|
Amana Tool 47092 - 1/4" x 1" Flush Trim Router Bit
Amana Tool 47092 - 1/4" x 1" Flush Trim Router Bit Amana Tool 47092 1/4" x 1" flush trim router bit has a 1/4" shank Includes guide bearing 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size 2 flute OAL: 2-1/2" A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes Excellent for template work The bearing follows the template, while the cutting edges trim the workpiece With the router handheld, the template is on the bottom of... 
|
$28.89
etoolsrus.com
|
Top stores
etoolsrus.com
$28.89
|
|
Amana Tool RC-1000 3/4" Insert Flush Trim Router Bit, 1/4" Shank
Description Amana RC-1000 Insert Flush Trim Router Bit, 2 Flute with Ball Bearing Guide In a production environment, insert tooling reduces downtime to a minimum. Each throw-away knife in this flush trimming bit has multiple edges. Rotate the knife to expose a fresh cutting edge. Tips can be replced at any time, even mid-job, without changing the router setup. Specification D - Cutting Diameter:3/4" B - Cutting Length:12mm Tool No.:RC-1000 d - Shank Diameter:1/4" L - Overall Length:2-1/8" Replacement...
|
$75.34
circlesaw.com
|
Top stores
circlesaw.com
$75.34
|
|
Amana Tool 47192 1/2" Overhang Trim Router Bit, 1/4" Shank
Description Amana 47192 Overhang Trim Router Bit with Ball Bearing Guide, 2 Flute Stage flush trimming cuts, whether in laminate work or template work, with this bit. Trimming the material in two passes reduces chipping in laminates and tearout in solid wood. A preliminary cut with the overhang bit leaves a small overhang in laminate work or, template work, an edge slightly proud of the template. Complete the operation with a final pass with a standard trim bit. Specification D - Cutting Diameter...
|
$20.51
circlesaw.com
|
Top stores
circlesaw.com
$20.51
|
|
Amana Tool 51200 - 1/4" Diameter Flush Trim Router Bit
Amana Tool 51200 - 1/4" Diameter Flush Trim Router Bit Amana Tool 51200, 1/4" diameter flush trim router bit has a 1/4" shank Single flute An assembly offers the option of switching cutters-from flush trim to either of two bevel trims-without removing the bit from the router or even changing the depth-of-cut setup Four flutes yield a smooth, crisp cut finish All parts can be replaced individually OAL: 1-1/2" Solid carbide
|
$8.89
etoolsrus.com
|
Top stores
etoolsrus.com
$8.89
|
