104 results for "AY McDonald 5050CUEF Duramac Sewage & Effluent Pump 1/2 HP" between $250.00 and $700.00

AY McDonald 6191115 5050CUEF Duramac Sewage & Effluent Pump 1/2 HP. Rugged cast iron construction, 1/2 HP continuous duty, thermal protected motor, pumps up to 70 gallons per minute

1/2HP PSC Submersible Sewage Pump The 10SN Series submersible pump from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to...

Exclusive Full Lifetime Warranty. Heavy-duty, rugged CI with Auto. operation. Handles 2" solids. Pumps up to 9000 GPH. High Efficiency motor w/ overload protection. 2" Standard Code discharge. 10 FT. power cord (20 ft. avail). Min. sump diameter 18".

1/2 HP 120 GPM Manual Energy Saver Submersible Sewage Pump The ES50 model pumps from Little Giant are energy-saving, high performance, fully submersible sewage / effluent / high-capacity sump pumps, designed for the professional plumbing contractor. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance.1/2 HP permanent spilt capacitor motor with energy-saving low amp drawDesigned for continuous dutyEpoxy coated cast iron housing2" FNPT (51 mm) dischargeCarbon...

S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-filled and has ball bearings, motor is PSC and includes overload protection.

No plug. 1-1/2" discharge. Upper and lower ball bearings. Automatic thermal overload protection. 12-month limited warranty.

Sewage Sump pump is ideal to pump sump water or septic tank effluent. The large 1/2 HP model can handle raw sewage and waste water from basement, washrooms and laundry rooms. Ideal replacement for cooling systems. 1/2 HP, 14 amps, 1550 RPM, pump dimensions: 10 3/4" x 13 3/4", discharge open: 2", suction open: 2", solids handling: 2", sump depth: 30'.

The 10SN Series submersible pump from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage...

Ideal for liquid effluent pumping and residential raw sewage applications, as well as light commercial applications.620221. Power cord sealed at motor housing. Solids handling non-clog impeller. Motor has an oil filled chamber with automatic overload protection, double ball bearing. Capacitor start designed for hi-torque and is thermally protected with automatic reset. Mercury float switch for automatic on-off operation; piggyback style. SS fastener. Solids Handling Capability: 3/4". 5/8"...

Internet prices apply only to Internet purchases. Minimum order amount is $20.00. All merchandise listed is in stock. Orders are shipped the next business day. We only sell within the 48 adjacent United States. Shipping tracking numbers are e-mailed automatically. Office hours are: Mon - Fri, 8am - 5pm EST excl. holidays.

Corrosion resistant powder coated epoxy finish. Durable cast iron construction. Cast iron switch case, motor, pump housing and base. No sheet metal parts to rust or corrode. All castings are cast iron class 25-30 25000# tensile strength. Stainless steel screws, guard, handle, arm and seal assembly. Float operated submersible (NEMA 6) 2 pole mechanical switch. Permanent split capacitor motor, oil filled and hermetically sealed, automatic reset thermal overload protection. Bearings - upper...

Dominator 1/2 HP 110 GPM 115V Submersible Sewage Ejector Pump with Integral Snap-Action Float Switch and 10 Cord The Dominator(R) submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater...

Vertical float switch. Provides automatic control of a pump in water and effluent or sewage applications. The float switch stop can be moved up the rod to adjust the pumping range from 6.5" to .75". Upper and lower rubber grommets act as float stops. Includes hardware to mount to pump discharge pipe. 10 foot line cord with piggy back plug. 120vac and Max. amps 13 or 1/2 HP. UL / CSA approved. Converts any manual pump, up through 1/2 HP(115V) and 1 HP (230V), to automatic operation. Designed for...

Domestic wastewater and septic systems. Light commercial sewage. High capacity fluid transfer. UL, CSA, SSPMA and ETL listed. Oil-filled for cooler operation, constant bearing lubrication. Single phase PSC motors eliminate starting switches. Recessed impeller increases bearing life. Thermal overload protection with automatic reset. Liquids Handling: raw sewage and sewage effluent. Min. Sump Dia.: Simplex 24 in. Min. Sump Dia.: Duplex 30 in. Bronze Vortex Impeller. 20 ft. power cord on...

Unassembled Pit Plus(tm) Simplex Package System with 1 Slip-Fit Cover, 1/2 HP Pump and Indoor High Water Alarm For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Packaged units are provided "unassembled" with all components inside of the basin. 1/2 HP Sewage ejector pump handles liquids and solid waste materials up to 2" diameter Automatic operation with dependable remote float switch Large capacity (45 gallon) roto-molded...

Pre-Assembled Simplex Package with Roll-Top Molded Polyethylene Basin, Slip-Fit Flanges and High Water Alarm For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Pre-assembled system is delivered ready to install.Multiple basin styles to choose from - molded poly, structural foam or roll top polyOne- or two-piece cover options availableSlip-fit or bolt-on cover flange options available4/10 HP or 1/2 HP sewage pump options...

Unassembled Pit Plus- Simplex Package System with 2 Piece Bolt On Cover, 1/2 HP Pump and 2" Check Valve For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Packaged unit is provided "unassembled" with all components inside of the basin.Roto-molded polyethylene basin in two size options: 20" x 30" or 24" x 24"Radial rib design for extra strength360 degree molded handle for easy handlingMolded torque stops at basin bottom...

Unassembled Pit Plus- Simplex Package System with 2 Piece Bolt On Cover, 1/2 HP Pump and Indoor/Outdoor High Water Alarm For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Packaged unit is provided "unassembled" with all components inside of the basin.1/2 HP Sewage ejector pump handles liquids and solid waste materials up to 2" diameterAutomatic operation with dependable remote float switchLarge capacity (45 gallon) roto...