84 results for "Amana 532061/8 Kerf Cutter Router Bit 3 Wing" between $10.00 and $150.00

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/4". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch

Amana 54221 Specifications: A Reveal: 1-3/8" Diameter: 3-3/8" Radius: 7/8" Carbide height: 1-3/16" Shank: 1/2" Length: 3-1/16"Amana 54221 Features: Replacement bearing #47713 (8MMx16MM) and #47763 (8MMx1-1/4"). Back Cutter #55435=1/4" Kerf; 5/16 Radius Cutter. Note: Reveal ( 'A') shown on tools reflects the total length of cut. Therefore you must deduct (usually 3/8") for allowing the panel to recess into the frame.

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch

Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch

Cutting diameter 1-7/8-Inch 1/8-Inch to 23/32-Inch cutting height 5/64-Inch radius Carbide tipped, industrial quality, Manufacturer: Amana Tool

Whiteside 3-wing slotting cutters are superior to straight router bits for slotting the edges of boards. Carbide tips cut spline joints in solid wood, plywood, and particle board. A kerf 1/2" deep is cut quickly and cleanly. Cutters require Woodcraft #24D68 or #24D69 arbor to operate. * 5/32" Slotting Cutter is the proper size for cutting plate joiner biscuit slots.

For producing slots 1/8-Inch to 1-1/8-Inch thick Carbide Tipped, Professional Quality 1/2-Inch Shank Includes Timberline and reg; bits with kerfs of: 1/8-Inch, 5/32-Inch, 3/16-Inch and 1/4-Inch. Includes 1/2-Inch arbors and sealed bearings for depth control. Custom-made hardwood storage case included., Manufacturer: Timberline

Whiteside 3-wing slotting cutters are superior to straight router bits for slotting the edges of boards. Carbide tips cut spline joints in solid wood, plywood, and particle board. A kerf 1/2" deep is cut quickly and cleanly. Cutters require Woodcraft #24D68 or #24D69 arbor to operate. * 5/32" Slotting Cutter is the proper size for cutting plate joiner biscuit slots.

Includes: Cutter, Arbor and Ball Bearing Guide An assembly offers the option of switching cutters—from flush trim to either of two bevel trims—without removing the bit from the router or evenchanging the depth-of-cut setup. Four flutes yield a smooth, crisp cut finish. All parts can be replaced individually.  

Whiteside 3-wing slotting cutters are superior to straight router bits for slotting the edges of boards. Carbide tips cut spline joints in solid wood, plywood, and particle board. A kerf 1/2" deep is cut quickly and cleanly. Cutters require Woodcraft #24D68 or #24D69 arbor to operate. * 5/32" Slotting Cutter is the proper size for cutting plate joiner biscuit slots.

Amana 57112 Face-Inlay Bit with 3 Ball Bearing Guides, 2 Flute With the router resting securely on the top surface, you can groove countertop edges for decorative wood veneer, plastics, brass, or other metal inlays. Three ball bearings are provided to produce three different inlay depths - 1/16", 1/8" or 3/16". Includes #5003 5/32" hex key. Specification D - Cutting Diameter:7/8" B - Cutting Length:3/4" A:1/16", 1/8", 3/16" Tool No.:57112 d - Shank Diameter:1/2" L - Overall Length:3-1/2" Replacement...

Amana Tool 55342 Ogee Profile Cutter for 55340 Router Bit

The Porter-Cable 43532PC is a 3 Wing Slot Cutter uses a saw blade style action provides a smooth cut and delivers effective chip removal. A common use for slotting cutters is the installation of T-moldings, weather stripping and tongued wood edgings. Slotting cutter is also used to join wood by cutting slots for reinforcing splines. Features: Diameter: 1-7/8-inch Depth of Cut: 1/2-inch Kerf Thickness: 0.156-inch What's in the Box: Porter-Cable 43532PC 3-Wing Slot Cutter

Amana Tool 47502-L BEVEL 4 WING CUTTER LEFT HAND ROUTER BIT

Bosch, 85609M, Router Bits,NA, Accessory, Slotting Cutters 3/16" Kerf 3 Wing Slotting CutterBosch parts keep your tools working their best for any application you can come up with.Features:3/16" Cutting Edge Length1-7/8" Diameter3/16" KerfBosch has been in the headlines of state of the art development for over 100 years. From the invention of the jigsaw to their ergonomic designed tools, Bosch as cared about the customer since they started business in 1886.