36 results for "Amana Tool 46415 Solid Carbide Spiral Plunge 1/4 Dia x 1 Inch Cut Height x 1/4 Shank Down-Cut Router Bit" between $10.00 and $200.00

Down-cut design, great for mortising Cutting diameter 1/4-Inch 1-Inch cutting height 1/4-Inch shank, 2-flute Solid carbide, industrial quality, Manufacturer: Amana Tool

These bits are great for production settings and excellent for creating grooves and dado cuts in softwood, hardwoods, plywood and composite materials. Primarily used on CNC machines and other automatic routers. Also can be used with hand-held and table-mounted portable routers.

Description Amana 46206 Spiral Flute Plunge Bit - Down-Cut Solide Carbide - 2 Flute Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The "down-cut" cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes provides...

Amana 46416 Spiral Flute Plunge Bit - Down-Cut Solide Carbide - 2 Flute Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The "down-cut" cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes provides a superior finish...

Amana Tool Corp. 46124 - SOLID CARBIDE SPIRAL 1/2" DIA.

Amana 46316 Spiral Flute Plunge Bit - Up-Cut Solide Carbide - 2 Flute Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The "up-cut" shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. Special unique carbide grade, increased clearance...

Amana 46100 Spiral Flute Plunge Bit - Up-Cut Solide Carbide - 2 Flute Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The "up-cut" shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. Special unique carbide grade, increased clearance...

Up-Cut Tool Number: 51404. Down-Cut Tool Number: 51504. Lenght: 2". Shank: 1/4". Flute: Single. Diameter: 1/4". Cuts Plastic. Cuts Wood. Cuts Solid Surface Materials. Cuts Foam Board. (1) Amana 1/4 in Diameter Solid Carbide Spiral Plastic 'O' Flute Bit.

Amana Tool Corp. 46120 - SOLID CARBIDE SPIRAL 5/8" DIA.

Amana Tool 43820 1/4" 2-Flute Solid Carbide Straight Plunge Cutting Bit--1/4" Shank

Amana 46196 Ultratrim Solid Carbide Up-Cut Spiral Trim Router Bit, 2 Flute Spiral flush trim bit, #46196 is used for acrylic and wood (such as MDF) up to a 1/4" thick, for getting into tight corners with a small radius and great for cleaning out your edges. Specification D - Cutting Diameter:1/8" B - Cutting Length:3/8" Tool No.:46196 d - Shank Diameter:1/4" L - Overall Length:2"

For the ultimate in laminate, melamine and template work. Solid carbide up-spirals with replaceable ball bearings. Standard replacement bearing (.500" dia.), use #47706. Undersized bearing (.492" dia.), use #47715 - for use after re-sharpening. Replacement nut: use #67086

THE NEW IMPROVED Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The “up-cut” shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. The “down-cut” cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide...

Solid Carbide Mini 1/8 Compression Spiral Bit and Adapter

THE NEW IMPROVED Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The “up-cut” shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. The “down-cut” cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide...

The "down-cut" cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life. Special unique carbide grade for longer lifetime in abrasive materials. These bits are great for production settings and excellent for creating grooves and dado cuts in softwood, hardwoods, plywood and composite materials. Primarily used on CNC machines and other...

New solid carbide tools with unique circular ‘O’ flute design to eject chips more easily. Single flute for fast cutting in soft plastics such as pvc, styrene, ABS, etc.

Amana 46110 Abrasive Type Plunge Diamond Pattern Router Bit, Solid Carbide, Fine Cut This bit is designed especially for cutting fiberglass, tile and other highly abrasive materials. Works well on epoxies made with carbon, glass and composite materials. Its diamond-pattern cutting edges have up-cut and down-cut angles to grind though the work. Cuts evenly in all directions. SpecificationD - Cutting Diameter:1/4"B - Cutting Length:3/4"Tool No.:46110d - Shank Diameter:1/4"L - Overall Length:2"Type...