114 results for "68998-31 Aqua-Pure Filter Coupler" between $2.00 and $150.00

The Aquapure 68998-31 filter coupler is used to combine two 10 inch filters for use in a 20 inch housing. If the filter you want to use in your 20 inch housing is not available in a 20 inch length you can simply use a coupler to combine two 10 inch filters. Works best with Aquapure filters AP111, AP117, AP124, and AP420.

Portex Ventilator Filter with Flexible Coupler, 40/cs

The Standard Water Filter Cartridge Coupler combines double open end water filter cartridges in order to extend the length of the water filters. The Standard Water Filter Cartridge coupler works with all brands of water filters including Pentek, Culligan, Ametek, Kleen-Plus, Bruner, Plymouth Products, US Filter, and American Plumber Water Filters. The water filters that are combined with the coupler should be approximately 2.5" in width. The Standard Water Filter Cartridge Coupler can be reused.

Joins two Big Blue (4.5" W) double open end filter cartridges in order to extend the length

Screw on unions that attach the Harward In-Line Filter to your existing plumbing. Even if your existing installation has filter unions it is best to replace to guarantee compatability and prevent leakage.

Product Description The X10 PRO PZZ01 3-phase 250A Signal Blocking Coupler is designed to attenuate (at a rate of 30:1) X10 power line carrier signals from crossing from one household to another via the AC wiring. The coupler/blocker is installed between the meter and the breaker panel, using the Copper Neutral between the two. The unit may be used in single, dual or three phase installations. For best results a PZZ01 should be installed at both homes experiencing the signal crossings. Unique...

Turbo nozzle filter is used in combination with the turbo nozzles and protects the nozzle from damage by preventing and debris from getting into the nozzle. This filter is an essential item in protecting your investment it the turbo nozzle.

High-flow, multi-housing system. Reduces bad taste and odor and chlorine taste & odor for up to 75,000 gallons. Jumbo size sediment cartridges remove up to 8 times more sediment than standard size pleated cartridges. 1" porting for flow rates up to 8 GPM. Completely assembled with filter cartridges and ready to install. Micron Rating: 25. Operating Pressure: 30-90 psi. Operating Temperature: 40-100°. I/O: 1" NPT. Overall Dimension: 15-1/4" x 8-1/2" x 26-1/2".

Marineland (Filter Part) INTAKE TUBE COUPLER ECLIPSE 2/3

Multi stage system for whole house filtration in one unit. Reduces sediment, chlorine, and improves taste and odor. Included cartridges are rated for up to 75,000 gallons. 1" NPT inlet and outlet allows for high flow installations. Rated at 7.5gpm maximum. 50 micron rating. Suitable for water pressures within the 20-85psi range and water temperatures within 40°-100°F. Includes housings as show, filter cartridges, coupler, spanner wrench, and o-rings.

Pages: 17, Digital, Horizon House Publications, Inc.

Please use the "PayPal Invoice Payment" option at checkout, so we can check your order first, before you make any payment. After checking your order, We will contact you if any additional shipping charges are required.

3M™ Scotch-Weld™ Polyurethane Reactive Adhesive Applicator Air Coupler Filter Kit is used to replace worn or plugged air coupler filters on all 3M™ Scotch-Weld™ Polyurethane Reactive Adhesive Applicators.

Application: The X10 PRO Split-Phase or 3-phase 250A Signal Blocking Coupler is designed to attenuate (at a rate of 30:1) X10 Command Signals from crossing from one household to another via the AC wiring. The Coupler/Blocker is installed between the Meter and the Breaker Panel, using the Copper Neutral Wire between the two. The unit may be used in Split or Three Phase installations. For best results, a PZZ01 should be installed at both homes experiencing the signal crossings. Unique features of the...

Couple for between the carburetor and the stock Tomos Airbox.

-10AN / 7/8 inch-14 O-ring aluminum swivel coupler fitting Allows multiple Premium series filter mounts to be mounted inline

The two filter cartridges which are used with this Pentek coupler should be approximately 2 1/2" in diameter (standard diameter filters). The Pentek cartridge coupler works with all brands of standard sized water filters including Pentek filters, Ametek filters, Culligan filters, Bruner filters, Kleen-Plus filters, Plymouth filters, American Plumber filters, US Filter filters, and all other standard diameter water filters.