361 results for "8 bench grinder" between $10.00 and $450.00

Dust collecting port. Wheel Diam: 8 . Wheel Width: 1 . Arbor Diam: 5/8 . Power Cap.: 1 hp (Max). Phase: Single. Voltage: 115.00 VAC. Frequency: 60.0 Hz. Speed: 3450 rpm. Dimensions: 12-1/2 H x 10 D x 19 W. Control Type: On/Off. Applications: Grinding.

Independently adjustable lights, eye shields and spark guards

115 Volt/60 HZ with a 3/4 HP motor 5.0 AMP offers a speed of 3550 RPM Coarse wheel with #36 grit and Medium wheel with #60 grit Shaft length is 2-1/2 inches 40 watt worklight, Manufacturer: Kawasaki

115 Volt/60 HZ with a 1/2 HP motor 3.5 AMP offers a speed of 3450 RPM Coarse wheel with #36 grit Medium wheel with #60 grit Flexible worklight, Weight: 26.4 lbs., Manufacturer: Kawasaki

Medium grit grinding wheel Coarse and fine nylon brushes 30 and 20 ply muslin buffing wheels Emery and jewelers buffing compounds Buffing/grinding wheel dressing tool, Manufacturer: Eazy Power

3/4 hp induction motor provides superior power for industrial grinding applications Rugged cast iron base and motor housing provide durability and prolonged life Motor runs at 3,600 rpm for high speed material removal Precision-machined aluminum tool rests allow the user to accurately position work Rear exhaust ports in wheel guards for smoother operation; 12-1/2-inch distance between wheels for larger and longer grinding applications, Weight: 40.5 lbs., Manufacturer: DEWALT

Woodworking tools require maintenance to perform with quality and accuracy. Maintaining your tools allows you to get the best performance from your chisels, turning tools, axes, blades, and knives. This bench grinder is primarily designed for sharpening. With the combination of 1,725 RPM and the 8" white abrasive wheels (60 grit and 120 grit), it's ideal for sharpening without generating excessive heat that could destroy your edges. Attempting to sharpen at 3,450 RPM does not give you a properly...

Crimped wire wheels for bench grinders 6-Inch by 3/4-Inch by (1/2-Inch , 5/8-Inch ) Wire Type: 0.014 Carbon Steel 1-Pack Wire brushes available in all different styles and sizes, Manufacturer: Mercer Abrasives

Base, motor housing and end-shields made from cast iron, cast aluminum and steel depending on the model. CSA NRT/C certified, OSHA compliant. Large, cast aluminum tool rests tilt for angle grinding, Manufacturer: Palmgren

Base, motor housing and end-shields made from cast iron, cast aluminum and steel depending on the model. CSA NRT/C certified, OSHA compliant. Dust collection port and hoses on all models except 82061 Large, cast aluminum tool rests tilt for angle grinding Includes tool rest, spark arrestors, eyeshields, one 36 grit and one 60 grit grinding wheel, an 6 ft., 3-conductor power cord., Weight: 115 pounds, Manufacturer: Palmgren

Bits made from industrial S2 steel; Heavy duty blow molded storage case included M4 - M14 Bit sizes in both 30mm and 75mm lengths 3/8inch drive and 1/2 inch drive bit holders included Ideal for late model German engineered vehicles for cylinder head, headlight, and transmission fill plug applications; not intended for use with an impact tool of any kind Set includes: 3/8 inch drie bit holder, 1/2 inch drive bit holder, M4-M14: 30mm and 75mm lengths, Weight: 24.55 lbs., Manufacturer: Sunex

Bench Grinder Floor Stand - 623867000

Grinder has 3/4 hp - 560 watt motor. 3450 rpm speed. Features adjustable tool rest. Magnified eye shield. Comes w/#36 coarse & #60 medium 1" wide wheels. Auto On fixed worklight.

Die-cast base with pre-drilled holes for bench mounting. Twin work lights for clear view of work. 4.8A, 3/4HP induction motor 3450 RPM. Includes (2) 8" x 1" grinding wheels, (1) coarse No. 36 and (1) medium No. 60, magnifying safety shield, adjustable tool rest, dustproof switch.

Industrial cast iron base and motor housing provide durability and prolong life Precision-machined aluminum tool rests allow the user to accurately position work Rear exhaust ports in wheel guards for smoother operation 12-1/2in. distance between wheels for longer and larger grinding applications Adjustable tool resets 6in. 5 - 8 HP Bench Grinder is one of many Bench Grinders available through Office Depot. Made by DeWalt.

8" Bench Grinder With LightsFeatures: 540WTTS max, 120v/60 Hz, 3/4HP, Speed 3550 RPM, Sharpen Blades, Bits & Chisels, 3/4" Arbor, 2 Grinding WheelsConstruction: MetalCountry of Origin: ChinaAssembly Required: NoWeight: 27 lbsDimensions: 10.43"W x 15.16"D x 11.61"H

The Skil 3380-02 is a 6-Inch Bench Grinder with Light. Founded in 1924 as the Michel Electric Handsaw Company and renamed Skilsaw Inc. in 1926, Skil has become one of the most recognized and powerful brands in the power tool industry. From circular saws and jigsaws to sanders and drills, Skil power tools and accessories are engineered to deliver the high-performance and durability that today s growing population of Do-It-Yourselfers demand.Built-in LED work light over both wheels. Features: ...

Choose the Bench Grinder professionals choose! This ½ HP MASTER QUALITY® PT20083 Dual-Speed Bench Grinder is built with heavy-duty sealed bearings and thermal lubrication; passing a rigorous 7-point performance test before we place the Master Quality Power® label on the housing. The motor features full copper windings with tight bearing tolerances to produce quiet operation, low vibration and long life operation; the motor is UL Listed.