216 results for "American Pattern Hand Files Bastard Cut, 10" between $5.00 and $75.00

Rounded on one side, flat on opposite side. Back of half round file is double-cut.

The hand file is used primarily for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the flat file but without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom, one edge single cut and one edge is safe. 25/32" Wide X 7/32" Thick

The hand file is used primarily for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the flat file but without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom, one edge single cut and one edge is safe. 31/32" Wide X 1/4" Thick

10 inch length Bastard cut Tapered flat shape, cut on all four sides; Good for shaping and refining rectangular break-throughs.

Nicholson, 10" Black Diamond MillBastard File, Used For Sharpening Mill Or Circular Saws, For Draw-Filling and Finishing Metals, Rectangular Shape, Single-Cut On Sides and Edges, 2 Square Edges, American Pattern, All Sizes Taper Slightly In Width.

Length - 12 in Tool Shape - Taper to Point in Width Cut Type - Bastard Cut Style - American Pattern Applicable Materials - Most Metals

10 inch length Bastard cut Rectangular shape with two safe edges

Used for sharpening crosscut saws with "M" teeth, circular saws and saw teeth with less than 60 degree angle Triangular shape, single-cut Edges set and cut Same number of teeth per inch as mill bastard files of equivalent length Regularly supplied with "cut back" unless "safe backs" specifically ordered

Rapid, free cutting files designed for lathe filing Safe edges to protect shoulder or dog Made on flat blanks in bastard-cut Cut faster than regular mill files and leave smoother finish Rectangular shape, single cut

Set of 5 files fit easily and securely into rugged, compact pouch 10-Inch /250mm half-round bastard file 10-Inch /250mm mill bastard file 8-Inch /200mm mill bastard file 8-Inch /200mm mill smooth file 6-Inch /150mm slim taper file Rubber coating and rounded shape eliminates pressure points Set of 5 files fits easily and securely into rugged, compact pouch Hang hole for easy storage

Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files are double-cut Boxed Second set of teeth cut in opposite diagonal direction and on top of the first set

Special tooth construction eliminates clogging when filing aluminum Flat shape Smooth finish obtained by using shearing cut toward left 2 sets of diagonal rows of teeth Second set of teeth cut in opposite diagonal direction and on top of the first set

This double cut file is used when filing slots, grooves, keyways, inside corners and square holes. Tapered toward the point, all four sides are equal filing surfaces. Double cut on all four sides. 12" Length X 1/2" Diameter

This double cut file is used when filing slots, grooves, keyways, inside corners and square holes. Tapered toward the point, all four sides are equal filing surfaces. Double cut on all four sides. 10" Length X 3/8" Diameter

Ideal for smooth, rapid work on cast iron, bronze, lead, babbitt, aluminum, zinc, plastics and any steel up to the hardness of annealed tool steel Rectangular shape Curved cut, rigid type with tang Pitch and rake designed to avoid pinning and to provide smoothest finish Teeth arranged in curved contours across the file face

Nicholson Flat Hand File (Boxed), American Pattern, Double Cut, Rectangular, Fine, 12" Length

Nicholson Flat Hand File (Boxed), American Pattern, Double Cut, Rectangular, Fine, 8" Length

Nicholson Flat Hand File (Boxed), American Pattern, Double Cut, Rectangular, Medium, 6" Length