497 results for "Amana g sawblade" between $25.00 and $200.00

Diameter: 10". Teeth: 60. Kerf: 3.2mm/.126". Plate: 2.2mm/.087". Bore: 5/8". Hook: 12°. Grind: ATB.

With these special glue line blades, you can shear the wood without needing to joint the stock prior to gluing. The precision triple-chip grind and extra-high hook angle allow aggressive feed rates, yet produce an extra-smooth finish. The thick steel plates and laser-cut expansion slots minimize vibration and reduce noise. Use these carbide-tipped blades on table saw, sliding table saws, and single and gang-rip operations.

Carbide Tipped. Combination 4+1 (4 Alternate Top Bevel Followed by 1 Raker - Then an "Open" Gullet for Chip Clearance). All-purpose table saw blades. In many custom woodworking shops one blade must cut a wide variety of materials. This blade will effectively rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard. It features the time-tested combination blade design- four alternate top bevel teeth with a flat-top raker. The laser cut slots virtually eliminate...

The special carbide formulation and blade geometery make this blade ideal for cutting aluminum and non-ferrous metal bars such as copper, brass, bronze, and lead. They are also good for cutting relatively thick-walled extrusions and profiles. The negative hook angle, triple-chip grind, and thick plate combine to produce a superior finish. These blades can be used to cut other difficult materials such as plastic, PVC tubing, and fiberglass.

Diameter: 10". Teeth: 40. Kerf: 3.2mm/.126". Plate: 2.2mm/.087". Bore: 5/8". Hook: 15°. Grind: ATB.

Saw Blade Application: For cutting double-sided plastic laminate, plexiglas and solid-surface materials such as Dupont®, Corian®, Wilsonart®, Gilbralter® & SSV®, Fountainhead, etc. Suitable for table saws & radial arm and similar type machines due to 0° hook angle.

Saw Blade Application: Table, radial or sliding table saws such as Striebig, Altendorf, SCMI, Delta, etc. Choose ATB grind for solid wood or veneer plywood and TC grind for MDF, OSB, HDF and single or double sided melamine and plastic laminated panels.

Saw Blade Application: Intended for radial arm and other types of saws where the blade is above the workpiece. Negative two degrees (-2°) hook angle reduces the tendency of the blade grabbing the material.

Circular Saw Blade Application: General trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material.

Saw Blade Application: Intended for radial arm and other types of saws where the blade is above the workpiece. Negative two degrees (-2°) hook angle reduces the tendency of the blade grabbing the material.

Save money with the A.G.E. 10" 3 Piece MASTER Saw Blades Set!! Set includes one each of the following saw blades: MD10-240 (10" x 24 Tooth Ripping ATB 5/8" Bore Saw Blade) MD10-400 (10" x 40 Tooth General Purpose ATB 5/8" Bore Saw Blade) MD10-601 (10" x 60 Tooth Plywood/Laminate TCG 5/8" Bore Saw Blade) Saw Blades are INDUSTRIAL QUALITY CARBIDE TIPPED. GREAT BARGAIN!! Made in Germany.

AMANA 610600 10" 60 TEETH TCG 10 DEGREE HOOK SAWBLADE Application: General trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material.

Dia.: 8 to 8-1/4". Teeth: 24. Kerf: 2.2mm/.087". Plate: 1.4mm/.055. Bore: 5/8". Max RPM: 7,500. Blade No.: MA8024. Rip & Crosscut Wood. Veneered Plywood. (1) Amana 8 to 8-1/4 in. 24 Tooth Circular Saw Blade.

Diameter: 12". Teeth: 72. Kerf: 2.8mm/.110". Plate: 2.2mm/.087". Bore: 1". Hook: 8°. Grind: ATB + F. Max RPM: 6,200. Cuts: Wood, Veneered Plywood, 2 Sided Melamine.

Diameter: 12". Teeth: 45. Kerf: 2.8mm/.110". Plate: 2.2mm/.087". Bore: 1". Hook: 15°. Grind: ATB + F. Max RPM: 6,200. Cuts: Wood, Veneered Plywood, Chipboard/MDF.

Click on image to enlarge. This Carbide-Tipped Saw Blade from Amana Tool is designed for ripping and cross-cutting natural woods. Teeth consist of four ATB followed by one square raker. Large gullets in the saw body allow for deeper cuts & improved chip ejection despite short pitch. Excellent all-purpose blade capable of both ripping and crosscutting. Deeper gullets on every 5th tooth allow for faster ripping without loss of cross cutting quality. Manufacturer: Amana Tool Brand: Amana Tool MPN: ...