31 results for "Air/Hydraulic Foot Pump" between $150.00 and $1,500.00

For industrial and construction jobs that require single-acting rams up to 55 ton capacity. The added convenience of an air motor reduces pumping time and effort.

OTC 4020 Air/Hydraulic Foot Pump These pumps require 9cfm at 100PSI air pressure at the pump. Develops 10000PSI at 100PSI air pressure. 3/8" NPTF oil port. 98cu" usable oil capacity in plastic reservoir With shop air as the energy source, this pump has the power and oil capacity (80cu" usable oil) to drive even the large 55-ton rams. It is an ideal all-around power source for dozens of body, frame, and alignment applications. It can be used with a variety of rams, presses, and hydraulic pullers operating...

American Presto - Wisdom 50-BS10-P NOTE: COLOR AND PICTURE SHOWN MAY VARY Converts 4 and 10 ton body/frame rams to air/hydraulic operation and eliminate hand pumping. Operate at 40 to 120 PSI to provide instant controlled action and keep its pressure until released. Fit all standard and long ram hydraulic equipment. Develop up to 10,000 PSI Has a hydraulic overload valve. Oil port: 3/8" NPT

Up to 10,000 pounds per square inch with standard shop air supply of 110 - 175 pounds per square inch Made of durable, lightweight, corrosion-free aluminum Output flow rate (no load) of 61 cubic inch per minute Output flow rate (load) of 11.0 cubic inch per minute Built-in overload circuit protects equipment.

Fluid Type: PE150-HP or Equivalent Hydraulic Fluid Required Pressure: 60 to 120 PSI Fill to ½" below Fill Opening

100% Made in USA. EZ-E-ON attachments for quick setups. For push-pull spread operations. Remote control jacks. Air/hydraulic Jack Assembly.

100% Made in USA. EZ-E-ON attachments for quick setups. For push-pull spread operations. Remote control jacks. Air/hydraulic Jack Assembly.

* Efficiently and effortlessly operate any single acting rams up to 55 ton capacity. * Provides up to 10,000 PSI with standard shop air supply of 90 to 175 PSI. * Made of durable, lightweight, corrosion-resistant aluminum. * Built-in pressure by-pass system protects overload operation. * User friendly foot-actuated design for easy control of moving fluid. Uses 3/8" NPT fluid coupler. * 91.5 cu. in. capacity.

Use with single-acting rams up to 50 Ton capacity (80 cu. in. reservoir oil capacity). Extend/hold/retract foot lever control. Heavy duty construction—solid aluminum reservoir. Easily adapts to larger reservoirs (Consult Factory). Adjustable release detent to facilitate ram return. Operates on shop air (40 -125 PSI). Two-stage release mechanism — reduces shock on system while allowing fast or metered ram return. No need for metal reservoir conversion — no plastic parts. Simplicity of design...

The power unit of choice for major manufacturers of auto body, frame straighteners and other equipment. Operate at 40-100 psi shop air pressure at the pump. Internal relief valve protects circuit components, air inlet filter protects motor. Serviceable pump motor is not a "throw away", providing economical repair. Permanently vented reservoir cap. dBA 85 at 10,000 psi.

Also known as: ATD-5812, ATD5812; User-friendly foot-actuated design for easy control of moving fluid at tremendous rate Uses 3/8" NPT(f) fluid coupler Built-in pressure bypass system protects overload operation Efficiently operates single-acting ram applications in many industrial and construction settings Provides up to 10,000 psi with standard shop air supply of 110 - 175 psi Made of durable, lightweight, corrosion-free aluminum Usable Oil Capacity: 91.5 cu. in. Pressure Rating: 10,000 psi Air...

Multiple boom and leg extensions provide maximum stability. Boom swivels 10 degrees right or left if base cannot be centered under the load. Floor lock secures crane from moving when in use. Model 78600A includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure. Model 78605 includes an electro/hydraulic pump requiring 115 VAC.

* Air/hydraulic foot pump (Model. * Pair of bed plates included. * Self-retracting ram can slide for horizontal movement on head channel. * Zero distortion, heavy duty structural steel frame. * Liquid filled gauge measures ram force and internal working pressure. * Optional equipment (Model 78025 Accessory Kit) can be used on this press.

Air/hydraulic foot pump provides hands free operation and easy convenient lifting. Metered pump valve provides safe lowering speed. Fully adjustable universal saddle with hand adjustable corner brackets and safety chain. Safety overload system prevents jack from being used beyond its rated capacity. Two stage flash chromed rams inhibit rust from entering the hydraulic system. Wwide base with four easy rolling 4" diameter swivel ball bearing caster wheels (one is a locking caster wheel) provides...