48 results for "Air Spray Gun for Fluid Film" between $2.00 and $400.00

This undercoating spray gun is designed to use with Fluid Film (order # 736298) for undercoating trucks and automobiles. The gun, which requires an air compressor, will apply Fluid Film rapidly and evenly to your vehicle's under carriage, or to any large area that requires protection. The spray gun comes complete with nozzle and a 32 ounce resevoir for the Fluid Film.

* Specialized black bristle brushes for cleaning spray guns, air caps, air passages & fluid nozzles

Fluid Spray Nozzles for G100 and G200 Spray Guns including these size spray tips: FN1 1/32"" (0.8mm) Use for Parting Films FN2 1/16"" (1.6mm) Use for Parting Films FN3 3/32"" (2.4mm) Use for Paints FN4 1/8"" (3.1mm) Use for Resins FN5 5/32"" (3.9mm) Use for Gelcoats FN6 3/16"" (4.7mm) Use for Gelcoats FN7 7/32"" (5.5mm) Use for Gelcoats with Flakes FN8 1/4"" (6.2mm) Use for Gelcoats with Flakes FN9 9/32"" (7.1mm) Use for Sandblasting Product Details Manufacturer: ES Manufacturing ...

World famous JGA fit, feel, and balance. Superior atomization - Newest 9000 air cap designed for today’s refinishing materials. Provides uniform film build for maximum control of brightness with metallics. Stainless steel fluid tip and needle. Maximum durability - drop-forged aluminum gun body. Replaceable threaded baffle for economical servicing. Cartridge type air valve for positive sealing and quick action. Includes: TGC one-quart suction feed cup.

25% larger spray pattern for fast coverage. Even distribution of metallics for no mottling or striping. Excellent color matching capabilities. Optimum atomization for clearcoats and single stages. Produces a high gloss finish and minimizes orange peel. Excellent fluid control for applying more film build with fewer passes. Lightweight and comfortable: classic JGA fit and feel, yet lighter weight. Gun body styling changes for improved comfort. Air cap, fluid tips and needle are fully interchangeable...

ANF Multipleheads, available in six sizes, can spray a narrow to broad pattern depending on which size is used. AR Multipleheads can produce a round pattern for line, detail, and stencil work. These Spray Guns have 1/4" fluid and air inlets. They require a minimum of 0.25 to 3 cfm. at 30 psi. pressure, depending upon viscosity of fluid and size of Multiplehead. Fluid containers must be purchased separately.

Also known as: ATD-16812, ATD16812; Specifically Designed for Waterborne Paint 100% Stainless Steel Fluid Passages, Needle & Nozzle Patented 3M? PPS? System Included High Volume, Low Pressure Minimizes Overspray Fully Adjustable Wide Fan Pattern Control Superior Paint Atomization for Excellent Material Distribution Ergonomic Light Weight Design for Comfort & Less User Fatigue Nozzle Size: 1.2MM Cup Size: .6 Liter 3M? PPS? System Maximum Air Inlet Pressure: 29 PSI Average Air Consumption: 14 CFM ...

Model 95 is a high production spray gun that can be used with most coatings. It provides superior performance and efficiency. The spray gun features all stainless steel fluid passages, 60 Series air and fluid nozzles, an extra wide trigger, large control knobs, and an ergonomic forged aluminum body. Available in a variety of manual and automatic models, the Model 95 is ideal for industrial applications, touch-up spraying, automated spray systems, and test coating labortories.

This great filter will absorb up to one (1) fluid ounce of moisture and insure a perfectly dry system from start to finish every time. It absorbs oil aerosols, condensed moisture, and contaminants as small as 0.01 microns. It attaches directly to the air inlet of your spray gun and, as air passes between the filter's compressed layers, particles and moisture are trapped.

Required pressure: 30 PSI; Average air consumption: 2.8 CFM @ 30 PSI; 4.0 CFM @ 50 PSI; Fluid inlet: 1/4'' NPS; Air inlet: 1/4'' NPT

C.A. Technologies Air-Assist-Airless (AAA) Cougar Gun This gun provides an excellent finish on wood and metal at production speeds with +65% T.E. Yet only weighs 23 ounces with great feel and balance in your hand. Better than 30% fan pattern width adjustment, 2500 psi maximum working pressure, 100% stainless steel fluid passages, very fast trigger pull, 100 mesh inline filter. The standard tip is .011 x 50° angle, other tip sizes are available. By the way the replacement tips and service parts are...

* In-line filter removes dirt particles. * See-through, chemical-resistant cup. * Stainless fluid needle and nozzle. * Designed to provide optimal atomization and particle size.

Pressure-feed gun convertible to siphon feed gun. Fluid control regulates amount of paint sprayed. Includes internal and external mix air caps. 2.0 average SCFM requirement @ 90 PSI. Changes from siphon to pressure-feed for use with a variety of materials. Convertible from non-bleeder to bleeder style for use with standard or tankless air compressors. Sprays latex, lacquer, enamel, stain, and primer. Works with paint tanks and remote items. 1 Year Warranty.

Used for all kinds of medium to high viscosity fluid/painting/coating,inorgan ic-zinc paint, epoxy zinc-rich primer, putty, with perfect finish for building,steel structure, construction,out-wall, road,bridge,shipyard,train,con tainer, pipe,tank,anti-corrosive, commercial,industrial,onboard maintenance etc large painting jobs.

* The FX2000 conventional air spray gun delivers an excellent automotive finish when HVLP is not required. * Innovations of the Finex gun include 29% fewer parts, precision lids, repair kits, optional 3M™ PPS™ adapter, optional interchangeable aluminum cups and lowest trigger pull among all guns in its class. * Fluid Tips: 1.4 mm. * Air Consumption (cfm): 9.5 SCFM. * Dry Weight Without Cup: 359 g. * Air Inlet npsm: 1/4 in. * Cup Size: 600 cc. * Pattern Size: 12.0 in. * Warranty: 1 year.

* Includes one-quart anti-drip canister. * Built-in air adjusting valve provides easy adjustment of air at tool. * Stainless fluid needle and nozzle is compatible with today's advanced coatings. * Designed to provide optimal atomization and particle size.

Provides full size pattern. Nickel plated body. Fluid and pattern controls. The siphon-feed detail spray gun provides full size pattern in a small package. 4.2 average SCFM requirement at 90 PSI. 1 Year Warranty.

* The FX2000 conventional air spray gun delivers an excellent automotive finish when HVLP is not required. * Innovations of the Finex gun include 29% fewer parts, precision lids, repair kits, optional 3M™ PPS™ adapter, optional interchangeable aluminum cups and lowest trigger pull among all guns in its class. * Fluid Tips: 1.3 mm * Air Consumption (cfm): 9.5 SCFM * Dry Weight Without Cup: 359 g * Air Inlet npsm: 1/4 in * Cup Size: 600 cc * Pattern Size: 12.0 in * Warranty: 1 year