|
Amana 45464 3/4"D Flush Trim Template / Pattern Plunge Router Bits
This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. 
|
$27.45
woodworkersemporium.com
|
Top stores
woodworkersemporium.com
$27.45
|
|
Flush Trim Plunge Template Router Bits w/ Upper Ball Bearing
Amana Tool 45551 Carbide Tipped Flush Trim Plunge Template 1-1/8 Dia x 2 Inch Cut Height x 1/2 Shank w/ Upper Ball Bearing Router Bit
|
$71.03
|
Top stores
Toolstoday.com
$71.03
|
|
Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
1/2-inch cutting diameter 3/8-inch cutting height 2-1/4-inch length 1/4-inch shank, 2 flute Carbide tipped, industrial quality, Weight: 0.13 pounds, Manufacturer: Amana Tool
|
$26.85
|
Top stores
Amazon.com
$26.85
|
|
Amana Tool 47101 3/8" Flush Trim Router Bit w/Ball Bearing Guide Double Flute
Amana 47101 Flush Trim Router Bit with Ball Bearing Guide, 2 Flute Use a flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. Specification...
|
$26.75
circlesaw.com
|
Top stores
circlesaw.com
$26.75
|
|
Amana Tool 45460 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank
Cutting diameter 1/2-Inch 1-Inch cutting height 1/4-Inch shank, 2-flute Carbide tipped, industrial quality, Weight: 0.15 pounds, Manufacturer: Amana Tool
|
$24.05
|
Top stores
Amazon.com
$24.05
|
|
Bowl & Sink Trim Router Bits w/ Ultra-Glide™ Ball Bearing Guide Flush Trim
Trim a sink cutout flush with the bowl in stages using these “over-hang” and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide™ bearings that are tapered to match the slope of the bowl’s side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation. Carbide-Tipped.
|
$37.46
|
Top stores
Toolstoday.com
$37.46
|
|
Flush Trim with Miniature Ball Bearing Guide
No Brass Pilot = No Burn! Unlike traditional miniature router bits using brass-pilots, Amana Tool® uses tiny 3/16” diameter ball bearing guides, eliminating burn marks (burnout) caused by brass pilot bits. Innovative carbide tipped design delivers a consistent edge that eliminates hand sanding & filing. Ideal for delicate projects such as: Sign-makingRouting letter edgesBuilding musical instruments Flush trimming tight cornersHigh production projects The miniature bearing router bits can be...
|
$20.06
|
Top stores
Toolstoday.com
$20.06
|
|
Amana Tool 51590 Hand Grip Plunge Router Bit without Ball Bearing Guide
D - Cutting Diameter:1-1/8". aº - Bevel Angle:45º. R - Radius:1/2". B - Cutting Length:1-9/16". Tool No.:51590. B1 - Cutting Length:7/8". B2 - Cutting Length:1-1/4". d - Shank Diameter:1/2". L - Overall Length:3-5/8".
|
$79.05
circlesaw.com
|
Top stores
circlesaw.com
$79.05
|
|
Amana Tool 47105 1/2" Dynabit Laminate Trim Bit w/Ball Bearing Guide
Description Amana 47105 Dynabit Laminate Flush Trim Router Bit with Ball Bearing Guide, 2 Flute The Dynabit line features a modest down-shear for an excellent finish. Specification D - Cutting Diameter:1/2" B - Cutting Length:1" d - Shank Diameter:1/4" L - Overall Length:2-5/8" Tool No.:47105 Type:Down-Shear Replacement Bearing:47706
|
$17.78
circlesaw.com
|
Top stores
circlesaw.com
$17.78
|
|
Amana Tool 47180 5/8" Dynabit Laminate Trim Bit w/Ball Bearing Guide
Description Amana 47180 Dynabit Laminate Flush Trim Router Bit with Ball Bearing Guide, 2 Flute The Dynabit line features a modest down-shear for an excellent finish. The spiral-like twist to the cutting edges makes this bit especially good on difficult materials such as melamine. Specification D - Cutting Diameter:5/8" B - Cutting Length:5/8" d - Shank Diameter:1/4" L - Overall Length:2" Tool No.:47180 Type:Flush Helix Replacement Bearing:47712
|
$22.39
circlesaw.com
|
Top stores
circlesaw.com
$22.39
|
|
Bevel Trim Router Bits- without Ball Beaing Guide
Cut, trim and bevel laminates with one bit! Change depth-of-cut setting to shift from flush to bevel trimming. Must be used with an edge or bearing guide or fence. Designed specifically for use in laminate trimmers.
|
$15.38
|
Top stores
Toolstoday.com
$15.38
|
