|
Amana Tool 49406 - 45 Degree Chamfer Router Bit
Amana Tool 49406 - 45 Degree Chamfer Router Bit Amana Tool 49406, 45 degree chamfer router bit has a 1/2" shank 1" depth. Note: Will completely chamfer 1" material 1-3/8"" diagonal OAL: 3" Chamfer or bevel edges for decorative effect or to form edge miter joints Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes (with appropriate degree chamfer bit) NOT FOR USE IN A HAND HELD ROUTER 
|
$86.89
etoolsrus.com
|
Top stores
etoolsrus.com
$86.89
|
|
Amana Tool 49214 1-3/8" Cove & Bead Router Bit with Ball Bearing Guide, 1/2" Shank
Description Amana 49214 Cove & Bead Bit with Ball Bearing Guide, 2 Flute The reverse cove-and-bead bit, which has the cove coming off the bearing, produces the reverse of the classical cove & bead. Radii of both cove and bead are identical. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-3/8" R - Radius:1/4" Tool No.:49214 B - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:2-5/8" Replacement bearing #:47704
|
$49.84
circlesaw.com
|
Top stores
circlesaw.com
$49.84
|
|
Amana Tool 49360 2" 2-Flute C/T Superabbet™ Router Bit w/Ball Bearing Guides -- 1/2" Shank
Particularly useful when working with large stock or when a precise rabbet depth is required
|
$75.99
toolbarn.com
|
Top stores
toolbarn.com
$75.99
|
|
Amana Tool 57220 Carbide Tipped Chamfer with Ultra-Glide Ball Bearing Guide Solid Surface 2 Dia x 3/4 Cut Height x 45 Deg Angle x 1/2 Inch Shank Router Bit
Chamfer w/ Ultra-Glide Bearing Router Bits
|
$83.21
|
Top stores
Toolstoday.com
$83.21
|
|
Amana Tool 56150 1-3/8" Classical Groove Router Bit Ball Bearing Guide
D - Cutting Diameter:1-3/8". D1 - Cutting Diameter:.522". R - Radius:13/64". Tool No.:56150. B - Cutting Length:9/16". d - Shank Diameter:1/2". L - Overall Length:2-5/8". Replacement Ball Bearing #:47734. Lock Ring #:47750.
|
$78.64
circlesaw.com
|
Top stores
circlesaw.com
$78.64
|
|
Amana Tool 53610 1-7/8" 3-Wing C/T Box Joint Set Router Bit w/Ball Bearing Guide -- 1/2" Shank
Product Description The "Box Joint" set contains 3-wing slotting cutters and spacers for producing jewelry boxes, drawers, etc. Complete with cutters, spacers, arbor and ball bearing to achieve 1/2" depth of cut. Recommended stock thickness (height): 3/4" through 1-5/8". For material over 1-5/8", two passes will accomplish joints up to 3".
|
$105.99
toolbarn.com
|
Top stores
toolbarn.com
$105.99
|
|
Amana Tool 57122 10° Bevel Bowl Solid Surface Router Bit w/Ultra-Glide Ball Bearing Guide (1/2" Shank)
Compatible with Corian® sink & bowls: 804A, 805A, 830A, 852LA, 852RA, 854RA, 802S, 804S, 805S, 809S, 810S, and 871S
|
$105.99
toolbarn.com
|
Top stores
toolbarn.com
$105.99
|
|
Amana Tool 49414 30° 1-3/8" Chamfer Router Bit, 1/2" Shank
Description Amana 49414 30º Chamfer Router Bit, 2 Flute with Ball Bearing Guide Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results, use in a router table!. Specification a° - Angle:30° D - Cutting Diameter:1-3/8" B - Cutting Length:13/16" Tool No.:49414 C - Cutting Length:7/8" d - Shank Diameter:1/2" L - Overall Length:2-3/4" Replacement Bearing #:47706
|
$30.71
circlesaw.com
|
Top stores
circlesaw.com
$30.71
|
|
Reversible Crown Molding Router Bit #54412
GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...
|
$75.34
|
Top stores
Toolstoday.com
$75.34
|
|
Amana Tool 51570 17/64" Bull Nose Radius Router Bit, 1/2" Sh w/BB Guide
Description Amana 51570 Bullnose Router Bit with Ball Bearing Guide, 2 Flute Very useful for template or pattern routing. Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Specification M:35/64" R - Radius:17/64" B - Cutting Length:1" Tool No.:51570 D - Cutting Diameter:1-1/16" d - Shank Diameter:1/2" L - Overall Length:2-7/8" Replacement bearing #:47706
|
$69.23
circlesaw.com
|
Top stores
circlesaw.com
$69.23
|
|
Round Under w/ Upper Ball Bearing Router Bits
Use with Corner Rounding bits to cut a full 180° bullnose on 1/2", 1", 1-1/2" or 2" thick stock WITHOUT TURNING THE MATERIAL OVER. (Two 30" x 98" x 1/2" laminated sheets = 200lbs.+). Also useful for on-site cutting where a conventional round-over can not be used. Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing. Carbide-Tipped.
|
$137.25
|
Top stores
Toolstoday.com
$137.25
|
