27 results for "6.1 crate hemi" between $700.00 and $50,000.00

2008 Charger / 300 / Magnum / Challenger - SRT-8 Models

This cast iron 6.1L Hemi engines deliver horsepower and torque right out of the crate. P5155437 includes factory wire harness and throttle body.

Remove and store your rare numbers-matching original Hemi and replace it with a Mopar 426 Hemi Crate Engine. Here’s classic power to move you - 465 horsepower and 486 ft-lbs of torque under your right foot. For maximum performance, Mopar recommends the use of a 750 cfm Holley carburetor (P4349228) and 2.00" exhaust headers (not available through Mopar). Specifications: * built with all-new components * heavy-duty cast iron block with cross-bolted mains * cast iron cylinder heads * chrome valve...

Mopar crate engines, or as we like to call them, "Tach in the Box," provide an instant boost of horsepower and performance for your classic muscle car. Just drop 'em in, turn the key and go.

If modern technology with a touch of "Old School" is your flavor, Mopar's 5.7 Liter Carbureted HEMI Crate Engine may be what you're looking for. It also comes with "Plug and Play" technology and can accept low pressure (5-7 psi) fuel delivery systems found on many past model vehicles. The 5.7L Crate Carbureted HEMI Produces 360 HorsePower at 5,400 RPM and 360 Ft. Lbs. of Torque at 4,200 RPM.

Mopar’s fire-breathing, 525-HP fuel-injected 392 Hemi crate engine is an all-new engine assembly for a new generation of Mopar enthusiasts. Comes complete with a preprogrammed engine controller and harness to ensure compatibility with virtually any vehicle configuration. The original 392 Hemi was introduced on 1957 Chrysler and Imperial models, replacing the 354-cid version of the Hemi from 1956. Drop in a 392 Hemi and drop in a legend! Specifications: * deep-skirted cast iron block with cross...

* Built with all-new components. * Heavy-Duty Cast Iron Block with cross-bolted mains. * Cast Iron Cylinder Heads. * Chrome Valve Covers. * Breathers. * Stainless Steel 2.25" Intake Valves and 1.94" Exhaust Valves. * Heavy-Duty Single Valve Springs with Dampers. * Premium Material Valve Stem Seals. * 292° Hydraulic Camshaft — 0.524"/0.507" lift. * Forged Pistons — 4.250" bore, 9.0:1 compression ratio. * Aluminum Dual-Plane M1® 4-bbl Intake Manifold. * Forged Steel Crankshaft — 4.150" stroke...

But Wait, Your Asking Yourself, "What about all of the front end components, AC, PS, Alternator, Brackets, & Idler Pulleys??". Just remember, your purchasing from BPE, We Always Have A Cure! We now also offer, Complete Front End Component Kits, with Everything, Even the Belt! We also have Already Figured out the AC Systems, Power Steering, Custom Harness's, and Custom PCMs. All you have to do, is get one of our 5.7L/6.1L/6.4L/7.0L/7.2L Hemi Complete Underhood Condenser Kits, that comes with...

Note: Crate engines that change the emissions performance of the vehicle may not be legal for use on vehicles regulated for highway use in California and other states. HorsePower and Torque rating based on test engine. Ratings may vary on individual engines. Not Legal for sale on pollution - controlled vehicles or vehicles registered for highway use.

* Built with all-new components. * Heavy-duty Siamesed Bore Cast Iron Block with cross-bolted mains. * Aluminum Cylinder Heads. * Black Cast Aluminum Valve Covers. * Breathers. * Stainless Steel 2.25" Intake Valves and 1.94" Exhaust Valves. * Heavy-Duty Single Valve Springs. * Premium Material Valve Stem Seals. * 292° Hydraulic Camshaft — 0.524"/0.543" lift. * Forged Pistons — 4.50" bore, 10.25:1 compression ratio. * Aluminum Dual Plane M1® 4-bbl Intake Manifold. * Forged Steel Crankshaft...

The 5.7 and 6.1 Hemi in the 300C intake system actually allows you to break the tires loose! This intake gives you the performance that you can feel and includes a new air duct that flows into the air box through a high flow filter with a velocity stack built into it. The system pulls air from the front of the vehicle and an added air scoop on the bottom of the Volant air box for that continuous charge of cold air. This Volant intake not only gives you more power, it looks great under the hood, much...

The Mopar 540 Aluminum HEMI Crate Engine is built for extreme Hot Rods and Pro Street Cars. This is for the person who wants horsepower and durability of a race engine and the drivability of a street engine. Available in Carbureted or SuperCharged versions (Carburetors and EFI Systems Sold Separately), it can produce up to 900+ Horsepower, depending on induction. This HEMI is a fully water jacketed motor with a streetable camshaft, and it's made with an all aluminum block that's stronger and lighter...