109 results for "Amana 56208 Ogee Groove Router Bits - 1" Cutting Diameter; 3/8" Small Diameter" between $10.00 and $150.00

D - Cutting Diameter:1-3/8". D1 - Cutting Diameter:.522". R - Radius:13/64". Tool No.:56150. B - Cutting Length:9/16". d - Shank Diameter:1/2". L - Overall Length:2-5/8". Replacement Ball Bearing #:47734. Lock Ring #:47750.

Ogee Style Door Making Router Bits Build strong rattle-free cabinets: Eliminate panel rattle with Amana's new system designed specifically for today's plywoods! Cuts frame stock 5/8" through 1-1/4" thick Each set includes 2 pcs. (1 for stile cuts and 1 for rail cuts and shims)Adjust the panel groove width: 1/4" plywood: 3/16" to 9/32" 1/2" plywood: 7/16" to 17/32" The perfect fix for undersized plywood flat panel "Mission Style" cabinet doors. Designed to cut precise grooves to provide undersized...

Amana 49708 Round Over Groove Router Bit, 2 Flute This bit creates a flat-bottom groove between two quarter-round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending upon the cut depth adjus ent, the radii can be flush with the work surface or recessed. The profile can be formed on an edge using an edge guide or, on the router table, a fence. Specification D - Cutting Diameter:1-3/4" D1 - Cutting Diameter:.500" R - Radius:5/8" B - Cutting Length...

Amana 54146 Classical Cove Bit with Ball Bearing Guide, 2 Flute A cove flanked by step fillets, a classical project used in period moldings, is produced by this tool. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-3/8" R - Radius:5/16" Tool No.:54146 B - Cutting Length:5/8" d - Shank Diameter:1/4" L - Overall Length:2-1/8" Replacement bearing #:47706

Designed to cut precise grooves to provide undersized plywood veneered panels with a snug rattle free fit. Adjust the panel groove width (3/16" to 9/32" for 1/4" plywood - 7/16" to 17/32" for 1/2" plywood).Cut frame stock for 5/8" through 1-1/4" in thickness. Each set includes 2 pcs. (1 for stile cuts & 1 for rail cuts and shims).Carbide- tipped for longer cutting tool life.

This bit’s specially designed carbide center tip enhances the speed of plunge cuts. At the same time, it extends the life of the cutting edges by reducing the stress of plunge cuts on their tips. Ideal for mortising and other plunging operations.

D - Cutting Diameter:2-5/8". *'A' - Reveal:1-1/16". R - Radius:3/4". Tool No.:54118. B - Cutting Length:5/8". B1 - Cutting Length:5/16". d - Shank Diameter:1/2". L - Overall Length:2-1/2". Type:Ogee. Replacement bearing #:47706.

Note: 90° 'V' Groove Bits are for decorative purposes and are not intended for 'miter-folding', etc. *1/4" shank not recommended and not guaranteed. †2 Flute 60° 'V' Groove Bit designed for lettering, signmaking and decorative work.

d=1/2" D=3/4" I=1" S=1/2" An absolutely indispensible bit for making cabinets. The CMT Flush and V-Groove bits allow you to make cabinet front frames in 1" stock that fit perfectly with the sides. The added V-cutter feature cuts a decorative groove along the hinge joint to hide the seam. This CMT Flush & V-Groove Bit has a 1/2" (12.7 mm) cutting diameter, a 3/4" overall diameter, a 1" cutting length, and a 1/2" shank.

55414 Wedge Tongue & Groove 2-Flute Router Bit (2-piece set) Features Can be used for T & G florring or other applications requiring a wedge pattern type. Available individually or as a 2-piece set, set includes #55410 (Wedge groove) and #55412 (Wedge tongue) Dimensions 55410 - Wedge Groove Bit Diameter: 1-1/4" Cutting length: 1/4" Shank: 1/2" Overrall length: 2-3/4" 55412 - Wedge Tongue Bit Diameter: 1-1/4" Cutting length: 1/4" Shank: 1/2" Overrall length: 2-3/4"

Amana 56178 Beading Groove Router Bit, 2 Flute Quarter-round profile is formed by this bit as it grooves, one on each side of a flat. The scale and depth of the beading profile distinguishes it from the roundover. Used with a fence or edge guide, this beading bit can be used as an edge former. Specification D - Cutting Diameter:1-1/8" D1 - Cutting Diameter:1/2" R - Radius:5/16" Tool No.:56178 B - Cutting Length:9/16" d - Shank Diameter:1/2" L - Overall Length:2-3/4" WARNING: Maximum RPM = 14,000

Amana Tool 47100 - 3/8" x 1" Flush Trim Router Bit Amana Tool 47100 3/8" x 1" flush trim router bit has a 1/4" shank Includes guide bearing 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size 2 flute OAL: 2-5/8" A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes Excellent for template work The bearing follows the template, while the cutting edges trim the workpiece With the router handheld, the template is on the bottom of...

Amana 49412 30º Chamfer Router Bit, 2 Flute with Ball Bearing Guide Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results, use in a router table!. Specification a° - Angle:30° D - Cutting Diameter:1-3/8" B - Cutting Length:13/16" Tool No.:49412 C - Cutting Length:7/8" d - Shank Diameter:1/4" L - Overall Length:2-1/4" Replacement Bearing #:47704

To order this product visit our website at primetimesolutions.com or call 800-333-9325 and ask for SKU# FR39-240

This set is for making 1-3/4" thick entry doors with an ogee sticking. Amana Tool®'s newest design allows you to make beautiful doors with tenons of any length you choose. Get beauty of traditional cope and stick doors with the strength and longevity of true mortise-and-tenon joiner, today. This unique door-making system utilizes a “stub” spindle & cope cutter arrangement. The counterbored cope cutter is secured to the spindle with a cap screw. A matching profile bit is used to shape the decorative...

Amana Tool 45190 - 1/16" x 3/16" Straight Router Bit Amana Tool 45190, 1/16" x 3/16" straight router bit has a 1/4" shank 2-flute OAL: 1-5/8" This bit features the new generation of high wear outstanding carbide Solid carbide cutting edge Not guaranteed due to extreme diameter New superior geometric design New advanced automatic grinding technology that improves the carbides' resistance to wear Super clean cuts 200% longer life time even when working with abrasive materials Cost effective In choosing...

Designed to cut precise grooves to provide undersized plywood veneered panels with a snug rattle free fit. Adjust the panel groove width (3/16" to 9/32" for 1/4" plywood - 7/16" to 17/32" for 1/2" plywood). Cut frame stock for 5/8" through 1-1/4" in thickness. Each set includes 2 pcs. (1 for stile cuts & 1 for rail cuts and shims). Carbide- tipped for longer cutting tool life.