1397 results for "Amana 477241/2" Collar Router Bit" between $10.00 and $150.00

* Inside Diameter: 1/2". * Outside Diameter: 23/32". * Thickness: 15/64" (.234). * Use with Tools No. 45463, 45465, 45467, 45991 (all sold separately).

Amana 47724 Ball Bearing Retaining Collar To retain bearings on tools furnished with upper ball bearing guides. Includes #67091 screw. Specification d - Inside Diameter:1/4" D - Outside Diameter:7/16" Tool No.:47724 Face Thickness:.203" (13/64") Used on Tool #'s:45460, 45461, 45462, 45464, 45750, 45850, 45950, 45988, 54190, 54192, 54194

Ingenious rabbeting bits that will enable rabbet cuts from flush through 3/4" in 1/16" increments, and five undersized plywood sizes, using optional collars. Particularly useful when working with large stock, or when a precise rabbet depth is required (ie. 23/32 depth for plywood). There are 18 different rabbet sizes available between the standard and optional collars. The basic tools (#49360 & RC-49360) are supplied with a 2" diameter rabbet bit, hex key, instructions and all necessary parts for...

Amana 49410 Specifications: Degree of angle: 22-1/2degrees Large diameter: 1-1/4" Carbide height: 15/16" Cutting length: 7/8" Shank diameter: 1/2" Overall length: 2-7/8" Amana 49410 Features: Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp uniform edges at accurate angles to make 4- 6- 8- 12- or 16-sided boxes. For best results use in a router table!

Amana 45448 Specifications: Cutting Diameter: 1" Cutting Height: 1-1/4" Shank Diameter: 1/2" Length: 2-7/8"Amana 45448 Features: 600-grit finish micrograin carbide tips High precision CNC machined tool body and tip profile Radial relief grind New advanced automatic grinding technology that improves the carbides' resistance to wear. Super clean cuts. 200% longer life time even when working with abrasive materials. Cost effective

D - Cutting Diameter:1/2". a° - Angle:90°. B - Cutting Length:1/2". Tool No.:45750. d - Shank Diameter:1/4". L - Overall Length:2". Type:V-Groove. Replacement Bearing:47701. Replacement Collar:47724.

Amana 54296 Multi-Edge Beading Bit with Double Ball Bearings, 2 Flute Produce beading detail on edges or moldings. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:1" R - Radius:1/16" B - Cutting Length:7/8" Tool No.:54296 d - Shank Diameter:1/4" L - Overall Length:2-7/8" Replacement bearing #:47712 (2 required) Replacement collar #:47724

GIVE YOUR CEILINGS THAT FINISHED LOOK! 2 Flute - 1/2" Shank With this bit you can easily make classic crown moldings with your table-mounted router. The beautiful profile is a large cove flanked by roundovers. Use your fence to control the cutting depth and a featherboard to keep the stock firmly positioned against the fence. Afterwards, bevel the back edges with one of our chamfer bits. Bevel back edges, cutting off 45º excess, with Amana Tool®'s #49406 chamfer bit. For use in a table-mounted...

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

The dovetail joint is the strongest construction method for drawers, boxes, chests and fine casework. Many router dovetail jigs require special bits for cutting half-blind and through dovetails.

D - Cutting Diameter:3/4". B - Cutting Length:50mm. d - Shank Diameter:1/2". Tool No.:RC-2400. L - Overall Length:38080. Replacement Knives:RCK-151. Replacement bearing #47721. Replacement collar #47739. Replacement knife screws #67115.

Application: To prepare counter-top & bowl edges for topmount or 'drop-in' type sinks & bowls. Among others, used for Corian® sink & bowl #'s 809E, 810, 871E and 872E. Replacement bearing #47738. Replacement collar #47740.

1-1/8" x 1/8" & 1/4" rad. 2-Flute C/T Bull Nose/Cove Edge Router Bit -- 1/2" Shank

Ogee-style door router bit set makes 3/4" thick stile and rail cuts for raised panels. Set was designed for raised panels on cabinet doors, frame and panel furniture and architectural paneling.

Description Amana 55390 45º Lock Miter Bit The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and fed across the cutter. For best results, use in a table-mounted router. Specification D - Cutting...

Cut dadoes and grooves dimensioned perfectly for plywood, flakeboard and other sheet material for which standard size bits are too large.

Cut dados and grooves dimensioned perfectly for plywood, flakeboard and other sheet material for which standard size bits are too large.