63 results for "5-Way HD & Component Video Distribution Amplifier (B000BMGCZY)" between $75.00 and $700.00

With its true one-to-one signal ratio, the 5-Way HD & Component Video Distribution Amplifier provides digital audio and component video to multiple locations. Connect the source device outputs to the appropriate input jacks, and then connect cabling from the unit's outputs to the desired display or recording device. The fifth output may be used as normal or to connect to another 5-Way HD & Component Video Distribution Amplifier to create more outputs.

1 to 4 High Definition or Standard Definition Video Distribution Amplifier Industries First Low-Cost, High Definition or Standard Definition Component, (Y, Pr, Pb) Video Distribution Amplifier, High Performance, Low Distortion, True One-to-One Ratio. Key Features HDTV or Standard Definition Compatible 4 outputs of (Component Video,Y, Pb, Pr)+ analog stereo audio No signal loss Low distortion True one-to-one ratio Unity gain & Cascadable Metal housing reduces...

Detailed Product Description:There is no better way to celebrate our growth than pass on amazing savings on Cablestogo 40398 9-Output Component Video & Stereo Audio Distribution Amplifier. Please consider us your source for great deals online. Our consumer electronics prices come with price match guarantee on the products, including Amplifiers-that means you will get the lowest price when you shop with us.

4-way Video And Audio Distribution Amplifier Distribute Hdtv/digital Video Signals From a Single A/v Source to Multiple Televisions, Monitors And Receivers With The 4-output Component Video Distribution Amp From Cables To Go. Daisy Chain Amplifiers Together For an Unlimited Number of Television Connections Without Degradation to The Picture Quality! This Amp Supports Cables Runs up to 150ft, Providing Maximum Flexibility. Embedded Unity Gain Technology Ensures That The Output Signal is as Clean...

The full manufacturer's warranty from CE Labs is only valid when the CE Labs AV501HDX 5-way Component Video Distribution Amplifier is purchased from an Internet Authorized Dealer . We will match any Internet Authorized Dealer's best price on the CE Labs AV501HDX 5-way Component Video Distribution Amplifier. The CE Labs AV501HDX 5-way Component Video Distribution Amplifier may be referred to by the following terms: AV501HDX .

Allows for multiple signal distribution equal to the source signal input. Four way audio/component-video distribution amplifier for Y, Cb, Cr and Y, Pr, Pb applications. Features high performance, low distortion and true one-to-one signal ratio. These professional grade amplifiers are cascadable for use in large displays and are enclosed in metal housings to reduce interference.

CONTROL: Level: -2.2dB/+2dB, EQ.: 0/+1.3dB @4.4MHz via bottom accessible trimmers. COUPLING: DC. INPUT: 4 component or composite video, 1Vpp/75 ohm looping, on BNC connectors with termination switches. OUTPUT: 2x4 component or composite video, 1Vpp/75 ohm on BNC connectors. MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 200MHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. ACCESSORIES: Power cord. K-FACTOR: 0.05%. VIDEO S/N RATIO: 73dB. NON-LINEARITY: 0.1%. POWER SOURCE: 115V, 3.2VA. DIMENSIONS...

Nominal input level: 1 volt peak to peak. Gain: unity (one to one). Input impedance: 22k ohm. Output impedance: 1k ohm. Thd: 0.05%. Frequency response: 20hz to 100khz. Channel separation: >75db. Port to port isolation: 60db. Out to input isolation: 60d. Signal to noise: 100db @ 2 volts out.

Drives up to six audio/video components from a single A/V source. Compatible with all HDTV signals, analog video, and digital and analog audio signals. Low A/V distortion for crisp sound and picture. Gold-plated RCA-type jacks. Supports component video (Y, Pb, Pr), RGBHV, and composite video. Supports analog Left & Right audio, digital audio � S/PDIF. Allows up to 150 ft. runs. �Flat Pack" design for ease of placement and mounting. Active Expansion Output � Daisy chain and maintain same great...

High Bandwidth - 365MHz (-3dB). HDTV Compatible. Dual Mode - Configure as either a 1:54 (Composite/SDI) or 1:18 (Component) DA. Grouped Level (Gain) and EQ (Peaking) Controls. Video AC/DC Coupling Selection. Looping Inputs. Selectable Input Signal Termination. Standard 19” Rack Mount Size - 2U.

Product Description The SB-3750, 5 Port Universal Distribution Amplifier is designed to work for Audio/Video applications. This Video Splitter primarily splits a Component Video, Composite Video, Digital(Coax) Audio, Analog Audio, S-Video and RGB signal from one source to five devices with compatible inputs. A built in amplifier boosts the signal to needed level, thus preventing signal loss and picture degradation. It supports maximum bandwidth of 700MHz for sharp and highly defined video in multiple...

1:6 COMPONENT VIDEO BNC DISTRIBUTION AMPLIFIER DRIVE FG1052-28

The fifth output can be used to daisy-chain amplifiers together for an unlimited number of television connections without degradation to the picture quality. Embedded unity gain technology ensures that the output signal is as clean as the input signal. High-quality and stable signal conditioning eliminates the poor picture and sound quality you get by simply using Y-cables.

Extends Component Video and stereo/digital audio, digital audio over one UTP CAT5 cable. Supports hi resolution up to 1080p. Long range transmission up to 300 meters (Max.). Dual output: 1 Component Video loop output for local, plus 1 x CAT5 RJ45 output for remote side. Built in equalization, gain adjustment, chainable CAT5 output at remote unit. Audio by digital encoding process for sound undistorted. CAT5 receiver option model: YE02DALR, YE02DALS.

Connects up to three component displays at the same time to one video source. Maintains high resolution video - HDTV resolutions 480i, 480p, 720p, 1080i, and 1080p are supported. Allows simultaneous display. Installs in seconds Input. 3x RCA connectors - YPbPr x1 or RGsB x1 (or RGBHV), or compositeDigital. SPDIF coaxAnalog. L+R RCAOutput. 9x RCA connectors - YPbPr x3 or RGsB x3 (or RGBHV), or composite. 3x SPDIF coaxAnalog. 3x L+R RCAInput Level. 1 Vp/p at 75 �. 2 Vrms max 47k �. 480MHz...

The Ocean Matrix OMX-7014 Component Video Distribution Amplifier splits a four-component input source into four identical outputs, with no discernible signal degradation. Its Input and output DC coupling and state-of-the-art video amplifying circuitry make the OMX-7014 Component Video Distribution Amplifier the first choice Video Component Distributor.

VM-4HD 1x4 SDI & HD-SDI (HDTV) Video Distribution Amplifier, 1x4 SD/HD-SDI Distribution, 8- & 10-Bit Resolution, DigiTOOLS Series, Desktop or Rackmount

The VM-30CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to three identical outputs.