125 results for "Alfa lighting 99199-STN Support Arm ReRouters Track Accessory" between $10.00 and $600.00

Wall Extension Arm End Wall Support for use with Flex-Line Track Light SystemsThe Flex-line Wall Extension Arm end wall support for Flex-Line track. Two separate rods give the support rigid stability for use at the end of a wall mounted run. The spring clamps allow simple installation of the track without tools. The Flex-line Wall Extension Arm supports should be place approximately every 3ft. Sections with a tight radius or sharp curves may require more.Features:20" LengthAbout Bruck Lighting Systems...

The Enzis Wall Support is used to mount Enzis track 3" from the wall. Standard wood screw provided for ceiling mount. No tools are required to attach the support to the track. Bruck recommends Enzis Wall Supports to be placed approximately every three feet.

12" Wall Extension Arm Support Clip for use with V/A Track SystemsThe V/A Wall Extension Arm Clip is a support with clip and plate discs for V/A track. Support rods cannot be shorted. The V/A Wall Extension Arm Clip, recommended spacing every 3 feet or closer when used with heavy glass pendants.About Bruck Lighting Systems:Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different...

Besa Lighting 8 Foot 150 Watt Track Kit from the Support Hardware CollectionAll mounting hardware includedNot suitable for sloped ceiling useIncludes the Following: 1 - eight foot rail section1 - 150 watt surface-mount transformer (electronic 120V)3 - Rigid Standoffs2 - rail end capsUL Listed: suitable for No Locations

20" Wall Extension Arm Support Clip for use with V/A Track SystemsThe V/A Wall Extension Arm Clip is a support with clip and plate discs for V/A track. Support rods cannot be shorted. The V/A Wall Extension Arm Clip, recommended spacing every 3 feet or closer when used with heavy glass pendants.About Bruck Lighting Systems:Since its beginnings, Bruck Lighting Systems has operated under the principles of providing energy efficient lighting without compromising superior quality. With seven different...

Includes full-size feed/support canopy, steel cable, 10 gauge stranded tandem wire, outlet box strap and Trac mounting hardware.

Includes NC Power Back gauge with ballscrew and single axis NC control. Well balanced and sturdy welded frame provides cobstant stability and rigidity. Centralized hydraulic logical system. Independent hydraulic pressure hold-downs synchronized with upper blade, ensuring workpiece is clamped at moment of cut. High grade carbon/chrome alloy steel blade, 60 HRC. Hydraulic adjustable rake angle design. Adjustable cutting length and stroke. Shadow line lighting covering full length of work table...

The V/A Kit 78 utilizes Bruck's versatile V/A track system. Uses two 39" tracks joined together to form a straight 78" connection. The power feed canopy is designed to give users the flexibility to center it on the track, or at an offset with supports.This kit is designed to get you started with all the components needed for the rail system. Then it can be customized with Bruck Uni-Light fixtures or pendants and connectors, sold separately. Kit Contents:V/A 300W surface mount electronic transformer...

These versatile standoffs allow you to choose your hanging method and height. Unique telescoping height adjustment and rotational head insert simplify and perfect your installation. Self-drilling drywall anchor included with all hangers. Rotating head insert allows fine tuning of rail axis position and fixture orientation. Wall bracket option features cable support for wall mounting. Ball-joint option is useful for a sloped ceiling mount. These connectors work for single-circuit monorails only...

9451371 - Trenton Track Lighting by Sea Gull. Number of Bulbs: 3 Bulb Type: G-9 Halogen Bulb(s) Included: Yes Max. Wattage Per Bulb: 40 Total Fixture Wattage: 120 Glass Type: Dusted Ivory Shade Included: Yes Suitable Installation: Dry Voltage: 120V Includes: One Rail, Two End Caps, One Power Feed, One Support Adapter, Three Directional Lights, Three Bulb Glass Covers

Includes full-size feed/support canopy, steel cable, 10 gauge stranded tandem wire, outlet box strap and Trac mounting hardware.

Home > Juno Lighting > Juno Track Lighting > Juno Trac 12 Low Voltage Miniature Track Lighting System > Juno Trac 12/25 Low Voltage 25 Amp Track Lighting System Components > Juno Track Lighting TLR95-144-SL Trac 12/25 Stainless Steel 144" Cable Mechanical Support Kit, Silver Color

The Interfit 5-in-1 Reflector with Arm and Stand Kit is the ideal way to hold reflectors in place for a variety of lighting applications. This kit includes a multi-position arm with a versatile swivel joint, which allows positioning at almost any angle. The standard universal base allows a secure connection to the supplied Interfit Lighting Stand.

The High-Line Tightening Set is a wall fastener for the copper High-Line cable. Installed properly into a firm wall base, the tightening set pulls the copper cable when the center is turned. Elements are attached to the wall with two mounting screws. The tightening set may also be used in conjunction with mounting supports to create ceiling mount applications.

Home > Juno Lighting > Juno Track Lighting > Juno Trac 12 Low Voltage Miniature Track Lighting System > Juno Trac 12/25 Low Voltage 25 Amp Track Lighting System Components > Juno Track Lighting TLR96-144-WH Trac 12/25 Stainless Steel 144" Cable Mechanical Support Kit, White Color

FIT System support options include close to ceiling, stem, and aircraft cable options that are compatible with both vertically and horizontally orientated track layouts. Track may be supported from either ceiling or wall surfaces. Support points are required along the FIT system track run at 4' maximum intervals. Attachment hardware for horizontal suspension or vertical flush mount. 2 circuit/2 neutral. Listing Made in the USA