53 results for "Amana bor spacer set" between $1.00 and $300.00

Amana Tool 66210 Spacer Ring Set

Five piece tungsten carbide tipped cutterhead set, complete with spacer rings. Suitable for producing multiple profiles, profile/counter profiles, in single or multiple passes in softwood, hardwood and man-made boards on a spindle molder.

Amana Tool 67220 Spacer (Sleeve Bushings) 1 Dia x 1/4 Height for 1/2 Spindle Shaper Cutters

Amana 55320 Specifications: Type: 90degrees "V" Large Diameter: 1-13/16" Carbide Height: 1-3/16" Shank Diameter: 1/2" Overall Length: 3-1/8"Amana 55320 Features: These assemblies are designed to cut tongue Two patterns a 1/4" bead (#55330) or a 45degrees V (#55320) are available individually or as a set. Each assembly comprises a profile cutter a rabbet cutter and groove cutter two different-size bearings a 1/2" shank arbor and a selection of washers shims and spacers. Assemble the profile cutter...

Order #:Description. 55422:Concave profile cutter. 55424:Concave cope cutter. 55354:.250" groove cutter. 55448:.300" trim cutter (.865" dia.). 55450:.433" trim cutter (.865" dia.). 55452:.400" rabbet cutter (1.615" dia.). 47708:.865" ball bearings (2 required). 47622:1/2" shank arbors with nuts (2 required). 55356:.002" shims (4 required). 55402:.040" shims (4 required). 55357:.004" shims (4 required). 55367:3.6mm spacers (4 required).

Quadrasetô 2-Wing Adjustable Slotting Assembly Router Bits With Ball Bearing Guide The 'Quadraset' with its four cutters enables you to cut grooves and dados from 1/8" through *23/32" (3.2MM-18.0MM) in increments of 1/32" (0.1MM). Tongue & Groove can also be achieved with proper set-up. Fully diagrammed instructions included for both fractional and metric sizes. Complete with four cutters (1/8", 5/32", 3/16", 1/4"), arbor, ball bearing guide, spacers, and shims. For different depth of cut, see...

Used between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #49592 through 49622.

Order #:Description. 55352:Ogee profile cutter. 55434:Ogee cope cutter. 55354:.250" groove cutter. 55448:.300" trim cutter (.865" dia.). 55450:.433" trim cutter (.865" dia.). 55452:.400" rabbet cutter (1.615" dia.). 47708:.865" ball bearings (2 required). 47622:1/2" shank arbors with nuts (2 required). 55356:.002" shims (4 required). 55402:.040" shims (4 required). 55357:.004" shims (4 required). 55367:3.6mm spacers (4 required).

Finger Joint Assembly Router Bits 2-Wing With Ball Bearing Guide With this assembly, you can cut one-finger through five-fingers in multiple passes. Both cuts are performed the same way; you simply turn over the counter-cut for a perfect fit (see diagrams). All cutters feature 'chipbreakers' behind each cutting tooth which limits the thickness of the chip, allowing for a safer cut. Assembly includes 5 individual finger cutters, 1/2" shank arbor, 1 straight cutter, ball bearing guide, shims, spacers...

These types of sets utilizes two different cutters that are 'coped' to each other. Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set.

2-WING These assemblies are designed to cut tongue & groove joinery for solid wood paneling. Each assembly comprises a profile cutter, a rabbet cutter and a groove cutter, two different-size bearings, a 1/2" shank arbor, a selection of washers, shims and spacers. Assemble the profile cutter, small bearing, and rabbet cutter as shown in the solid drawing to cut the tongue. To rout the groove, mount the groover and large bearing with the profiler, as shown in the ghosted drawing. This tool will...

These types of sets utilizes two different cutters that are 'coped' to each other. Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set. With trim cutters #55448 & #55450 - use on 7/8" through 1" stock use. For 5/8" through 7/8" stock, substitute trim cutters with spacers.