135 results for "Amana 47114Flush Trim 3 Flute 1/4" Shank Router Bit" between $10.00 and $75.00

Amana Tool 47302 - 3 Flute Bevel Trim Router Bit Amana Tool 47302 - 3 flute bevel trim router bit is used for bevel trimming laminate with a standard router 3/4" diameter at 7 degrees 1/4" shank Solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut

Description Amana RC-1000 Insert Flush Trim Router Bit, 2 Flute with Ball Bearing Guide In a production environment, insert tooling reduces downtime to a minimum. Each throw-away knife in this flush trimming bit has multiple edges. Rotate the knife to expose a fresh cutting edge. Tips can be replced at any time, even mid-job, without changing the router setup. Specification D - Cutting Diameter:3/4" B - Cutting Length:12mm Tool No.:RC-1000 d - Shank Diameter:1/4" L - Overall Length:2-1/8" Replacement...

Description Amana 45485 Flush Trim Plunge Template Router Bit with Upper Ball Bearing, 2 Flute, 1/4" Shank This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate...

Home > Router Bits > Amana Router Bits > 2 flute Core Box > 1/4" shank x 3/8" radius core box router bit 45918

Amana 54138 Classical Molding Bit with Ball Bearing Guide, 2 Flute A double quarter-round profile is produced by this tool. The depth-of-cut setting determines whether or not a fillet is formed at the top. Switching from the standard pilot bearing to the optional 3/8" bearing introduces a fillet at the bottom of the profile. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-3/8" R - Radius:7/32" Tool No.:54138 B - Cutting Length:11/16" d - Shank Diameter:1/4...

Description Amana 49204 Roman Ogee Bit with Ball Bearing Guide, 2 Flute The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-3/8" R - Radius:1/4" Tool No.:49204 B - Cutting Length:7/8" d - Shank Diameter:1/4" L - Overall Length:2-1/4" Replacement bearing...

Amana 51702 Veining Router Bit, Single Flute, Solid Carbide Rout fine-line designs in laminate-covered and wooden surfaces with this bit, designed specifically for use in a laminate trimmer. It produces a round-bottomed groove. Specification D - Cutting Diameter:3/16" R - Radius:3/32" Tool No.:51702 d - Shank Diameter:1/4" L - Overall Length:1-1/2"

Description Amana 45192 Straight Plunge Router Bit, 1/4" Shank - Single Flute Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Specification D - Cutting Diameter:3/32" B - Cutting Length:1/4" Tool No.:45192 d - Shank Diameter:1/4" L – Length:1-3/4"

Tool Number: 45504. Flute: 2. Shank: 1/4". Diameter: 3/4". Length: 2". For cutting shallow mortises for hinges. For cutting shallow mortises for locksets. (1) Amana 3/4 in. Diameter 2 flute Mortising Bits.

Amana 47150 No-File Router Bit with Ball Bearing Guide, 2 Flute Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. This bit "breaks" the sharp edge as it trims the laminate flush. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. Specification D - Cutting Diameter:1/2" B - Cutting Length:3/8" R - Radius:.059" (1.5mm) Tool No.:47150 d - Shank Diameter:1/4" L - Overall Length:1-7...

Amana Tool 51200 - 1/4" Diameter Flush Trim Router Bit Amana Tool 51200, 1/4" diameter flush trim router bit has a 1/4" shank Single flute An assembly offers the option of switching cutters-from flush trim to either of two bevel trims-without removing the bit from the router or even changing the depth-of-cut setup Four flutes yield a smooth, crisp cut finish All parts can be replaced individually OAL: 1-1/2" Solid carbide

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

Amana 51546 Bullnose Router Bit, 2 Flute Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The "nose diameter" (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table....

Description Amana 55386 Drawer Lock Bit, 2 Flute With this one bit, cut a lock joint that's ideal for quick construction of strong drawer boxes. Use in a table-mounted router only. The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and fronts/backs. The drawer front (or back) is laid flat on the tabletop and fed across the cutter. The side is braced vertically against the fence and fed across the cutter. You can use stock of any...

Amana 57146 Counter-Top 'No-Drip' Design Bit, 2 Flute This bit cuts the inner portion of a 'no-drip' edge on kitchen and vanity countertops, where there's no edge for a guide bearing to reference. Typically used with edge-guide-equipped router. (Use the 5/16" radius corner-rounding bits shown on facing page to do the outer portion.). Specification D - Cutting Diameter:1" A:3/4" Tool No.:57146 B - Cutting Length:1/2" d - Shank Diameter:1/4" L - Overall Length:1-1/2"

A companion to the classical multi-form, this bit expands the range. Simple adjustments to the bit height and the fence position enable you to cut a variety of profiles and details. Use only in a table-mounted router.

For high production work, these single fluted straight bits cut faster and with less heat build-up than double fluted bits. Excellent for man-made materials such as Corian®. End of bit relief allows for fast plunging.