23 results for "Amana 49404Chamfer Bit 2" Diameter 1/2" Shank Router Bit" between $10.00 and $150.00

Full color instructions included. Learn step-by-step with Master Craftsman Lonnie Bird. 2-11/16 Diameter, 1-3/16-Inch Cutting Height, 45 Degree Radius, 1/2-Inch Shank. Carbide Tipped, Industrial Quality. For 1/2 - 1-1/8-Inch material. Max RPM = 18,000!.

Amana 45732 90º V-Groove Router Bit, 1/2" Shank, 2 Flute Cut decorative 'V' grooves and lettering on signs with this v-groove bit. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers. SpecificationD - Cutting Diameter:2"a° - Angle:90°B - Cutting Length:1-3/4"Tool No.:45732B1 - Cutting Length:1"d - Shank Diameter:1/2"L - Overall Length:3-1/4"

Description Amana 49207 Roman Ogee Bit with Ball Bearing Guide, 2 Flute The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:2" R - Radius:3/8" Tool No.:49207 B - Cutting Length:1" d - Shank Diameter:1/2" L - Overall Length:3" Replacement bearing #:47706

Amana Tool 45505 - 1-1/4" Diameter Mortising Router Bit Amana Tool 45505 1-1/4" diameter mortising router bit has a 1/2" shank 2-flute OAL: 2-1/8" Use for cutting shallow mortises for hinges and locksets The cutting geometry is calculated to produce an exceptionally clean cut with crisp edges Large gullet between the two flutes allows greater chip clearance and removal Intended for hinge mortising, this bit is also an excellent choice for cutting laps and tenons The sides and bottom of the cut are...

Amana 54100 Classical Bead & Cove Bit with Ball Bearing Guide, 2 Flute The positions of the bead and the cove are reversed on this bit, with the bead coming off the bearing. With the optional 3/8" pilot bearing, the bit produces a fillet at the base of the bead. Use in either handheld or table-mounted routers. Largest diameter bits should be run at reduced speed. Specification D - Cutting Diameter:2" R - Radius:11/32" R1 - Radius:11/32" Tool No.:54100 B - Cutting Length:1-1/4" d - Shank Diameter...

Description Amana 45480 Straight Plunge Router Bit, 1/2" Shank - 2 Flute Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. SpecificationD - Cutting Diameter:1/2"B - Cutting Length:1-1/4"Tool No.:45480d - Shank Diameter:1/2"L – Length:2-7/8"

For the ultimate in laminate, melamine and template work. Solid carbide up-spirals with replaceable ball bearings. Standard replacement bearing (.500" dia.), use #47706. Undersized bearing (.492" dia.), use #47715 - for use after re-sharpening. Replacement nut: use #67086

1/2" Shank. 2 Flute Carbide tipped With Ball Bearing Guide. Super clean cuts. 200% longer life. D: 1-1/2" R1: 1/4" B: 2" d: 1/2" L: 3-1/2".

carbide-tipped 2 flute thumbnail table edge/handrail router bit, 2-3/4" diam, 1/2" shank

1/2" Shank. 2 Flute Carbide tipped With Ball Bearing Guide. Super clean cuts. 200% longer life. D: 1-5/8" R1: 1/8" R2: 3/8 R3: 1/4 B: 1-1/8" d: 1/2" L: 3".

Amana Mortising bit with 1/4" shank. 1/2" diameter, 3/4" carbide height. Super clean cuts and as well as Cost effective. Designed for the mobile home and R.V. industries, for fast cut out work.

Amana Tool 45426 - 1/2" x 2" Straight Router Bit Amana Tool 45426, 1/2" x 2" straight router bit has a 1/2" shank 2-flute OAL: 4-1/4" This bit features the new generation of high wear outstanding carbide New superior geometric design New advanced automatic grinding technology that improves the carbides' resistance to wear Super clean cuts 200% longer life time even when working with abrasive materials Cost effective In choosing a straight bit for any application, always select one with the shortest...