8 results for "Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 Cut Height x 1/2 Inch Shank Router Bit" between $75.00 and $250.00

Amana 55350 Ogee Reversible Stile & Rail Assembly with Ball Bearing Guide, 2-Wing, 3/4" Material Cut both the rails and stiles with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Specification D - Cutting...

Amana 55370 Specifications: Pattern Type: Traditional "A" Reveal: 3/8" Diameter: 1-5/8" Carbide Height: 11/16" Shank: 1/2" Length: 3"Amana 55370 Features: Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening. For best results the rail cut should be done on a router table. With complete instructions. Note: Stile Tongue & Groove can be used on 1/2" through 3/4" material.

Amana Tool AMS-202 Carbide Tipped 2-Piece Reversible Ogee Stile and Rail Horizontal Cove Raised Panel 1/2 Inch Shank Router Bit Set

Ogee Stile & Rail Cutters