22 results for "Amana 49500 Corner Rounding Router Bit - Ball Bearing Guide, 1/4" Shank, 3/16" Radius" between $25.00 and $150.00

Amana Tool exclusive corner rounding miniature bit 1/8-Inch Radius, 7/16-Inch Cutting Diameter 3/8-Inch Cutting Height, 1-13/16-Inch Length 1/4-Inch Shank, 2 Flute Carbide Tipped, Industrial Quality, Manufacturer: Amana Tool

Eliminate the time-consuming hand-filing that normally follows each laminate cutting job. Cutting a fillet, using a standard corner rounding bit, leaves a sharp edge on the laminate. This unique bit “breaks” the sharp edge of the laminate, as it cuts the fillet together with a quarter-round shape in one pass.

Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass by this bit. The width of one fillet is set by the pilot bearing size, while the other is controlled by the depth of cut. A beading bit can be transformed into a corner rounding bit by changing the bearing (and vice versa).

Amana 57139 Corner Rounding Bit with Ultra-Glide Ball Bearing Guide Assembly, 2 Flute Use this bit for rounding edges where there's access to a flat surface for the Ultra-Glide non-marring bearing to reference. Used in concert with either the Counter-top ('No-Drip') Design bit or the corner-rounding bit with a radius bearing, this bit will produce a no-drip edge or a bullnose in two passes. Specification D - Cutting Diameter:1-1/2" A:- R - Radius:1/2" Tool No.:57139 B - Cutting Length:3/4" d -...

The basic edge forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.

D - Cutting Diameter:1-3/8". R - Radius:1/4". R1 - Radius:13/32". Tool No.:56140. B - Cutting Length:9/16". d - Shank Diameter:1/2". L - Overall Length:2-5/8". Replacement Ball Bearing #:47734. Lock Ring #:47750.

The basic edge forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.