456 results for "Amana Tool 47204 45° Bevel 2 Flute Router Bit With Ball Bearing Guide 1/4" Shank" between $10.00 and $150.00

Amana 47204 Specifications: Diameter: 1-1/16" Degree: 45degrees Carbide Diameter: 9/32" Shank: 1/4" Length: 2"Amana 47204 Features: This is a steel-bodied carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.

1/2-Inch Cutting Diameter 1/4-Inch Cutting Height 1-5/8-Inch Length 1/4-Inch Shank, 2 Flute Carbide Tipped, Industrial Quality, Weight: 0.11 pounds, Manufacturer: Amana Tool

Description Amana 49410 22-1/2º Chamfer Router Bit, 2 Flute with Ball Bearing Guide Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results, use in a router table!. Specification a° - Angle:22-1/2° D - Cutting Diameter:1-1/4" B - Cutting Length:15/16" Tool No.:49410 C - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:2-7/8" Replacement Bearing #:47706

Cutting diameter 1-7/8-Inch 1/8-Inch to 23/32-Inch cutting height 5/64-Inch radius Carbide tipped, industrial quality, Manufacturer: Amana Tool

Description Amana 54294 Double Beading Bit with Ball Bearing Guide, 2 Flute Produce pairs of beads on the edges of shelving or narrow molding strips. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" R - Radius:1/8" B - Cutting Length:3/4" Tool No.:54294 d - Shank Diameter:1/2" L - Overall Length:2-5/8" Replacement bearing #:47716

Cut dados and grooves dimensioned perfectly for plywood, flakeboard and other sheet material for which standard size bits are too large.

For high volume, high speed cutting in dense natural woods and abrasive wood composites, use solid carbide bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish.

For high volume, high speed cutting in dense natural woods and abrasive wood composites, use solid carbide bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish.

For high volume, high speed cutting in dense natural woods and abrasive wood composites, use solid carbide bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish.

Cut dados and grooves dimensioned perfectly for plywood, flakeboard and other sheet material for which standard size bits are too large.

For bevel trimming laminates with a standard router. Cutting Diameter 5/8-Inch 9/32-Inch Cutting Height 1/2-Inch Shank Carbide Tipped, Industrial Quality, Manufacturer: Amana Tool

For high volume, high speed cutting in dense natural woods and abrasive wood composites, use solid carbide bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish.

Router Bits from Amana: Solid Surface 2-Flute Bevel Router Bits

Cutting diameter 3/4-Inch 1-1/4-Inch cutting height 1/2-Inch cutting height Carbide tipped, industrial quality Fast chip removal speed, Weight: 0.35 pounds, Manufacturer: Amana Tool

Description Amana 49208 Roman Ogee Bit with Ball Bearing Guide, 2 Flute The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1" R - Radius:5/32" Tool No.:49208 B - Cutting Length:5/8" d - Shank Diameter:1/4" L - Overall Length:2-1/8" Replacement bearing ...

Description Amana 49214 Cove & Bead Bit with Ball Bearing Guide, 2 Flute The reverse cove-and-bead bit, which has the cove coming off the bearing, produces the reverse of the classical cove & bead. Radii of both cove and bead are identical. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-3/8" R - Radius:1/4" Tool No.:49214 B - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:2-5/8" Replacement bearing #:47704

Amana Tool 45445 23/32" 2-Flute 1/2" Shank C/T Straight Plunge Cutting Router Bit

This bit’s specially designed carbide center tip enhances the speed of plunge cuts. At the same time, it extends the life of the cutting edges by reducing the stress of plunge cuts on their tips. Ideal for mortising and other plunging operations.