131 results for "Amana 542131/8" Radius Triple Bead Router Bit" between $25.00 and $150.00

Create ornate multiple beads in decorative moulding and furniture. Each bit comes with a 3/4" bearing. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

Kickback reducing design Individually computer balanced Precision ground for the smoothest cuts Covered by Freud's limited lifetime warranty, Weight: 0.5 pounds, Manufacturer: Freud

Amana 54213 Triple Beading Bit with Ball Bearing Guide, 2 Flute Three uniform beads are formed in one pass with this bit. Produce reeded pilasters or table legs referencing opposite faces of the workpiece. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" Type:Bead R - Radius:1/8" Tool No.:54213 B - Cutting Length:1" d - Shank Diameter:1/2" L - Overall Length:3" Replacement bearing #:47716

Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut Classic woodworking design, Weight: 0.2 lbs., Manufacturer: Vermont American

Description Amana 49208 Roman Ogee Bit with Ball Bearing Guide, 2 Flute The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1" R - Radius:5/32" Tool No.:49208 B - Cutting Length:5/8" d - Shank Diameter:1/4" L - Overall Length:2-1/8" Replacement bearing ...

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

Amana 54408 Crown Molding Bit, 2 Flute Produce mid-sized crown, cove, and bead molding profiles for architectural and furniture applications. The bit cuts the profile and bevels, as necessary, the show face of the workpiece. Bevel the top and bottom edges on the table saw to complete the molding. Use a 2+-horsepower router, mounted in a table, with a fence to guide the work. To prolong cutter life, reduce strain on the router. To get the best cut finish, make several passes to achieve full cut depth...

This dual purpose bit produces both moldings and joints. Use in place of matched flute-and-bead sets to mill the edges of strips used in various stave constructions like planters, canoes and hot tubs. Switch from fluting to beading by raising or lowering the bit. Pilot bearing allows use for template-guided cuts.Carbide tippedIndustrial qualityRecommended for router table use; smaller sizes can be used with an edge-guide equipped portable router.

Amana Tool 54213 3" x 7/8" Triple Beading/Triple Fluting Router Bit 1/2" ShankAmana Tool 54213 3" x 7/8" Triple Beading/Triple Fluting Router Bit 1/2" Shank Features:• Three uniform beads or flutes are performed in one pass with these bits• Produce reeded or fluted pilasters or table legs referencing opposite faces of the workpiece• Can be used in a handheld or table-mounted router• 3" length• 7/8" cutting diameter• 1/8" radius• 1/2" shank

Three different radii of beads are stacked on this one bit! Rout all three on an edge, or use it to nose thin stock. Carbide tippedIndustrial qualityReplacement item for #54214Router-table use recommended for best control, but use in a handheld router is possible. Must be used with an edge guide.

Description Amana 54294 Double Beading Bit with Ball Bearing Guide, 2 Flute Produce pairs of beads on the edges of shelving or narrow molding strips. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" R - Radius:1/8" B - Cutting Length:3/4" Tool No.:54294 d - Shank Diameter:1/2" L - Overall Length:2-5/8" Replacement bearing #:47716

Amana Tool 55441 Carbide Tipped 2-Piece Stile and Rail 1-5/8 Dia x 11/16 Cut Height x 3/16 Radius x 1/2 Inch Shank Router Bit Set

Amana 54200 Specifications: Bead radius: 7/32" Large diameter: 2-1/4" Carbide height: 1-7/8" Shank diameter: 1/2" Overall length: 4" Max RPM: 12 000 Amana 54200 Features: This tool was designed to cut over 40 different molding patterns. By making simple adjustments to the cutter height and fence position and making two or more passes you can achieve a wide variety of profiles and architectural details. Recommended for use in a router table. Available with 1/2" shank only. (sold separately) Tool No...

Amana Tool 54114 1/4" Radius, 1-5/8" Cut Diameter, 3/4" Cut Length, 1/2" Shank, 2 Flute, Ogee Fillet Router Bit

Description Amana 56108 Classical Groove Router Bit, 2 Flute Use this bit to form a bead-sided groove with a rounded bottom to embellish solid wood surfaces. It can be used in handheld, table-mounted, and CNC routers, guiding using an edge guide, a fence, or, in conjunction with a template guide bushing. Specification D - Cutting Diameter:1/2" R - Radius:3/32" R1 - Radius:9/64" Tool No.:56108 B - Cutting Length:7/16" d - Shank Diameter:1/4" L - Overall Length:2"

Enhances mouldings and furniture with multiple beads or fluting. Each bit comes with a 3/4" bearing. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

Amana Tool 54127 - 3/8" Radius Ogee Fillet Router Bit Amana Tool 54127 3/8" radius Ogee Fillet router bit has a 1/2" shank 2 flute with ball bearing guide R1 is 3/8" R2 is 3/8" 15/16" depth of cut OAL: 2-5/8" WARNING: 18,000 RPM MAXIMUM