188 results for "Amana 53812Finger Grip Router Bits 1/2" Shank" between $10.00 and $150.00

Produce clean, modern chests and cabinets uninterrupted by hardware pulls and knobs by integrating the pulls into the doors, drawers and lips. These one-pass cutters offer many appearance and ergonomic options, providing positive grips and softened, easy-on-the-fingers edges. All bits can be used in CNC and table mounted routers.

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

1-1/8" x 1/8" & 1/4" rad. 2-Flute C/T Bull Nose/Cove Edge Router Bit -- 1/2" Shank

Second piece is cut 'upside-down' to the first for a perfect fit. There is no need to realign the router depth, provided that the wood is centered to the cutting edge of the bit. For 5/8" through 1" material.

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...

Route finger joints quickly and accurately! Ideal for joining wood end-to-end as well as edge-to-edge. Rout one workpiece face up, the other face down. When the bit height is correct, the two pieces should slide together with their faces perfectly flush. This assembly includes five 2-wing finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank arbor, shims, spacers, and washers. The number of finger cutters used varies with the stock thickness; it can handle stock between...

carbide-tipped 2 flute thumbnail table edge/handrail router bit, 2-3/4" diam, 1/2" shank

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/16". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/8". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.

Build quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits...

NOW CREATE CROWN MOLDING UP TO 4-1/2" WIDE! 2 Flute - 1/2" Shank Make extra-large architectural crown moldings with your table-mounted router. Our new extender bit enables you to make unique crown moldings in any wood you want. You're no longer limited to the small selection of crown moldings at the lumber dealer. This specially designed bit works in conjunction with either our vertical or horizontal crown molding bits allowing you to make crown moldings up to 4-1/2" wide. Bevel back edges, cutting...

TRS-140 1/2" Shank This set enables you to construct your own beautiful arched raised panel doors with 6 of the most popular professional quality router bits. Custom-made hardwood storage case included.

Amana Tool 45445 23/32" 2-Flute 1/2" Shank C/T Straight Plunge Cutting Router Bit