to provide smoothest finish

Set of 5 files fit easily and securely into rugged, compact pouch 10-Inch /250mm half-round bastard file 10-Inch /250mm mill bastard file 8-Inch /200mm mill bastard file 8-Inch /200mm mill smooth file 6-Inch /150mm slim taper file Rubber coating and rounded shape eliminates pressure points Set of 5 files fits easily and securely into rugged, compact pouch Hang hole for easy storage

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut Pitch and rake designed to avoid pinning and to provide smoothest finish Teeth arranged in curved contours across the file face

A double purpose milled-curved tooth file, smooths as it roughs Rectangular shape Curved cut Teeth cut in an off center arc to permit fast cutting Smoothes as it roughs

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut Pitch and rake designed to avoid pinning and to provide smoothest finish Teeth arranged in curved contours across the file face

American pattern rasp, pattern maker's cabinet Used primarily by cabinetmakers Half-round shape Narrow pattern, cut edges Used when smooth wood finish is required

Nicholson Flat Hand File (Boxed), American Pattern, Double Cut, Rectangular, Coarse, 8" Length

Nicholson Flat Hand File (Boxed), American Pattern, Double Cut, Rectangular, Medium, 8" Length