|
Amana 49350 Multi Rabbeting Router Bit 1-3/8 Diameter, 1/2 Shank
|
$37.49
savannahtoolhouse.com
|
Top stores
savannahtoolhouse.com
$37.49
|
|
Amana Ogee Bit, 2-flute,1 3/8" Diameter, 1/2" Shank, w/Bearing
The ogee is one the basic shapes used in moldings and decorative profiles. An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted). The ogee bit is characterized by the concave shape coming off the pilot bearing. Using the optional 3/8" bearing produces a profile with a fillet at the convex end of the curve. Use in a handheld or table-mounted router.
|
$63.25
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$63.25
|
|
Amana Flush Trim NO-FILE Bit , 2-flute, 1/4" Shank, 1/2" Diameter, 3/8" Cutting Length, w/Bearing
Amana Flush Trim NO-FILE Bit , 2-flute, 1/4" Shank, 1/2" Diameter, 3/8" Cutting Length, w/Bearing
|
$26.95
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$26.95
|
|
Amana Straight Stagger Tooth Plunge Bit, 1/2" Shank, Various Diameters & Cutting Lengths
Two cutting edges spaced 180 degrees apart, each half the length of its flute. One extends from the tip to the middle of the flute, the other from the middle to end. The configuration combines the cutting speed and chip clearance of a single-flute bit with the finish of a double-flute bit. Excellent bit for cutting dense or abrasive man-made materials and panel goods.
|
$21.50
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$21.50
|
|
Amana 45964 Ball End Bit
Amana 45964 bit 3/8" radius, 3/4" diameter, 11/16" carbide height, 1/2" shank. Profile is useful as a 'conduit' for cables, pipes. Super clean cuts and as well as Cost effective.
|
$31.99
toolmarts.com
|
Top stores
toolmarts.com
$31.99
|
|
Amana 49554 Handrail/Table Edge Bit
Amana Special router bits are used for cutting table top edges or used with handrail side profile bits. 2-3/4" diameter, 1-3/4" radius, 1/2" shank. Super clean cuts as well as Cost effective.
|
$86.99
toolmarts.com
|
Top stores
toolmarts.com
$86.99
|
|
Amana Tools 45802 9° 3/8" Dovetail Router Bit, 1/2" Shank
Description Amana 45802 9º Dovetail Bit The 9º dovetail bit is used for certain operations with the Incra dovetail system. SpecificationD - Cutting Diameter:3/8"B - Cutting Length:3/8"Tool No.:45802d - Shank Diameter:1/2"L - Overall Length:2"Application:-
|
$18.41
circlesaw.com
|
Top stores
circlesaw.com
$18.41
|
|
Amana Tool 49302 1-1/4" Rabbet Router Bit, 1/2" Shank
D - Cutting Diameter:1-1/4". A:3/8". B - Cutting Length:1/2". Tool No.:49302. d - Shank Diameter:1/2". L - Overall Length:2-3/8". A:Replacement Bearings. Standard 3/8":47706. OR 7/16":47702. OR 5/16":47718. OR 1/4":47720.
|
$30.15
circlesaw.com
|
Top stores
circlesaw.com
$30.15
|
