14 results for "5942-B03 Petzl Shunt Petzl" between $50.00 and $75.00

DescriptionThe Shunt from Petzl offers a mechanical replacement for self-jamming knots (Prussik, Machard, Auto-block, etc.). Positioned below a descender, the Shunt acts as a back-up belay for an abseil descent. It locks onto the rope as soon as you release it and follows your descent when you press on it.

Petzl Shunt Ascender | 471161 -- The Petzl Shunt multi-purpose device is designed for ascending as well as a backup brake for rappelling, occasional self-belays, or top rope belays. Will lock on single or identical double kernmantle ropes but not on braided ropes; fits single ropes from 10 - 11 mm and double ropes from 8 - 11 mm. Loads onto a rope without having to unclip; can be used as a back-up on descent or rappel when placed below the descender. A mechanical version of a Prusik hitch or Machard...

The Shunt is Petzl's mechanical version of a Prusik hitch or self-locking knot. It locks onto either a single rope or double ropes of the same diameter and holds well on icy and muddy ropes. It's ideal for backing up a descent with a Figure "8" or other device. The SHUNT frame must be held to descend. It locks off if the hand is removed. Individually tested to 5kN. For double ropes from 8mm to...

This item is a Rescue Response Gear Red iBex approved Petzl product to fill your various needs for use in rope rescue and industrial rope access fall protection when using equipment such as webbing, rope, anchors, harnesses, helmets, gloves, belay & rappel devices, ascenders, pulleys, carabiners and other approved hardware in professional swiftwater, firefighter, canyoneering, work at height, positioning, suspension and fall arrest when climbing and descending, mast and tower climb, telecoms, wind...

The Petzl Shunt is a mechanical replacement for self-jamming knots like the Prusik and the Machard. Positioned below a descender, the Shunt acts as a back-up belay for a rappel descent. It locks onto the rope as soon as you release it and follows your descent when you press on it. For use on single rope (10 to 11 mm) or double (8 to 11 mm).

Back-up device / ascender A mechanical replacement for self-jamming knots (Prusik, Machard, etc.). When positioned below the descender, the SHUNT can be used as a back-up device to protect a descent on rappel. Brakes when device is released. Certification CE, UIAA Technical specifications For use on single ropes (10 to 11 mm) or double ropes (8 to 11 mm) 188 g Read a Statement from Petzl on special use of the Shunt

Use the Shunt from Petzl back-up rope clamp below the belay device in place of a mechanical prusik knot. Install it on your rope easily by locking its smooth, rope-friendly clamping surfaces onto either single or identical double ropes for added security on ascents.