24 results for "Amana 46106Carbide Spiral 1/2" Diameter Router Bit" between $10.00 and $150.00

THE NEW IMPROVED Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The “up-cut” shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. The “down-cut” cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide...

Solid carbide compression spiral bits are designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Choose either single flute for the highest possible feed rate or double flute for the best finish. Special unique carbide for longer lifetime in abrasive material.

Build quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits...

46304 Ultra Trim Solid Carbide Upcut Router Bit Features /font> For the ultimate, chip-free finish in laminate, melamine, solid surface and fragile veneers, and for template work of all kinds. The twin ball-bearing pilot enhances the stability of the tool. Dimensions /font> Diameter: 1/2" Cutter length: 2" Shank: 1/2" Overrall length: 4-3/4" Spirals: Up-cut AM45662, 45662 T-Slot 2-Flute Router Bit Features Designed for creating T-slot wall panels (used to cut their characteristic slots...

The "down-cut" cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life. Special unique carbide grade for longer lifetime in abrasive materials. These bits are great for production settings and excellent for creating grooves and dado cuts in softwood, hardwoods, plywood and composite materials. Primarily used on CNC machines and other...

Full color instructions included. Learn step-by-step with Master Craftsman Lonnie Bird. 2-11/16 Diameter, 1-3/16-Inch Cutting Height, 45 Degree Radius, 1/2-Inch Shank. Carbide Tipped, Industrial Quality. For 1/2 - 1-1/8-Inch material. Max RPM = 18,000!.

Amana Tool 45505 - 1-1/4" Diameter Mortising Router Bit Amana Tool 45505 1-1/4" diameter mortising router bit has a 1/2" shank 2-flute OAL: 2-1/8" Use for cutting shallow mortises for hinges and locksets The cutting geometry is calculated to produce an exceptionally clean cut with crisp edges Large gullet between the two flutes allows greater chip clearance and removal Intended for hinge mortising, this bit is also an excellent choice for cutting laps and tenons The sides and bottom of the cut are...

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/4". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

* Thickness: 35/64". * Radius: 17/64". * Carbide height: 1". * Diameter: 1-1/32". * Shank: 1/2". * Length: 2-1/2". * Shape the full edge of a workpiece with a bullnose radius bit. * Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. * The “nose diameter” is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. * Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter...

New generation of high wear outstanding carbide. New superior geometric design. New advanced automatic grinding technology that improves the carbides' resistance to wear. Super clean cuts. 200% longer life time even when working with abrasive materials. Cost effective. (1) Amana Tool 45420-LH Straight Plunge Router Bit Bit.

Used for carving, decorative doors and sign manufacturing. It leaves an excellent finish and expels chips quickly.

Used for carving, decorative doors and sign manufacturing. It leaves an excellent finish and expels chips quickly.