|
Amana Tool 610400 10" 40T 15° ATB General Purpose Cut-Off Blade
Amana610400 General Purpose Cut-Off Blade 15º Hook - Alternate Top Bevel (ATB) Grind. While similar in most aspects to the multi-use/general purpose blades, this one has a slightly lower hook angle.That lower angle improves the surface quality of the cut but increases the feed pressure required.This blade is a good choice for general purpose ripping and crosscutting of hardwoods and softwoods in a range of thicknesses, with occasional cutting of plywood and other manmade materials mixed in. Specification... 
|
$82.65
circlesaw.com
|
Top stores
circlesaw.com
$82.65
|
|
Mamba Thin Kerf General Purpose Contractor Series 10-Inch Saw Blade
Faster & cleaner cuts! Specifically designed for contractors. Excellent at ripping and crosscutting wood & veneered plywood. * General Purpose/Rip & Crosscut * Thin Kerf * Contractor Series by Amana Tool® For use in portable saws and table saws.
|
$39.00
|
Top stores
Toolstoday.com
$39.00
|
|
Amana 10" 40T A.G.E. General Purpose Saw Blade MD10-400C
Diameter: 10". Teeth: 40. Kerf: 3.2mm/.126". Plate: 2.2mm/.087". Bore: 5/8". Hook: 15°. Grind: ATB.
|
$47.29
|
Top stores
keimlumber.com
$47.29
|
|
Amana Tool 610601 Saw Blade, 10" X 60T TC, General Purpose Cut-Off, Carbide-Tipped
This Carbide-Tipped Saw Blade from Amana Tool is a good all purpose saw blade for woods, composites, and laminates-not rec'd for ripping anything over 1 inch thick. Slightly more durable than an ATB blade but unlikely to give as clean a cross cut on natural wood products. Manufacturer: Amana Tool Brand: Amana Tool MPN: 610601 UPC: 738685610619 Collection: Amana Color/Finish: Steel Type: Saw Blade Diameter: 10in. (250mm) Bore: 5/8in. Teeth: 60 Grind: TCG (Triple Chip Grind) ...
|
$50.00
|
Top stores
Woodworkers Hdwe & Supply
$50.00
|
|
Amana Tool 610400 Saw Blade, 10" X 40T ATB, General Purpose Cut-Off, Carbide-Tipped
This Carbide-Tipped Saw Blade from Amana Tool is intended for universal use. Both ripping and crosscutting of solid woods and plywoods. Because of coarser tooth pitch, these blades are not capable of fine cross cutting. Manufacturer: Amana Tool Brand: Amana Tool MPN: 610400 UPC: 738685610104 Collection: Amana Color/Finish: Steel Type: Saw Blade Diameter: 10in. (250mm) Bore: 5/8in. Teeth: 40 Grind: ATB(Alternate Top Bevel Grind) Kerf (B): 0.126 (3.2mm) Plate(C): 0.087 (2...
|
$44.95
|
Top stores
Woodworkers Hdwe & Supply
$44.95
|
|
Amana 10" 40t General Purpose Blade, A.G.E. Series
Amana's German-made saw blades are significantly less expensive than other professional quality blades. Unlike most so-called 'bargain blades', these are all a full 1/8" thick, have precision ground, resharpenable carbide teeth, good tooth geometry and careful machining. What they lack are heavy advertising, fancy packaging and special coatings. If you don't want to spend a gang of money for specialty tooling like laminate and non-ferrous metal blades, or if you just want a couple of first-rate...
|
$46.99
Highland Woodworking
|
Top stores
Highland Woodworking
$46.99
|
|
|
EVR-GP1040A General Purpose ATB Cut-Off
|
$78.45
carbide.com
|
Top stores
carbide.com
$78.45
|
|
ArmorMax-Coated Non-Stick Cut-Off & Crosscut 10 Inch Saw Blades
ArmorMAX™ non-stick coating reduces friction, provides smooth cuts, prevent rust and improves overall blade life. * Cut-Off & Crosscut * Carbide Tipped, Industrial Quality * PTFE Non-Stick Coating Applications: Rip & Crosscut Wood & Veneered Plywood For use in table saws.
|
$70.39
|
Top stores
Toolstoday.com
$70.39
|
|
Amana 10" 60T A.G.E. Cut-Off & Crosscut Saw Blade MD10-600
Diameter: 10". Teeth: 60. Kerf: 3.2mm/.126". Plate: 2.2mm/.087". Bore: 5/8". Hook: 12°. Grind: ATB.
|
$52.29
|
Top stores
keimlumber.com
$52.29
|
|
Amana AGE Series GENERAL 10 Inch x 40 Tooth ATB 5/8 Inch BORE Saw Blade
This is a general purpose blade which provides good results ripping and crosscutting in a variety of materials.
|
$46.28
acetoolonline.com
|
Top stores
acetoolonline.com
$46.28
|
|
|
EVR-GP1040T General Purpose TC Cut-Off
|
$81.25
carbide.com
|
Top stores
carbide.com
$81.25
|
