151 results for "Amana radius ball" between $25.00 and $150.00

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. A beading bit can be transformed into a corner rounding bit by changing the bearing (and vice versa.)

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. A beading bit can be transformed into a corner rounding bit by changing the bearing (and vice versa.)

Amana Tool 57242 Carbide Tipped Multi Radius with Ultra-Glide Ball Bearing Guide Solid Surface 2-1/4 Dia x 1-3/8 Cut Height x 1/2 Inch Shank Router Bit

Router Bits from Amana: 2-Flute Bull Nose Radius with Ball Bearing Guide. These bits are very useful for template or pattern routing. Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication.

Router Bits from Amana: 2-Flute Multi-Radius with Ultra-Glide Ball Bearing Guide

Radius: 3/8". Large diameter: 1-1/4". Carbide height: 5/8". Shank diameter: 1/2". Overall length: 2-9/16".

The basic edge forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.

Amana Tool 54213 - 1/8" Radius, Multiform Bead Profile Router Bit Amana Tool 54213, 1/8" radius, multiform bead profile router bit has a 1/2" shank 2 flute with ball bearing guide 7/8" diameter OAL: 3"

Large Diameter: 1". Each Radius: 5/32". Carbide Height: 5/8". Shank Diameter: 1/4". Overall Length: 2-1/8".

Amana Tool 47769 Ultra-Glide High Performance Ball Bearing 3/4 Overall Dia x 1/4 Inner Dia x 1 Inch Radius x 1 Taper

Application: Use with corner rounding bits, to cut a full 180° bull-nose on 1/2", 1", 1-1/2" or 2" thick stock without turning the material over. (Two 30"x98"x1/2" laminated sheets = 200 lbs. +). Also useful for 'on-site' cutting where a conventional round-over cannot be used. Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide. Replacement 'Ultra-Guide™' bearing #47737 (after 6/95). Replacement steel bearing #47738 (prior to 6/95). Replacement collar #47740. Warning: Maximum...

Bead & 'V' Paneling Assemblies 2 Wing With Ball Bearing Guide Designed for Tongue&Groove solid wood paneling. Choose from either a 1/4" radius 'bead' pattern set (55330) or a 45∞ 'V' pattern set including one complete 'V' Panel Assembly and one 'Bead' profile cutter. For 1/2" through 1" material

Amana Tool 49524 - 1-1/4" Radius Corner Round Router Bit Amana Tool 49524, 1-1/4" radius corner round router bit has a 1/2" shank Ball bearing guide included Depth: 1-1/2" OAL: 3-1/4" WARNING: 10,000 MAXIMUM RPM Note: Not guaranteed due to extreme diameter and radius For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools Tool life will be prolonged and a smoother finish will result Replacement bearing #47706 Corner round is the...

Amana Architectural Molding Router Bits 2 flute with ball bearing guide. 1-7/8" diameter, 15/64" radius, 15/16" carbide height, 1/2" shank. Super clean cuts and as well as Cost effective.

Amana Tool 45950 - 1/4" Radius Core Box Router Bit w/ Guide Bearing Amana Tool 45918, 1/4" radius core box router bit with guide bearing has a 1/4" shank OAL: 2" Designed for fluting cuts guided by a template or pattern The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece With a handheld router, the template must be on top of the workpiece With a table-mounted router, the template must be on bottom of the workpiece

Amana Raised Panel bit with ball bearing guide. 3-3/8" Diameter, 1-9/16" radius, 1/2" carbide height, 1/2" shank. Super clean cuts and as well as Cost effective.

Amana Tool 49504. Radius Corner Rounding 2 Flute Router Bit With Ball Bearing Guide.