80 results for "AL1012ULM-Multi-Output Access Control Power Supply Charger" between $100.00 and $600.00

AC input and DC output LED indicators. Thermal overload protection. Built-in charger for sealed-lead-acid or gel-type batteries. MEA approved (NYC Department of Buildings 18-98-E). 2 circuit breaker outputs (1 switched and 1 maintained). CSFM approved (California State Fire Marshal). Short circuit protection. Filtered and electronically regulated output. Class 2-rated. Automatic switch-over to stand-by battery when AC fails. UL listed U.S. and Canada Access Control (UL294). Latching fire...

10 Amps, 12 or 24 VDC, supervised power supply. Four (4) fuse protected outputs. 28VAC 300VA Transformer. Input 115VAC/60Hz, 2.7AMP. Accommodates up to two (2) 12VDC 7AH batteries (not included). 3/4” Knockouts. Power supply/charger: P3PS-10-SU. Maximum charge current .5AMPS. 10AMP continuous output current. Enclosure dimensions: 15.5” (H) x 13” (W) x 4.5” (D).

The P3DCAXS-7OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 7 AMPS of continuous supply current. The P3DCAXS-7OL is designed for use in an access control system.

AC fail supervision (form C contact). Built-in charger for sealed-lead-acid or gel-type batteries. UL listed for access control systems and fire protective signaling systems. (UL294 and UL1481.). Filtered and electronically regulated outputs. CSFM (California State Fire Marshal approved.). Enclosure accommodates up to two 7 AH batteries. MEA (NYC Department of Buildings approved.). Class 2 rated. AC input and DC output LED indicators. Automatic switch over to stand-by battery when AC fails...

10 Amps, 12 or 24 VDC, supervised power supply. Eight (8) programmable fuse protected outputs, Fire Alarm Interface. 28VAC 300VA Transformer. Input 115VAC/60Hz, 2.7AMP. Accommodates up to two (2) 12VDC 7AH batteries (not included). 3/4” Knockouts. Power supply/charger: P3PS-10-SU. Maximum charge current .5AMPS. 10AMP continuous output current. Enclosure dimensions: 15.5” (H) x 13” (W) x 4.5” (D).

The P3DCAXS-5OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 5 AMPS of continuous supply current. The P3DCAXS-5OL is designed for use in an access control system.

Model AL1012ULM is specifically designed for use with access control systems and accessories. This unit converts a 115VAC 60Hz input into five (5) PTC protected Class 2 Rated power limited outputs rated @ 2 amp each, with an output current of 12VDC @ 10 amp total.

UL Listed for Access Control Systems (UL294), Burglar Alarms Systems (UL603), Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment File # S4707. CSFM - California State Fire Marshal Approved. File # 7315-1335:100. MEA - NYC Department of Buildings Approved. File # 168-92-E Vol. VI. NFPA 72 Compliant. Features/Specifications. 12VDC or 24VDC selectable output. 2.5 amp...

5 Amps, 12 or 24 VDC, supervised power supply. Four (4) fuse protected outputs. 28VAC 175VA Transformer. Input 115VAC/60Hz, 1.7AMP. Accommodates up to two (2) 12VDC 7AH batteries (not included). 3/4” Knockouts. Power supply/charger: P3PS-5-SU. Maximum charge current .5AMPS. 5AMP continuous output current. Enclosure dimensions: 15.5” (H) x 13” (W) x 4.5” (D).

The P3DCAXS-5OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 5 AMPS of continuous supply current. The P3DCAXS-5OL is designed for use in an access control system.

The P3DCAXS-5OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 5 AMPS of continuous supply current. The P3DCAXS-5OL is designed for use in an access control system.

The P3DCAXS-10OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 10 AMPS of continuous supply current. The P3DCAXS-10OL is designed for use in an access control system.

The P3DCAXS-3OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 3 AMPS of continuous supply current. The P3DCAXS-3OL is designed for use in an access control system.

These Altronix power limited power supply/chargers that will convert 115VAC / 60Hz input, into two individually PTC protected 12VDC or 24VDC output, (see specifications).

12VDC or 24VDC selectable output. 4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output. 115VAC 60Hz, 1.9 amp input. Filtered and electronically regulated outputs. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup. Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators. AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Low battery and battery...

PREFERRED POWER PRODUCTS P3DCAXS-3OL-DB4 The P3DCAXS-3OL is a power supply and charger. It is engineered to convert 115VAC/60Hz input into 12VDC or 24VDC @ 3 AMPS of continuous supply current. The P3DCAXS-3OL is designed for use in an access control system. Features Filtered and electronically regulated outputs. Built-in charger for sealed lead acid or gel type batteries. Automatic switch over to stand-by battery when AC fails. AC fail and low battery supervision (form “C” contacts). AC input and...

Maxim33RD units distribute and switch power to access control systems and accessories. They convert a 115VAC 50/60Hz input into sixteen (16) independently controlled 12VDC and/or 24VDC PTC protected outputs. Outputs are activated by an normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders...