215 results for "Amana 55388Glue Joint 1/2" Shank Router Bit" between $10.00 and $150.00

Route finger joints quickly and accurately! Ideal for joining wood end-to-end as well as edge-to-edge. Rout one workpiece face up, the other face down. When the bit height is correct, the two pieces should slide together with their faces perfectly flush. This assembly includes five 2-wing finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank arbor, shims, spacers, and washers. The number of finger cutters used varies with the stock thickness; it can handle stock between...

* Thickness: 35/64". * Radius: 17/64". * Carbide height: 1". * Diameter: 1-1/32". * Shank: 1/2". * Length: 2-1/2". * Shape the full edge of a workpiece with a bullnose radius bit. * Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. * The “nose diameter” is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. * Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter...

* Pattern Type: Ogee. * Diameter: 1-5/8". * Radius: 1/4". * Carbide Height: 1-1/16". * Shank: 1/2". * Length: 3-5/16". * These types of sets utilizes two different cutters that are 'coped' to each other. * Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set. * With trim cutters #55448 & #55450 - use on 7/8" through 1" stock use. * For 5/8" through 7/8" stock, substitute trim cutters with spacers.

* A Reveal: 1-1/16". * Radius: 3/4". * Diameter: 2-5/8". * Carbide Height: 5/8". * Shank: 1/2". * Length: 2-1/2". * Replacement bearing #47706 (sold separately).

Description Amana 49414 30º Chamfer Router Bit, 2 Flute with Ball Bearing Guide Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results, use in a router table!. Specification a° - Angle:30° D - Cutting Diameter:1-3/8" B - Cutting Length:13/16" Tool No.:49414 C - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:2-3/4" Replacement Bearing #:47706

* Cutting Diameter: 1/2". * Cutting Height: 1-1/2". * Shank Diameter: 1/2". * Length: 3-1/8". * 600-grit finish micrograin carbide tips. * High precision CNC machined tool body and tip profile. * Radial relief grind. * New advanced automatic grinding technology that improves the carbides' resistance to wear. * Super clean cuts. * 200% longer life time even when working with abrasive materials. * Cost effective.

Application: To inlay wood veneer, plastics, brass and other metals, into the face or edge of material. Three ball bearings are provided with each tool to perform three different inlay depths (A=1/16", 1/8" or 3/16"). Includes #5003 5/32" hex key. Replacement Bearings: When 'A'= 1/16" use #47714 bearing When 'A'= 1/8" use #47712 bearing When 'A'= 3/16" use #47701 bearing

Amana Tool 55400 - Tongue and Groove Router Bit Amana Tool 55400 tongue and groove router bit has a 1/2" shank 2 wing with ball bearing guide Cut perfectly fitted tongue-and-groove joints on stock between 1/2" and 3/4" thick with a table-mounted router and this assembly The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings To cut tongues, sandwich one bearing between the two cutters To cut slots, mount one cutter between the two bearings...

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

Amana Tool 45445 23/32" 2-Flute 1/2" Shank C/T Straight Plunge Cutting Router Bit

GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...

Application: For sink cut-outs and to prepare countertop for topmount installation of sink or bowl. Among others, can be used for Corian® sink & bowl #'s 830A, 825RA, 852LA and 854RA.

Application: Use with corner rounding bits, to cut a full 180° bull-nose on 1/2", 1", 1-1/2" or 2" thick stock without turning the material over. (Two 30"x98"x1/2" laminated sheets = 200 lbs. +). Also useful for 'on-site' cutting where a conventional round-over cannot be used. Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide. Replacement 'Ultra-Guide™' bearing #47737 (after 6/95). Replacement steel bearing #47738 (prior to 6/95). Replacement collar #47740. Warning: Maximum...

For the ultimate in laminate, melamine and template work. Solid carbide up-spirals with replaceable ball bearings. Standard replacement bearing (.500" dia.), use #47706. Undersized bearing (.492" dia.), use #47715 - for use after re-sharpening. Replacement nut: use #67086

Proportion alone distinguishes this bit from the series above. This one cuts a deep, 1/2-inch-wide groove with small-radius shoulders. It can be used in a handheld or table-mounted routers; the cut must be guided by an edge-guide or fence.

carbide-tipped 2 flute thumbnail table edge/handrail router bit, 2-3/4" diam, 1/2" shank