1503 results for "600 watt amplifier" between $75.00 and $1,000.00

600 watts maximum output. 4 channel at 60W x 4 RMS at 4 ohms. 3 channel at 60W x 2 plus 240W x 1 at 4 ohms. 80Hz low/high pass filter. RCA and speaker level inputs. Dimensions: 15-7/8"W x 2-1/4"H x 10-3/8"D.

600W x 1 Car Amplifier 600 watts RMS x 1 at 4 ohms,Class-D design,stackable installation design with front-mounted controls

With Q Series' efficient Class-H design, the permanent voltage rail is designed to cover the average music signal, rather than supplying the voltage for maximum output power. If dynamic peaks require a higher output voltage, the voltage rail is switched to the maximum. This process saves up to 50% of the power consumption found in conventional amplifier designs, and results in a dramatic reduction in heat output. Q Series combines the sonic excellence and ruggedness of its Precision Series predecessors...

The audio power circuitry in the PLX3102 achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic...

The A500 Reference Amplifier is the ideal choice for recording studios, post-production suites, or anyone seeking audiophile-grade performance—without the audiophile-grade sticker shock.

Product Description 4 CHANNEL - 600W MAX BUILT-IN FULL CROSSOVER SLOPE LOW PASS FILTER 40 HZ~160HZ HIGH PASS FILTER 60HZ~1.2KHZ INPUT SENSITIVITY CONTROL BASS BOOST CONTROL 0~18DB HIGH & LOW IMPEDANCE INPUT RCA BYPASS LINE OUTPUT THERMAL AND SHORT CIRCUIT PROTECTION 2 OHM STABLE VERY LOW THD

600W Mono Block Amplifier

The STM-600 is our 600 watt version of the Streamliner? design. The 300 volt All Tube Class A preamp design is driven by three 12AX7 preamp tubes utilizing six gain stages. The preamp design features an intuitive and highly effective tone network which is a unique blend of a modified passive Baxandall network for the bass and treble along with an active tube driven mid filter, with selectable mid frequencies. This versatile all tube preamp exudes a fat and rich tone that remains articulate. It can...

Product FeaturesHigh Power Professional Power Amplifier Power Handling8 Ohms: 600 Watts X 2 Chan. 4 Ohms: 1000 Watts X 2 Chan.2 Ohms: 1350 Watts X 2 Chan.Bridged @ 8 Ohms: 2000 Watts X 1 Chan.Bridged @ 4 Ohms: 3000 Watts X 1 Chan.Optimized For Maximum Headroom Into 2, 4 And 8 Ohm Speaker SystemsAir Guided Front-to-rear Airflow And Cooling Fan For Thermal Stability And ReliabilityXlr And Trs (6.5mm Jack) Balanced InputsAuto Limitation Circuit Built In For Amp Output ProtectionStereo, Parallel Mono...

Samson Servo 600 Power Amplifier The Samson Servo 600 Power Amplifier is ideal for larger applications where added power is needed to drive multiple speaker chains, or larger format speakers.The Servo amplifiers feature large 10-segment 3-color level LED meters and independent channel volume controls. The rear panels include 1/4-inch balanced and RCA input connectors, as well as 5-way binding post and 1/4-inch speaker outputs. 4-stage power protection circuitry that ensures optimal performance and...

Constructed from UV and corrosion-resistant materials and finish, this amp is ready for the seas. Alpines PDX series digital switch-mode amplification yields incredible sound quality. Advances include improved feedback circuitry that faithfully reproduces the input signal for improved dynamic range and higher fidelity. Unique design and quick-disconnect plugs allow clean, fast, and easy installation. Damping factor is 350% better than Class A/B amps. Stays efficient at all power levels. This produces...

Product Description Chaos Wired 2 Channel 600 Watts CHAOS WIRED 600 Watts, 2-Channel MOSFET Power Amplifier, Remote Subwoofer Level Control

The AP2020 weighs a comfortable but solid 35 pounds, fits into two rack spaces, and has the best distortion and noise specifications you will find anywhere. Unique 2 or 4 Ohm optimum load operation gives the AP2020 amp flexible output power as required. A simple user definable configuration allows it to deliver 600 Watts per channel continuous average into either 2 or 4 Ohms.Features:40Hz, 12dB Octave High Pass FilterFront to Rear Cooling PathToroidal TransformerBaked, Black Painted Exterior FinishDC...

4ch full-range amplifier. 2ohm Stable. 50 Watts RMS x 4ch (4ohm). 70 Watts RMS x 4ch (2ohm). 150 Watts RMS x 2ch (4ohm Bridged). Mosfet Power Supply. Variable High-pass crossover 50~500Hz, 12dB/Octave. Variable Low-pass crossover 50~500Hz, 12dB/Octave. Frequency Response : 20 - 40KHz. Short Protect / DC Protection / Thermal Protection / Soft Turn On-Mute. Damping Factor > 500. Double Side FR4 PCB.

Grow Your Passion! Output power: 600W @ 4 ohms; 960W @ 2 ohms High continuous current output from robust toroidal transformer Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect Speakers Front mounted detented gain controls for easy access Bridge mono and parallel mode LEDs Fast Recovery design for lower distortion if clipping occurs Very rugged housing Active balanced inputs for low noise Signal level at -40, -20, -10, protect and clip LED...

12 Channel Input Channels. Balanced Line Inputs. XLR input. Two Stereo Input Channels. Balanced Trs Jacks. Peak Led Mono And Stereo Channels. 1/2'' Aux Effects Send/Return Loop. 7 Band Mono Or Stereo Equalizer. Total Power 600 Watts 4 Ohms. Dimension 21''H x 20''W x 12.59''D. 110/220 Volt Switchable. Weight 30.86 LBS.

Marine Amplifier - 4 x 65W. Peak Power: 600W. Frequency Response: 25Hz-kHz.

The Prime M600-4D amplifier is a 600 Watt 4-channel high efficiency Class-D amplifier specifically designed for Marine and Powersport applications. The amplifier printed circuit board is conformal coated with a UV resistant finish that conforms to industry standard UV and Salt-Fog specifications, and the Class-D circuit topology is so efficient, it consumes much less current from your charging system over traditional Class-A/B amplifiers.