|
Amana Panel Pilot Bit, Single flute, 1/4" Shank, 1/4" Diameter, 3/4" Cutting Length
Carbide tipped with 2 pilots and plunge bit with two pilots and hardened boring point for thicker material, fast cutting. This enables the cutter to be guided by jigs or the inner frame from the top, middle or bottom of the cutter. A very useful cutter for motorhome body building, caravans and boat building. 
|
$12.25
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$12.25
|
|
Amana Core Box Bit w/Ball Bearing Pilot, 2-flute, 1/4" Shank, 1/2" Diameter
The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece. With a handheld router, the template must be on top of the workpiece. With a table-mounted router, the template must be on bottom of the workpiece.
|
$35.25
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$35.25
|
|
Amana Tool 51200 Flush Cutting Panel Pilot Router Bit
Amana 51200 Flush Cut Single Flute Panel Pilot Router Bit, Solid Carbide Here's the ideal laminate trimming bit for high-volume production. Solid carbide and integral pilot (no bearing to maintain) extend life of bit, slim configuration reduces vibration. Suitable for routers and trimmers. Specification D - Cutting Diameter:1/4" B - Cutting Length:1/4" Tool No.:51200 d - Shank Diameter:1/4" L - Overall Length:1-1/2" Type of Cut:Flush
|
$13.00
circlesaw.com
|
Top stores
circlesaw.com
$13.00
|
|
Amana Down Shear Flush Trim Bit , 2-flute, 1/4" Shank, 1/2" Diameter,1" Cutting Length, w/Bearing
The Dynabit™ line features a modest down-shear for an excellent finish. The helix bits have a spiral-like twist to the cutting edges, making them especially good on difficult materials such as melamine. An adhesive-trapping gap between cutting edges & pilot bearing is featured on tools #47111 & #47113.
|
$18.50
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$18.50
|
|
Amana SC611 1/4" STRAIGHT CUTTER 2-7/8"DIAMETER
|
$40.81
acetoolonline.com
|
Top stores
acetoolonline.com
$40.81
|
|
1/2" Overhead Pilot Flush Trim Bit - 1/4" Shank
Overhead pilot flush trim bits are ideal for template-guided shaping, pattern duplication, edge truing, etc. Maximum depth of cut is greater than the bits' cutting length; when part of the workpiece is trimmed, remove the template and use the work itself as a guide.
|
$24.99
Highland Woodworking
|
Top stores
Highland Woodworking
$24.99
|
|
Amana 45192 Straight Plunge Router Bit 3/32 Diameter 1/4" Shank
|
$16.40
savannahtoolhouse.com
|
Top stores
savannahtoolhouse.com
$16.40
|
|
Amana 45462-S 5/8 in. Diameter 1/4 in. Shank 2 Flute Straight Plunge Bit
Tool Number: 45462-S. Flutes: 2. Shank: 1/4". Length: 1-3/4". Diameter: 5/8". Replacement Bearing: 47712. Replacement Collar: 47724. Dado Clean-Out. Hardwood Medallions. Flooring Medallions. (1) Amana Dado Clean-Out Bit.
|
$27.45
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$27.45
|
|
Amana - AMA51204 - 1/4" Single Flute Panel Pilot
Ideal laminate trimming bit for high-volume production. Soild carbide and integral pilot (no bearing to maintain) extend life of bit, slim configuration reduces vibration. Suitable for routers and trimmers.
|
$10.01
woodworkerswholesale.com
|
Top stores
woodworkerswholesale.com
$10.01
|
|
Amana 45464-S 3/4 in. Diameter 1/4 in. Shank 2 Flute Straight Plunge Bit
Tool Number: 45464-S. Flutes: 2. Shank: 1/4". Length: 1-3/4". Diameter: 3/4". Replacement Bearing: Amana 47714. Replacement Collar: Amana 47724. Dado Clean-Out. Hardwood Medallions. Flooring Medallions. (1) Amana Dado Clean-Out Bit.
|
$29.25
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$29.25
|
|
Amana 45500 1/2 in. Diameter 2 flute 1/4 in. Shank Mortising Bits
Tool Number: 45500. Shank: 1/4". Diameter: 1/2". Length: 2". For cutting shallow mortises for hinges. For cutting shallow mortises for locksets. (1) Amana 1/2 in. Diameter 2 flute Mortising Bits.
|
$13.88
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$13.88
|
|
Amana SC672 1/4" STRAIGHT CUTTER 1-7/8" DIAMETER
|
$38.01
acetoolonline.com
|
Top stores
acetoolonline.com
$38.01
|
|
Amana 45475-S 3/8 in. Diameter 1/4 in. Shank 2 Flute Straight Plunge Bit
Tool Number: 45464-S. Flutes: 2. Shank: 1/4". Length: 1-3/4". Diameter: 3/8". Replacement Bearing: Amana 47701. Replacement Collar: Amana 47724. Dado Clean-Out. Hardwood Medallions. Flooring Medallions. (1) Amana Dado Clean-Out Bit.
|
$18.90
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$18.90
|
|
Amana 45489-S 1/2 in. Diameter 1/4 in. Shank 2 Flute Straight Plunge Bit
Tool Number: 45489-S. Flutes: 2. Shank: 1/4". Length: 1-3/4". Diameter: 1/2". Replacement Bearing: Amana 47701. Replacement Collar: Amana 47724. Dado Clean-Out. Hardwood Medallions. Flooring Medallions. (1) Amana Dado Clean-Out Bit.
|
$18.90
dynamitetoolco.com
|
Top stores
dynamitetoolco.com
$18.90
|
