414 results for "6 channel amp" between $75.00 and $1,000.00

Headphone level control. Mix control (blends signals from input pairs A and B). Mute switch (mutes input pairs A and B). Stereo external input with level control. Mono switch for external input. Stereo (L/R) line outputs.

4 Stereo line inputs. Channel Noise < -120dB. 6 headphone amplifiers. Distortion < .05% 20Hz- 20kHz. Volume control per channel. 110v-220v internal power supply. Selector switch for each input source (1-4). Size: 45 x 482 x 152 (mm). Headphone output impedance 22 ohm. Housing: Metal. Output level 300mW @ 33 ohm.

This Marine Amplifier features Advanced Thermal Rollback Protection, so it automatically rolls back peak voltage under tough conditions to protect your amp while continuing to play at a safe level. This amp is compatible with almost any system thanks...

100% analog SansAmp XLR Output works like a built-in direct box to deliver the true tone of the amp to the PA desk or studio board; Master Section features active Low and High EQ controls Top-of-the-line, full-length Accutronics 6-spring reverb Boost function for solos, increases the volume level up to 9dB without altering your tone.

2 hr Advanced Store Bought 1 Channel Amp install2 hr Advanced Store Bought 1 Channel Amp install

Product Description Laney CD650 6 Channel Mixer w/ 500 Watt Amplifier and Digital FX Channels 1, 2, 3 &amp; 4: XLR Mic Input, Jack Line Input, Pad Switch, Gain, Bass, Middle, Treble, Digi-FX send, Monitor Send Channel 5: As Above Except XLR &amp; 2 Jacks Inputs Channel 6: As Above Except XLR &amp; Dual RCA Inputs Master: 2 x 7 Band Graphic EQ, 2 x 5 Band Bargraph Level Indicator, Master Volume Control, FX to Main Level, FX to Monitor Level, Tape/CD Input Jack and Dual RCA with Level Control, Record Output Dual...

This heavy duty power supply is specially designed to power 16 cameras from one central location. Each of the 16 outputs are fuse protected. Output fuses are rated @ 500mA, 115VAC 50/60hZ while the input fuses are rated @ 3.5 amp. Each output is separately fused with LED indicators for each fuse. Comes with 30 day money-back guarantee and a lifetime warranty.

* 6 channel hybrid pack with dual 20A Edison sockets per channel. * Each channel can be assigned to Dim or Switch modes. * 4 function LEDs for DMX Address, Patch Address, Local Control, and Dim/Switch modes. * On board Local Control allows for dim intensity adjustment, from 0-100%, for each channel. * Dual 20A/AC120V Power line cords. * Digital LED-display. * Two 20 Amp circuit breakers. * Panic function dip switches. * 3 &amp; 5 pin XLR inputs and outputs.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sinewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global...

Package Includes: (1) New PCX4.360 360w RMS 4 channel car amplifier (1) DB Link XK8B2 8 gauge complete wire kit Description of PCX4.360: The Picasso amplifiers combines an excellent look with excellent quality, to give you the best bang for your buck.. Featruing a glossy black hairline anodized heatsink, these amps were made to be shown off. They also come with sleek black endcaps to hide all of your wiring! The Picasso amplifiers are a class AB amplifier with a fully regulated mosfet PWM power...

* Built-In Crossover.

The PowerMax3 is a modular CCTV power supply and distribution unit. Its innovative modular design provides the ability to utilize custom configurations of 4, 8,12, 16, 20, 24, 28 or 32 individually fused outputs for powering CCTV cameras and accessories. 12VDC or 24VAC modules can be combined in the same rack space. The PowerMax3 can be ordered fully loaded or parts can be ordered individually. All cards are &amp;#147;hot swapable&amp;#148; and are easily servicable from the front of the rack.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sinewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global...

2- Channel independent fourth-order Linkwitz-Riley crossovers. DDT. Revolutionary IPR class D topology. Detented input controls. Combi XLR 1/4" inputs. Combo twist-lock output connectors. Light Weight. Individual signal pass 1/4" jacks on each channel. LED illuminated. Weight Unpacked: 7.03 lb(3.19 kg). Weight Packed: 9.41 lb(4.27 kg). Width Packed: 12.5"(31.75 cm). Depth Packed: 21"(53.34 cm). Height Packed: 4.75"(12.065 cm).

UL Listed for Commercial CCTV Equipment (UL2044), CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment. File# E148639. CE Approved. 24VAC or 28VAC selectable output. 12.5 amp @ 24VAC (300VA) or 10 amp @ 28VAC (280VA) supply current. Sixteen (16) fuse protected outputs. Output fuses are rated @ 3.5 amp. 115VAC 50/60Hz, 3 amp input. Surge suppression. Individual AC power LED indicators. Illuminated Power Disconnect Circuit Breaker with manual reset. Unit maintains camera...

The NTE326 is a silicon, P-channel JFET transistor, general purpose AF-amplifier in a TO-92 type case.