246 results for "Amana 45806Dovetail 1/2" Diameter 1/2" Shank Router Bit" between $10.00 and $150.00

* Cutting Diameter: 1/2". * Cutting Height: 1-1/2". * Shank Diameter: 1/2". * Length: 3-1/8". * 600-grit finish micrograin carbide tips. * High precision CNC machined tool body and tip profile. * Radial relief grind. * New advanced automatic grinding technology that improves the carbides' resistance to wear. * Super clean cuts. * 200% longer life time even when working with abrasive materials. * Cost effective.

Build quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits...

* Pattern Type: Ogee. * Diameter: 1-5/8". * Radius: 1/4". * Carbide Height: 1-1/16". * Shank: 1/2". * Length: 3-5/16". * These types of sets utilizes two different cutters that are 'coped' to each other. * Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set. * With trim cutters #55448 & #55450 - use on 7/8" through 1" stock use. * For 5/8" through 7/8" stock, substitute trim cutters with spacers.

Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The "nose diameter" (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router table.

* # Wings: 3. * Diameter: 1-7/8". * Kerf: 1/8". * Shank: 1/4". * Length: 2-3/8". * Groove edges for T-moldings, splines or biscuits, and other purposes. * Rout tongue and groove joinery. * Slotting cutters are available with either 2 wing or 3 wing cutters. * Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. * Use with all handheld and table mounted routers.

Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.

Description Amana 51566 Bullnose Router Bit, 2 Flute Shape the full edge of a workpiece with a bullnose radius bit. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. The "nose diameter" (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Must be used with an edge guide on handheld routers or the fence on a router...

Amana 45932 Elongated Core Box Router Bit, 2 Flute, Extra Deep Cut much deeper flutes than with a regular core box bit. Specification D - Cutting Diameter:1/2" R - Radius:1/4" Tool No.:45932 B - Cutting Length:1-1/4" d - Shank Diameter:1/2" L - Overall Length:2-3/4"

D - Cutting Diameter:1-1/4". A:3/8". B - Cutting Length:1/2". Tool No.:49302. d - Shank Diameter:1/2". L - Overall Length:2-3/8". A:Replacement Bearings. Standard 3/8":47706. OR 7/16":47702. OR 5/16":47718. OR 1/4":47720.

Amana 49402 45º Chamfer Router Bit, 2 Flute with Ball Bearing Guide Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results, use in a router table!. Specification a° - Angle:45° D - Cutting Diameter:1-1/4" B - Cutting Length:1/2" Tool No.:49402 C - Cutting Length:5/8" d - Shank Diameter:1/2" L - Overall Length:2-3/8" Replacement Bearing #:47704

Description Amana 49521 Corner Rounding Bit with Ball Bearing Guide, 2 Flute The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Specification D - Cutting Diameter:2-...

D - Cutting Diameter:3/4". D1 - Cutting Diameter:25/64". R - Radius:3/32". R1 - Radius:3/16". Tool No.:53806. B - Cutting Length:3/4". B1 - Cutting Length:9/16". d - Shank Diameter:1/2". L - Overall Length:2-5/16".

Amana 54182 Wavy Edge Bit with Ball Bearing Guide, 2 Flute This bit produces an undulating curve with two convex forms flanking a concave form. All the radii are equal. A shoulder on the cutter can form a fillet, depending upon the depth-of-cut setting. Use in either handheld or table-mounted routers. Specification D - Cutting Diameter:1-1/4" R - Radius:5/32" Tool No.:54182 B - Cutting Length:11/16" d - Shank Diameter:1/2" L - Overall Length:2-5/8" Replacement bearing #:47706

Amana 54217 Triple Fluting Bit with Ball Bearing Guide, 2 Flute Three uniform beads are formed in one pass with this bit. Produce reeded pilasters or table legs referencing opposite faces of the workpiece. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" Type:Flute R - Radius:1/8" Tool No.:54217 B - Cutting Length:1" d - Shank Diameter:1/2" L - Overall Length:3" Replacement bearing #:47716

Description Amana 45704 90º V-Groove Router Bit, 1/4" Shank, 2 Flute Cut decorative 'V' grooves and lettering on signs with this v-groove bit. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers. SpecificationD - Cutting Diameter:1/2"a° - Angle:90°B - Cutting Length:1/2"Tool No.:45704B1 - Cutting Length:1/4"d - Shank Diameter:1/4"L - Overall Length:1-5/8"

Description Amana 45946 Elongated Core Box Router Bit, 2 Flute, Extra Deep Cut much deeper flutes than with a regular core box bit. SpecificationD - Cutting Diameter:1-1/2"R – Radius:3/4"Tool No.:45946B - Cutting Length:1-1/4"d - Shank Diameter:1/2"L - Overall Length:2-3/4”"

Cut half-round grooves for fluted moldings, columns, millwork, and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers. Width of Cutting Area: 1/2". Cutting Dimensions: 3/8". Shank Size: 1/4". Length: 1-1/2". Packing & Sold In: Each.