17 results for "Amana 45234Plunge 7/8" Diameter 1/4" Shank" between $10.00 and $150.00

Amana 54217 Triple Fluting Bit with Ball Bearing Guide, 2 Flute Three uniform beads are formed in one pass with this bit. Produce reeded pilasters or table legs referencing opposite faces of the workpiece. Use in a handheld or table-mounted router. Specification D - Cutting Diameter:7/8" Type:Flute R - Radius:1/8" Tool No.:54215 B - Cutting Length:1" d - Shank Diameter:1/4" L - Overall Length:2-5/8" Replacement bearing #:47716

Amana Tool 54160 - 1/8" Radius Corner Bead Router Bit Amana Tool 54160 1/8" radius, corner bead router it has a 1/4" shank 7/8" diameter 2 flute with ball bearing guide Produce three slightly different profiles using this bit-an edge bead with or without a fillet and a full corner bead-by altering the bit extension or rolling the workpiece between passes This group of hard-to-find tools is particularly suitable for antique reproductions and restoration projects Use in a handheld or table-mounted...

Amana router bits are built of carbon steel alloys that are impregnated with vanadium particles. The vanadium both increases a router bit's internal structural strength while also preventing corrosion, allowing the router bit to withstand extreme stress under heavy load over time without cracking or breaking. Amana Router Bits are laser etched with the Amana brand and the bit's vital specifications so you'll have the RPM range and clamping depth you need to know.

1/4" Shank. 2 Flute With Ball Bearing Guide. Carbide Tipped. Super clean cuts. 200% longer life. R: 1/4" D: 1-3/8" B: 7/8" d: 1/4" L: 2-1/4".

Amana Tool 49500 R: 3/16" D: 7/8" B: 1/2" d: 1/4" L: 2" 600-grit finish micrograin carbide tips. Chip-limiter (anti-kickback) geometry. High precision CNC machined tool body and tip profile. 1/4" Shank. 2 Flute.

1-1/4" cutting length. 600-grit finish micrograin carbide tips. D: 7/8" B: 1/4" d: 1/2" L: 2-7/8". radial relief grind. 1/2" Shank.

CMT From a gently beveled edge to decorative chamfers in a variety of materials - CMT offers smooth results. The long cutting length allows maximum versatility in bevel dimensions. Also see the Series 857 Chamfer Bits for multi-sided containers and the Chamfer Set. This CMT Chamfer Bit has a 25º cutting angle. The cutting diameter is 7/8" (22.2 mm) and the cutting length is 1/2". It comes with ball bearing guides and has a 1/4" shank. A=25° D=7/8" I=13/32" S=1/4"

Order #:Description. 55352:Ogee profile cutter. 55434:Ogee cope cutter. 55354:.250" groove cutter. 55448:.300" trim cutter (.865" dia.). 55450:.433" trim cutter (.865" dia.). 55452:.400" rabbet cutter (1.615" dia.). 47708:.865" ball bearings (2 required). 47622:1/2" shank arbors with nuts (2 required). 55356:.002" shims (4 required). 55402:.040" shims (4 required). 55357:.004" shims (4 required). 55367:3.6mm spacers (4 required).