|
Amana Flush Trim Bit, Top Bearing, 2-flute, 1/4" Shank, Various Diameters & Cutting Lengths
This bit is essentially a plunge-cutting straight bit with a shank-mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router... 
|
$25.95
cbtoolgroup.com
|
Top stores
cbtoolgroup.com
$25.95
|
|
Flush Trim Plunge Template Router Bits w/ Upper Ball Bearing
Amana Tool 45475 Carbide Tipped Flush Trim Plunge Template 3/8 Dia x 1/2 Cut Height x 1/4 Inch Shank w/ 2 Upper Ball Bearings Router Bit
|
$20.40
|
Top stores
Toolstoday.com
$20.40
|
|
Amana Tool 45460 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank
Cutting diameter 1/2-Inch 1-Inch cutting height 1/4-Inch shank, 2-flute Carbide tipped, industrial quality, Weight: 0.15 pounds, Manufacturer: Amana Tool
|
$24.05
|
Top stores
Amazon.com
$24.05
|
|
Amana Tool 45460 - 1/2x1 Pattern Cut Router Bit
45460 Flush Trim 2-Flute Pattern Plunge Router Bit Features This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. It is a versatile bit, useful for template/pattern routing of parts, joints, and internal cuts, and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router...
|
$25.89
etoolsrus.com
|
Top stores
etoolsrus.com
$25.89
|
|
Amana Tool 47100 3/8" Flush Trim Router Bit Ball Bearing Guide Double
Description Amana 47100 Flush Trim Router Bit with Ball Bearing Guide, 2 Flute Use a flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work...
|
$16.16
circlesaw.com
|
Top stores
circlesaw.com
$16.16
|
|
Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
1/2-inch cutting diameter 3/8-inch cutting height 2-1/4-inch length 1/4-inch shank, 2 flute Carbide tipped, industrial quality, Weight: 0.13 pounds, Manufacturer: Amana Tool
|
$26.85
|
Top stores
Amazon.com
$26.85
|
|
Flush Trim with Miniature Ball Bearing Guide
No Brass Pilot = No Burn! Unlike traditional miniature router bits using brass-pilots, Amana Tool® uses tiny 3/16” diameter ball bearing guides, eliminating burn marks (burnout) caused by brass pilot bits. Innovative carbide tipped design delivers a consistent edge that eliminates hand sanding & filing. Ideal for delicate projects such as: Sign-makingRouting letter edgesBuilding musical instruments Flush trimming tight cornersHigh production projects The miniature bearing router bits can be...
|
$20.06
|
Top stores
Toolstoday.com
$20.06
|
|
Amana Tool 51590 Hand Grip Plunge Router Bit without Ball Bearing Guide
D - Cutting Diameter:1-1/8". aº - Bevel Angle:45º. R - Radius:1/2". B - Cutting Length:1-9/16". Tool No.:51590. B1 - Cutting Length:7/8". B2 - Cutting Length:1-1/4". d - Shank Diameter:1/2". L - Overall Length:3-5/8".
|
$79.05
circlesaw.com
|
Top stores
circlesaw.com
$79.05
|
|
Amana Tool 47105 1/2" Dynabit Laminate Trim Bit w/Ball Bearing Guide
Description Amana 47105 Dynabit Laminate Flush Trim Router Bit with Ball Bearing Guide, 2 Flute The Dynabit line features a modest down-shear for an excellent finish. Specification D - Cutting Diameter:1/2" B - Cutting Length:1" d - Shank Diameter:1/4" L - Overall Length:2-5/8" Tool No.:47105 Type:Down-Shear Replacement Bearing:47706
|
$17.78
circlesaw.com
|
Top stores
circlesaw.com
$17.78
|
|
Amana Tool 47180 5/8" Dynabit Laminate Trim Bit w/Ball Bearing Guide
Description Amana 47180 Dynabit Laminate Flush Trim Router Bit with Ball Bearing Guide, 2 Flute The Dynabit line features a modest down-shear for an excellent finish. The spiral-like twist to the cutting edges makes this bit especially good on difficult materials such as melamine. Specification D - Cutting Diameter:5/8" B - Cutting Length:5/8" d - Shank Diameter:1/4" L - Overall Length:2" Tool No.:47180 Type:Flush Helix Replacement Bearing:47712
|
$22.39
circlesaw.com
|
Top stores
circlesaw.com
$22.39
|
|
Amana RC-2400 Insert Carbide Flush Trim Template Router Bit with Upper Ball Bearing, 2 Flute
D - Cutting Diameter:3/4". B - Cutting Length:50mm. d - Shank Diameter:1/2". Tool No.:RC-2400. L - Overall Length:38080. Replacement Knives:RCK-151. Replacement bearing #47721. Replacement collar #47739. Replacement knife screws #67115.
|
$105.84
circlesaw.com
|
Top stores
circlesaw.com
$105.84
|
