132 results for "Amana 51582Convex Edge 1/2" Shank" between $25.00 and $150.00

The patented Nova System™ gives you a wide range of profiling options in a single router bit with specially formulated replaceable carbide tips, which are harder, stronger and longer lasting. These Replaceable blades also offer better performance in abrasive material Nova System™ consists of two body styles, a router bit with a ball bearing guide, designed for use with portable routers and a router bit without a ball bearing guide for surface work or profiling that can be used with portable or CNC...

This versatile bit may be used to shape table edges on top, bottom or both. The optional 3/16" bearing adds a reveal to table tops. In addition, it can be used to form the top of hand rails.

carbide-tipped 2 flute triple edge beading bit, 1/8" radius, 1/2" shank

Use in place of matched flute-and-bead bit sets to mill the edges of strips used in various stave constructions like planters, canoes and hot tubs.

carbide-tipped 2 flute wide classical ogee table edge bit, 2-1/2" OD, 1/2" shank

D - Cutting Diameter:1-3/16". R - Radius:15/32". R1 - Radius:-". Tool No.:49542. B - Cutting Length:3/8". d - Shank Diameter:1/2". L - Overall Length:2-1/4". Standard 1/2" bearing #:47706 (included)". Optional 3/8" bearing #:47702 (order separately)".

Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own? With the wide range of decorative possibilities offered by CMT Molding Bits, you can always create the edge profile you want, anywhere you want and any time you want. These CMT bits are made to last a lifetime - carbide tipped cutters and solid bar stock steel shanks withstand serious use and the trademark orange Teflon Industrial Coating makes sure you continuously get clean, smooth...

Description Amana 54302 Edge Fluting Bit with Ball Bearing Guide, 2 Flute This bit produces a fingernail flute, rather than a full 180° radius flute. Creates an interesting edge detail, and it can be used to make small-scale cornice-type moldings. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:3/4" R - Radius:5/16" B - Cutting Length:1/2" Tool No.:54302 C - Cutting Length:1/8" d - Shank Diameter:1/2" L - Overall Length:2-3/4" Replacement bearing #:47706

Amana 54208 Edge Beading Bit, 2 Flute Similar to the corner bead, but with a radiused, rather than a hard-edged quirk. Since this bit lacks a pilot, it must be used with a fence or edge guide. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" D1 - Cutting Diameter:1/2" R - Radius:5/32" Tool No.:54208 B - Cutting Length:1-1/32" d - Shank Diameter:1/2" L - Overall Length:2-3/4"

Second piece is cut 'upside-down' to the first for a perfect fit. There is no need to realign the router depth, provided that the wood is centered to the cutting edge of the bit. For 5/8" through 1" material.

Specially designed Forstner bits for cutting telephone and computer wire grommet access holes in office furniture. All tools feature precision ground and tempered tool steel , multi-tooth cutting edges for faster cutting and chip removal, and massive cutter body to dissipate heat and resist burning.

Produce clean, modern chests and cabinets uninterrupted by hardware pulls and knobs by integrating the pulls into the doors, drawers and lips. These one-pass cutters offer many appearance and ergonomic options, providing positive grips and softened, easy-on-the-fingers edges. All bits can be used in CNC and table mounted routers.

Overhead pilot flush trim bits are ideal for template-guided shaping, pattern duplication, edge truing, etc. Maximum depth of cut is greater than the bits' cutting length; when part of the workpiece is trimmed, remove the template and use the work itself as a guide.

The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece. With a handheld router, the template must be on top of the workpiece. With a table-mounted router, the template must be on bottom of the workpiece.

Reproduce Shaker beveled panel edges with this 2 pc 1/2" Shank Shaker Door Bit. Made in Israel.

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/16". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

* # Wings: 2. * Diameter: 1-7/8". * Kerf: 1/8". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...