5154 results for "6 Hose Clamp" between $1.00 and $50.00

Hydraulic hose clamp Made from plated iron For use only on 1 wire hydraulic hoses Size: 3/4"; Hose OD range: 1-10/64" to 1-14/64" Designed and machined for hydraulic suction line applications

Automatic Pump Accessory Reinforced Discharge Hose Polyvinyl Chloride 5 Ft Lx1 In Dia

Standard service type 1/2" band clamps for auto, plumbing, household and other general use. Stainless steel band interlocked into housing construction for smooth underside. Carbon clear chromate screw and housing. 5/16" hexagon and screwdriver slotted screw.

The all-300 series stainless steel construction provides better corrosion resistance than commonly available clamps. These clamps are well suited for marine applications.

Nothing can put an end to a hill climb or quarter mile pass faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. The Nomex silicone hoses can withstand over 100 psi of boost, and are secured by rugged, spring-loaded, stainless steel T-bar clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.

#6 7-16" - 3/4" Hose Clamp - 10 pack Stainless Steel 1/2 inch wide band Slotted 5/16 inch HEX head Zinc plated carbon steel screw

Company Info My Account Helpful Links Shipping & Returns About Us Contact Us Testimonials Privacy Policy Disclaimer Follow Us My Account Login / Register Cart Order Status Ask a Pro - Q&A Forum Articles Pest Library Videos Labels & MSDS Pest Control for NY Pay By Check Site Map List of all pests Shipping Policy Return Policy Track your Order Do My Own Pest Control 5730 Oakbrook Pkwy STE 130 Norcross, GA 30093 Give us a call: 866-_581-7378 | Contact Us | Mon-Fri...

DETAILED DESCRIPTION 2003-2004-2005-2006-2007 F250/350 6.0L BD Diesel Intake Hose and Clamp Upgrade Kit Stock intercooler hose and boots blow off at as little as 25 psi. BD's silicone nomex intercooler hose and boots hold up to 75 psi, and high-torque T-bar clamps offer a tight fit.

One one the most common sources of coolant leaks are your Mustang's radiator and heater hoses. These hoses allow coolant to enter and leave the radiator and heater core to both cool the engine, and to heat the interior of the vehicle. Over time these hoses can get hard and brittle and can crack or break. Give the hoses a feel. Hoses should not be excessively hard, brittle, soft, mushy, or swollen. Includes Factory Restrictor.

This inexpensive kit will allow you to replace the old hardened and brittle fuel hose in your diesel's engine compartment as well as those old worn out factory clamps with new high quality worn gear clamps that will not cut into the rubber hose. You ask, What about that funny looking cigar shaped hose? We do sell those separately and ideally that should be your first choice, but from our experience running regularly fuel hose as the return hose works just fine. Even Mercedes went to regular hose...

Pasco 60096 6 1/2" Stainless Steel Marine or Underground Hose Clamp, 4 1/2" - 6 1/2", Stainless SteelPasco 60096 6 1/2" Stainless Steel Marine or Underground Hose Clamp, 4 1/2" - 6 1/2", Stainless Steel Features:• 5/16" Hex Head Screw• Highly corrosion resistant for marine or underground use• 201 series stainless steel band and housing with a 300 grade stainless steel, slotted hex head screw

Blastline 06B6BC400 6 Bolt Interlocking Clamp, Hose OD 4" to 5", 4" Hose ID. These clamps are used on any fitting with a collar to engage the forward gripping fingers of the interlocking clamp. Smaller size provide a safe and economical securing method for universal hose ends. Tightening of the bolts secures the clamp around the O.D. of the hose.