18 results for "950 Series Heavy Duty Closer - Duranodic W/ Hold Open Arm" between $75.00 and $400.00

One door closer body for all applications Adjustable spring power allows 281 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory Standard pressure relief valves for both opening and closing cycles protect the closer seals and all hardware from excessive force Heavy duty mounting bracket for easy installation of full size iron closer Retrofits existing Sargent 250 and 1250 Series Closer installations High impact non-corrosive plastic covers standard...

Includes standard cylinder body, Cush-N-Stop arm, standard plastic cover, self reaming screws and installation instructions. Available in a Plated Dull Chrome finish with others available special order. Plated finishes are more durable and applied using techniques that require more labor and equipment therefore are more expensive. This closer is handed due to the plated finish. To determine handing of door stand facing the door on the side you would need to push to open the door. The side the...

K2, QDC212, Hold Open,Painted Duranodic Bronze, QDC200, Door Closer Commercial Hold Open Arm from the QDC200 CollectionThe heavy duty QDC200 series slim-line door closers are designed for institutional, commercial uses such as educational, health care and industrial facilities where a long-lasting, highly durable product is required.Tested to significantly exceed the performance requirements for Grade 1 certification.Fully adjustable from 1-6 allowing for maximum flexibility.Delayed Action and Backcheck...

One door closer body for all applications Adjustable spring power allows 281 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory Standard pressure relief valves for both opening and closing cycles protect the closer seals and all hardware from excessive force Heavy duty mounting bracket for easy installation of full size iron closer Retrofits existing Sargent 250 and 1250 Series Closer installations High impact non-corrosive plastic covers standard...

P Offset Slide-Arm Hardware Package for Doors with 5/8 Shallow Top Rails Suitable for Doors From 30 to 48 (762 to 1219 mm) Wide Five Year Limited Warranty U.L. ListedHow To Order The CRL/Jackson 21201 Series Overhead Concealed Closer with P Offset Slide-Arm Hardware Package consists of a Closer mechanism, which depending on the selected spring size and function, is suitable for a range of doors from 30 to 48 (762 to 1219 mm) wide. The Closer is packaged complete with Cat. No. 201178 Mounting Clips...

Meets or exceeds ANSI A156.4, Grade 1 requirements. Compliance with building and barrier-free codes. Up to full 180° door opening. Heavy-duty forged arm. Spring-adjust. Captured valves. Self-drilling screws. Quik-Install™ bracket. Cast iron body. Retrofit plates. Powder painted arms. Ten-year limited warranty. Aluminum - 689 Finish.

One door closer body for all applications Adjustable spring power allows 351 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory High impact non-corrosive plastic covers standard, metal optional. Both secured with two machine screws Captivated brass valves Standard pressure relief valves for both opening and closing cycles protect the door & frame from damage caused by abuse Heavy Duty Construction Heat treated full closed rack and pinion provide control from...

K2, QDC311, Non-Hold Open,Painted Duranodic Bronze, QDC300, Door Closer Commercial Standard Tri-Pack Non-Hold Open Arm from the QDC300 CollectionThe standard duty QDC300 series door closers are designed for multi-family, tenant improvement uses such as apartment complexes, retail/storefront, small office buildings and hotels/motels where a stylish, yet durable product is required.Tested to exceed the performance requirements for Grade 1 certification.Fully adjustable from 1-6 allowing for maximum...

Tested and certified under ANSI Standard A156.4, Grade 1. ADA compliant. This closer is adjustable from size 2 to 6 and will work on interior doors up to 60" wide or exterior doors up to 48" wide, given that the doors are standard height and weight. Parallel with Hold Open arm is included. The hold open feature allows the closer to hold the door open without the need for wedges, door stops or rocks. Simply pull the door to allow the closer to close the door from the hold open position. The...