|
616 - Series Stainless Steel Ruler
This popular two-sided ruler is available in 18" and 24" lengths. It is 1 1/2" wide and .032" thick. The front has inches in 16ths on the top and picas/half-picas on the bottom. There is a type gauge on the left with 5 and 8 point scales and on the right with with 7 and 5 1/2 point scales. The back has a 10 point scale on the top and an agate line scale on the bottom. The back left type gauge has 9 and 11 point scales and the right has 16 and 14 point scales. Models: AHG-61618 & AHG-61624 
|
$16.86
gwjcompany.com
|
Top stores
gwjcompany.com
$16.86
|
|
GAEBEL 605 Series Stainless Steel Rulers Item # 4031087
One-sided ruler. Made from 301 and 410 spring tempered stainless steel. Rulers are 1 1/4 in. wide and .032 in. thick. The top is inches (16ths) and the bottom is picas/half-picas. These rulers have flush starts and indented finishes.
|
$15.48
texasart.com
|
Top stores
texasart.com
$15.48
|
|
610-A - Series Stainless Steel Rulers
This two-sided ruler is 1" wide and .032" thick. It comes in 12", 24", and 36" lengths. The front has inches in 32nds and 64ths in opposite directions. The back has inches in 8ths and 16ths and is also reversed so the ruler may be read from either direction. Models: AHG-610A12, AHG-610A24 & AHG-610A36
|
$14.96
gwjcompany.com
|
Top stores
gwjcompany.com
$14.96
|
|
624-M - Stainless Steel Two-Sided Metric Rulers
The 624M Series is a two-sided metric ruler. It is 1 1/4" wide, .032" thick, and is available in 12", 18", and 24" lengths. The front has inches in 32nds for the first inch and in 16ths for the rest on top and picas/half-picas on the bottom. The back has two metric increments going in opposite directions. The top increments are in millimeters and the bottom is in half-millimeters. Models: AHG-624M12, AHG-624M18 & AHG-624M24
|
$14.73
gwjcompany.com
|
Top stores
gwjcompany.com
$14.73
|
|
24 in Stainless Steel Corkback Ruler
This ruler is one-sided with a corkback and is 1 1/8 in. wide and is .020 in. thick without corking and approximately .072 in. with cork backing. It has inches (32nds the first 1 inch and 16ths) both top and bottom. Lengths available: 6, 12, 15, 18, 24, & 36 inches. 100 Series Size 15 inches 18 inches 24 inches RR10024 RRL10024
|
$11.00
supportproducts.com
|
Top stores
supportproducts.com
$11.00
|
|
Two-Sided Steel Rulers 24 in.
Gaebel stainless steel are made in U.S.A. and have been for over 55 years, using 301 and 410 spring tempered steel. Series 601 and 603 are identical to each other except in length. These rulers are 1 1/4 in. wide and .032 in. thick. Both edges on the front have inch in 16ths scale. The back has pica/half-pica increments on the top and agate line increments on the bottom. These rulers have flush starts and indented finishes. Series 604 is 1 1/2 in. wide and .032 in,
|
$11.69
|
Top stores
misterart.com
$11.69
|
|
604-B Series Stainless Steel Ruler
This two-sided ruler in available in a 24" length only. It is 1 1/2" wide and .032" thick. The front has inches in 16ths on the top and in 32nds on the bottom. The back has picas/half-picas on the top and agate lines on the bottom. This ruler has a flush start and indented finish on both sides.
|
$16.15
gwjcompany.com
|
Top stores
gwjcompany.com
$16.15
|
|
605-P - Series Stainless Steel Rulers
This two-sided ruler is available in 12", 18", and 24" lengths. It is 1 1/4" wide and .020" thick. The front has inches in 16ths and picas/half-picas. The back contains point markings the entire length. Models: AHG-605P12, AHG-605P18 & AHG-605P24
|
$12.83
gwjcompany.com
|
Top stores
gwjcompany.com
$12.83
|
|
73 - Stainless Steel Ruler
This two-sided ruler is 1/2" wide and is available in 6", 12", 18", and 24" lengths. It is photo-etched/chrome finished for clear, fine precision lines. The front has inches in 32nds and 64ths; the back is in 10ths and 100ths. Models: MIS-G736, MIS-G7312, MIS-G7318 & MIS-G7324
|
$18.95
gwjcompany.com
|
Top stores
gwjcompany.com
$18.95
|
|
622 Series Stainless Steel Scaling Ruler
The 622 is a two-sided scaling ruler with a width of 1 1/4" and thickness of .032". It is available in a 24" length only. The front side has 1/3 off; 1/2 up increments (each increment is equal to 1 1/2 for scaling) on the top and inches in 10ths on the bottom. On the back there are inches in 16ths on the top and 12ths on the bottom. The center has inches incremented in inches/feet and a zero-center scale incremented in 1/2".
|
$15.68
gwjcompany.com
|
Top stores
gwjcompany.com
$15.68
|
|
24 Inch Two-Sided Ruler 64ths & 32nds-front/16ths & 8thsback
24 in. two-sided stainless steel ruler. Front in 64ths & 32nds. Back has 16ths on the top and 8ths on the bottom edge. 1 in. X .032 in. Available in 12, 24, & 36 inches. Size 24 inches RR610A24 RRL610A24
|
$15.75
supportproducts.com
|
Top stores
supportproducts.com
$15.75
|
|
24 Inch One-Sided Ruler 16ths on top & 32nds on the bottom
24 in one-sided stainless steel ruler. Top with 16ths & 32nds on the bottom. It has a sub-zero scale in 32nds and 64ths. 7/8 x .020 inch. Size 24 inches RR60824 RRL60824
|
$11.50
supportproducts.com
|
Top stores
supportproducts.com
$11.50
|
|
Board & Batten, 3/16 Inch Spacing, 1/16 Inch Thick x 3-1/2 Inches Wide x 24 Inches Long
All Micro-Mark Miniature Lumber is clear, kiln-dried No. 1 grade. Wood sheets are micro-sanded both sides. Siding and moldings are precision milled and require no sanding. For cutting sheet stock into narrow strips, we recommend Table Saw #50304 for thicknesses up to 1/4 inch. For thicker sizes and plywood use the MicroLux Tilting Arbor Table Saw, #80463.
|
$4.15
micromark.com
|
Top stores
micromark.com
$4.15
|
|
604-A - Stainless Steel Printers Comparative Ruler
The 604A printers comparative ruler is a two-sided ruler available in a 24" length only. The front has inches (16ths) on both edges and a line scale with markings from hairline to 2-point on the left end. A US point conversion table is on the right side of the front. On the back is pica/half pica increments on top, inch (16ths) increments and an agate line scale on the bottom. A point sale from 0-84 points is on the left end of the back.
|
$16.15
gwjcompany.com
|
Top stores
gwjcompany.com
$16.15
|
|
604-C - Stainless Steel Printers Comparative Ruler
The 604C printers comparative ruler is a two-sided ruler available in a 24" length only. The front has inches (16ths) on the top and millimeters on the bottom. The back has picas/half-picas on the top and agate lines on the bottom.
|
$16.15
gwjcompany.com
|
Top stores
gwjcompany.com
$16.15
|
|
24 Inch One-Sided Ruler see extended
One-sided stainless steel etched ruler. Inches graduated in 32nds on the top (16ths only on 36 & 48 inch). Bottom is in picas. Available in 12, 18, 24, 36, & 48 inches. Size 18 inches 24 inches 36 inches 48 inches RR60548 RRL60548
|
$12.50
supportproducts.com
|
Top stores
supportproducts.com
$12.50
|
