|
Ogee Stile & Rail Cutters without Ball Bearing
Amana Tool 56206 Carbide Tipped Ogee Rail 1-1/8 Dia x 21/32 Cut Height x 5/32 Radius x 1/4 Inch Shank Router Bit 
|
$35.78
|
Top stores
Toolstoday.com
$35.78
|
|
Bosch 85627M 1-5/8-Inch Diameter 51/64-Inch Cut Carbide Tipped Ogee Stile & Rail Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$59.13
|
Top stores
Amazon.com
$59.13
|
|
Amana Tool 56206 Carbide Tipped Ogee Rail 1-1/8 Dia x 21/32 Cut Height x 5/32 Radius x 1/4 Inch Shank Router Bit
Ogee Stile & Rail Cutters without Ball Bearing
|
$35.78
|
Top stores
Toolstoday.com
$35.78
|
|
Bosch 85625MC 1-5/8-Inch Diameter Carbide Tipped Ogee Stile & Rail 2 Piece Router Bit Set 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$88.19
|
Top stores
Amazon.com
$88.19
|
|
Bosch 85625M 1-5/8-Inch Diameter Carbide Tipped Ogee Stile & Rail 2 Piece Router Bit Set 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$100.00
|
Top stores
Amazon.com
$100.00
|
|
Floor King Carbide Tipped Saw Blade 6-1/2 Dia x 40T x 7/8 Concave Bore for Jamb & Undercut
Description This 40-tooth concave bore carbide tipped saw blade provides long lasting, accurate & level cutting. Easily cuts through tough wood, excellent for cutting along walls, baseboards, cabinet toe kicks, door jams, inside corners and most hanging doors.
|
$31.85
floormechanics.com
|
Top stores
floormechanics.com
$31.85
|
|
Amana Tool 55421 1-5/8 Diameter by 11/16-Inch Cuttting Height by 1/2-Inch Shank Concave Stile Rail Router Bit Set, 2-Piece
For 3/4-Inch material Carbide Tipped, Industrial Quality 1-5/8 Diameter, 11/16 Cutting Height, 1/2-Inch Shank 2 Wing. Concave profile. For use only in a table mounted router., Manufacturer: Amana Tool
|
$128.48
|
Top stores
Amazon.com
$128.48
|
|
Amana carbide-tipped 2 wing stile & rail set, 2 complete assemblies, roman ogee profile, 1/2" shank
carbide-tipped 2 wing stile & rail set, 2 complete assemblies, roman ogee profile, 1/2" shank
|
$135.68
carbide.com
|
Top stores
carbide.com
$135.68
|
|
Amana Tool Corp. 54116 - RAISED PANEL 1-5/8 DIA 1/2 SHK
Amana Tool Corp. 54116 - RAISED PANEL 1-5/8 DIA 1/2 SHK
|
$50.33
burnstools.com
|
Top stores
burnstools.com
$50.33
|
|
Amana Tool 55350 Carbide Tipped Reversible Ogee Stile and Rail Assembly 1-5/8 Dia x 11/16 Cut Height x 1/2 Inch Shank Router Bit
Individual Components for 2-Piece Stile & Rail Sets
|
$26.25
|
Top stores
Toolstoday.com
$26.25
|
|
Amana Tool MS12100-5/8 Carbide Tipped Miter 12 Inch Dia x 100T 4+1 ATB, -2 Deg, 5/8 Bore, Circular Saw Blade
Miter Saw Blades - 2° Negative Hook - 4 ATB & 1 Raker
|
$200.18
|
Top stores
Toolstoday.com
$200.18
|
|
Amana Tool MS14100-5/8 Carbide Tipped Miter 14 Inch Dia x 100T 4+1 ATB, -2 Deg, 5/8 Bore, Circular Saw Blade
Miter Saw Blades - 2° Negative Hook - 4 ATB & 1 Raker
|
$211.69
|
Top stores
Toolstoday.com
$211.69
|
|
Stile & Rail Cabinet Door Cutter Sets for 1-3/8 to 1-3/4 Inch Material - Ogee
Amana Tool SC581 2-Piece Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 3-9/16 Dia x 1-3/4 Cut Height x 3/16 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 to 1-3/4 Material
|
$359.14
|
Top stores
Toolstoday.com
$359.14
|
|
Amana Tool 55202 1/8" Carbide-Tipped Countersink for #4 Wood Screws
Wood Screw Size:#6. D - Plug Diameter:3/8". D1 - Drill Diameter:1/8". B - Plug Height:1/2". Tool No.:55202. d - Shank Diameter:5/16". L1 - Length:1-5/8". L - Overall Length:2-9/16". Replacement Drill Bit:630-102. Replacement set screw #:67083.
|
$29.70
circlesaw.com
|
Top stores
circlesaw.com
$29.70
|
|
Reversible Ogee Stile & Rail / Ogee Raised Panel Router Bits Set-1/2 Inch Shank by Amana Tool
Amana Tool AMS-203 Carbide Tipped 2-Piece Reversible Ogee Stile and Rail Cove Raised Panel 1/2 Inch Shank Router Bit Set
|
$246.45
|
Top stores
Toolstoday.com
$246.45
|
|
Bosch 85626M 1-5/8 Inch Carbide Tipped Ogee Stile & Rail Bit
Bosch 85627M is a 1-5/8 Inch Carbide Tipped Ogee Stile & Rail Bit. Micrograin bits with shear angle geometry, super-sharp cutting edges and close-tolerance manufacturing to ensure consistently smooth, tight-fitting joints.
|
$51.99
toolmarts.com
|
Top stores
toolmarts.com
$51.99
|
|
Amana 51510 1/8 in Diameter Solid Carbide Spiral Plastic 'O' Flute Bit
Down-Cut Tool Number: 51510. Up-Cut Tool Number: 51410. Lenght: 2". Shank: 1/8". Flute: Single. Diameter: 1/8". Cuts Plastic. Cuts Wood. Cuts Solid Surface Materials. Cuts Foam Board. (1) Amana 1/8 in Diameter Solid Carbide Spiral Plastic 'O' Flute Bit.
|
$27.71
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$27.71
|
|
Floor King Carbide Tipped Saw Blade 5-1/2 Dia x 36T x 22.22mm Concave Bore for Undercut Saw
Description Due to the bell-shaped rigid design, this concave bore, carbide-tipped blade is for use only with Crain® multi-undercut saw #555. Use to fully undercut inside corners, as well as undercut along walls, door jambs and under spaces.
|
$31.30
floormechanics.com
|
Top stores
floormechanics.com
$31.30
|
|
Amana 51410 1/8 in Diameter Solid Carbide Spiral Plastic 'O' Flute Bit
Up-Cut Tool Number: 51410. Down-Cut Tool Number: 51510. Lenght: 2". Shank: 1/8". Flute: Single. Diameter: 1/8". Cuts Plastic. Cuts Wood. Cuts Solid Surface Materials. Cuts Foam Board. (1) Amana 1/8 in Diameter Solid Carbide Spiral Plastic 'O' Flute Bit.
|
$27.71
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$27.71
|
|
Amana Tool 658010 Carbide Tipped L/H Outside Dado Blade 8 Inch Dia x 24T 5/8 Bore
Outside Blades for Dado Sets
|
$75.86
|
Top stores
Toolstoday.com
$75.86
|
|
Stile & Rail Cabinet Door Cutter Sets for 1 Inch Material - Ogee
Amana Tool SC564 2-Piece Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 3-9/16 Dia x 1-3/16 Cut Height x 5/32 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1 Inch Material
|
$281.23
|
Top stores
Toolstoday.com
$281.23
|
|
Stile & Rail Exterior Door Cutter Sets for 1-3/4 Inch Material - Ogee
Amana Tool SC594 2-Piece Carbide Tipped 3-Wing Stile & Rail Ogee Exterior Door 3-9/16 Dia x 2-1/16 Cut Height x 1/4 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/4 Material
|
$386.65
|
Top stores
Toolstoday.com
$386.65
|
|
Amana Tool 45758 Carbide Tipped V Groove 130 Deg x 1-1/4 Dia x 31/64 Cut Height x 1/4 Inch Shank Router Bit
'V' Groove Router Bits, Carbide Tipped
|
$39.71
|
Top stores
Toolstoday.com
$39.71
|
|
Amana Tool 45806 Carbide Tipped Dovetail 14 Deg x .532 Dia x 1/2 Cut Height x 1/2 Inch Shank Router Bit for Omnijig & Incra
14 Degree Dovetails Router Bits
|
$19.61
|
Top stores
Toolstoday.com
$19.61
|
|
Amana Tool AMS-501 3-Piece Carbide Tipped Bead Stile & Rail/Vertical Ogee w/ Bead Raised Panel 1-5/8 Dia x 1/2 Inch Shank Doormaking Router Bit Set
3-Piece Bead Stile & Rail/Vertical Ogee w/ Bead Raised Panel Router Bits Set by Amana Tool
|
$222.04
|
Top stores
Toolstoday.com
$222.04
|
|
Amana Tool SC654 Carbide Tipped Ogee Stile & Rail Cabinet Door 5/32 Radius x 3-9/16 Dia x 1-3/16 Cut Height x 1 & 1-1/4 Bore Shaper Cutter Set for 1 Inch Material
Raised Panel Shaper Cutters for 5/8 Inch Material - Ogee
|
$107.70
|
Top stores
Toolstoday.com
$107.70
|
|
Amana Tool 46184 3-Pc. Set Including Two 46180 1/8 Dia x 13/16 Cut Height x 1/8 Inch Shank Solid Carbide Compression Router Bits and One #47632 1/8 Inner Dia x 1/4 Inch Shank Router Adapter
Solid Carbide Mini 1/8 Compression Spiral Bit and Adapter
|
$140.15
|
Top stores
Toolstoday.com
$140.15
|
|
Amana Tool 514108 Carbide Tipped Aluminum and Non-Ferrous Metals 14 Inch Dia x 108T TCG, -6 Deg, 1 Inch Bore, Circular Saw Blade
Aluminum and Non-Ferrous Metal Cutting Saw Blades-For Thin Material
|
$205.09
|
Top stores
Toolstoday.com
$205.09
|
|
Amana Tool SC548 2-Piece Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 3-9/16 Dia x 1 Cut Height x 9/64 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 3/4 Material
Stile & Rail Cabinet Door Cutter Sets for 3/4 Inch Material - Ogee
|
$225.02
|
Top stores
Toolstoday.com
$225.02
|
|
Reversible Ogee Stile & Rail / Horizontal Cove Raised Panel Router Bits Set-1/2 Inch Shank by Amana
Amana Tool AMS-202 Carbide Tipped 2-Piece Reversible Ogee Stile and Rail Horizontal Cove Raised Panel 1/2 Inch Shank Router Bit Set
|
$246.45
|
Top stores
Toolstoday.com
$246.45
|
|
Reversible Ogee Stile & Rail / Horizontal Traditional Raised Panel Router Bits Set-1/2 Inch Shank by
Amana Tool AMS-201 Carbide Tipped 2-Piece Reversible Ogee Stile and Rail Horizontal Traditional Raised Panel 1/2 Inch Shank Router Bit Set
|
$246.45
|
Top stores
Toolstoday.com
$246.45
|
|
Stile & Rail Cabinet Door Cutter Sets for 1-3/8 Inch Material - Bead
Amana Tool SC582 2-Piece Carbide Tipped 3-Wing Stile & Rail Bead Cabinet Door 2-27/32 Dia x 1-9/16 Cut Height x 5/16 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 Material
|
$323.37
|
Top stores
Toolstoday.com
$323.37
|
|
Stile & Rail Cabinet Door Cutter Sets for 1-3/8 Inch Material - Bead & Cove
Amana Tool SC584 2-Piece Carbide Tipped 3-Wing Stile & Rail Bead & Cove Cabinet Door 3-9/16 Dia x 1-5/8 Cut Height x 13/64 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 Material
|
$337.47
|
Top stores
Toolstoday.com
$337.47
|
|
Stile & Rail Shaper Cutter Sets for 2-1/8 Inch Material - Exterior Door
Amana Tool SC596 2-Piece Carbide Tipped 3-Wing Stile & Rail Exterior Door 3-17/32 Dia x 2-1/8 Cut Height x 25/64 Radius x 1 & 1-1/4 Bore Shaper Cutter Set for 2-1/8 Material
|
$421.44
|
Top stores
Toolstoday.com
$421.44
|
|
Amana Tool 618132 Carbide Tipped Trim 18 Inch Dia x 132T ATB, 10 Deg, 1 Inch Bore, Circular Saw Blade
Trim Saw Blades
|
$285.79
|
Top stores
Toolstoday.com
$285.79
|
