25 results for "Amana M0800501 Spacer" between $0.00 and $300.00

Amana Tool 55368 Steel Spacers 5/8 Overall Dia x 6.0mm Height x 5/16 Inner Diameter

Amana Tool 66210 Spacer Ring Set

Amana 55320 Specifications: Type: 90degrees "V" Large Diameter: 1-13/16" Carbide Height: 1-3/16" Shank Diameter: 1/2" Overall Length: 3-1/8"Amana 55320 Features: These assemblies are designed to cut tongue Two patterns a 1/4" bead (#55330) or a 45degrees V (#55320) are available individually or as a set. Each assembly comprises a profile cutter a rabbet cutter and groove cutter two different-size bearings a 1/2" shank arbor and a selection of washers shims and spacers. Assemble the profile cutter...

Used between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #49592 through 49622.

9/32" radius concave stile and rail, 1/4" x 3/8" tongue & groove, 5 cutter and 1 steel spacer set, 3/4" bore with 4 T-bushing reducers and 2- 3/4" to 1/2" sleeve bushings included * List Price $391.30

Finger Joint Assembly Router Bits 2-Wing With Ball Bearing Guide With this assembly, you can cut one-finger through five-fingers in multiple passes. Both cuts are performed the same way; you simply turn over the counter-cut for a perfect fit (see diagrams). All cutters feature 'chipbreakers' behind each cutting tooth which limits the thickness of the chip, allowing for a safer cut. Assembly includes 5 individual finger cutters, 1/2" shank arbor, 1 straight cutter, ball bearing guide, shims, spacers...

* Pattern Type: Ogee. * Diameter: 1-5/8". * Radius: 1/4". * Carbide Height: 1-1/16". * Shank: 1/2". * Length: 3-5/16". * These types of sets utilizes two different cutters that are 'coped' to each other. * Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set. * With trim cutters #55448 & #55450 - use on 7/8" through 1" stock use. * For 5/8" through 7/8" stock, substitute trim cutters with spacers.

This assembly is designed to create attractive V groove paneling. Included in this set are spacers to produce V paneling from 1/2", 3/4" or 1" thick stock.

2-WING These assemblies are designed to cut tongue & groove joinery for solid wood paneling. Each assembly comprises a profile cutter, a rabbet cutter and a groove cutter, two different-size bearings, a 1/2" shank arbor, a selection of washers, shims and spacers. Assemble the profile cutter, small bearing, and rabbet cutter as shown in the solid drawing to cut the tongue. To rout the groove, mount the groover and large bearing with the profiler, as shown in the ghosted drawing. This tool will...

Used between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #49592 through 49622.

The 3-Wing Variable Double Corner Round Assembly Ball Bearing, exclusive to Amana Tool®, has multiple-radii cutters that enable you to roundover both top and bottom edges in just one pass, using either of two radii. The assembly includes the arbor, a pair of multi-angle cutters, pilot bearing, spacers, and shims. Replacement parts are available separately.