1230 results for "500 watt amplifier" between $75.00 and $800.00

AUDIOBAHN A4002V Audiobahn Mono Block Series Car Amplifier. 500 Watt Rated Power. RMS Power: 4 Ohms Stereo: 100W x 2. RMS Power: 2 Ohms Stereo: 200W x 2. RMS Power: 4 Ohms Stereo: 400W x 1. RMS Power: 2 Ohms Mono: N/A Class A/B MOSFET Circuitry. Class A/B MOSFET Circuitry. PWM MOSFET Power Supply. Double-Sided Glass Epoxy Circuit Board. THD: 0.02%. S/N Ratio: >100dB (+/- 1dB). Frequency Response: 10Hz - 40KHz. Variable 18dB Hi-pass Crossover: 50Hz - 750Hz. Variable 18dB Low-pass Crossover...

All the features and proven reliability. The PV 1500 features Peavey's patented DDT distortion detection technique virtually eliminating distortion. It also features Peavey's patented V-cooling design, which cools the power transistors more evenly than traditional heat-sink designs. This powerful 2-rack space amp features a built-in 150 Hz crossover proving once again that Peavey power reigns.

Prime Series. Rated Power: continuous power 320 Watts RMS x 1 @ 4-Ohms 500 Watts RMS x 1 @ 2-Ohms. Total Power: 500 Watts. Circuit Topology Class Class A/B. Frequency Response 20Hz to 250Hz +/-1dB. Dimensions (HxWxL) 2.40 x 7.67 x 16.65 (in).

Custom made plug-n-play wiring harnesses are included with this amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.

Found on stages all over the world, the Hartke 5500C bass amplifier is back in classic black. Yet, it retains all the same rock-solid performance and features as the original that have made it one of the most popular bass amplifiers of all time. The 5500C's unique circuitry ensures that every nuance of your bass performance is faithfully reproduced. Featuring two pre-amp input knobs for custom blending of tube and solid state tone and a ten-band graphic EQ, the 5500C is ideal for the player who wants...

* Do not be fooled by the small size. Class G/H amplifiers make more power for their size than traditional designs and offer much lower THD and higher damping factors than Full Range Class D amplifiers.

Specifications: 2 x 500 Watts Max Output1 x 1000 Watts BridgedDual Fully Adjustable Electronic CrossoverSoft Turn On/Off Circuit2 Ohm Stereo StableDual MOSFET PWM Power SuppliesVariable Gain ControlRemote Turn OnHeavy Duty Aluminum Alloy Heat SinkHi/Lo Level Molex InputPower & Protection L.E.D’sS/N Ratio: >95dBFrequency Response: 15-30KHzTHD: <0.04%Fully Protected CircuitryDimensions: 11.1''W x 2.2''H x 7.5''LFuse: 15A x 2No Remote Bass Boost ControllerUPC: 068888898737

BRAND NEW Lanzar VIBE232 1200 Watts 2 Channel Mosfet Amplifier. 2 X 300 Watts RMS @ 4 Ohms. 2 X 600 Watts Max @ 4 Ohms. 1 X 1200 Watts Max @ 4 Ohms Bridged. 2 X 500 Watts @ 2 Ohms RMS. MOSFET Automatically Switches To Maintain Rated. Power Over A Wide Range Of Battery Voltages. Stiffly Regulated PWM-Type Power Supplies. Variable Input Level Controls For Each Pair Of Cannels. Variable High Low Pass Crossover Controls. High-Efficiency, Heavy Aluminum Heatsink. Remote Subwoofer Bass Control...

What I found most surprising, however, is that while the M-800A is rated at 60Wpc, it never compressed dynamically or gave other signs of running out of power with the Wilson Audio MAXX 2s. Speakers and amp played at nearly rave-approved levels for as long as I could tolerate it. On the other end of the volume spectrum, M-800A was very quiet, never obscuring fine detail amidst its own noise. Where the B-1000f monoblocks...

Item #: 2643366 Model #: FM-504 Fusion 4 Channel Amplifier - 500w: 4 Channel Amplifier Add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music. Generally, a 4 Channel Marine Amplifier can be used to power two pairs of Marine Speakers and a Marine Subwoofer. Marine Amplifiers feature anti-corrosion treated PCBs and stainless steel end panels to maximize corrosion protection. 65 Watts...

4 Channel AmplifierAdd more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music.Generally, a 4 Channel Marine Amplifier can be used to power two pairs of Marine Speakers and a Marine Subwoofer.Marine Amplifiers feature anti-corrosion treated PCB's and stainless steel end panels to maximize corrosion protection.65 Watts RMS per channel @ 4 Ohms95 Watts RMS per channel @ 2 Ohms200 Watts RMS...

500W x 1 at 2 Ohms Car Amplifier 300 watts RMS x 1 at 4 ohms,variable low-pass filter,variable bass boost

A subwoofer reduces strain on the full-range speaker, allowing it to play louder, or letting a smaller speaker do the same job. The GX Series supports this mode with a Crossover switch that splits the full-range input entering Ch 1, sending 20 Hz - 100 Hz to the sub (Ch 1) and 100 Hz - 20 kHz to the top box (Ch 2). The front panel gain controls balance the sub and top box, while GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range.

Output Power: 150W RMS (200 watts peak) Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS (150 watts peak) Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono). 300W RMS (500 watts peak) @ 8 Ohms, 1K Hz, 1% THD. Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms). Frequency response: (+/-01db, @rated output Power, 8 Ohms): 20Hz-20KHz. Slew Rate: 15V per use. 1/4" and RCA inputs. Banana binding post and Speakon™ outputs. Damping Factor @ 8 ohm: 260. Impedance: 20 Ohms balanced...

* 500W max power* All aluminum heatsink/endplate construction* Coated boards with endplate gaskets* Gold-plated terminals* Built-in crossover

eXcelon amplifiers are not only cool looking they contain intelligent cooling technologies. The new thermal management system found in eXcelon amplifiers continuously monitors the amplifier's temperature and operates the cooling fan when necessary. This new intelligent cooling system gives uninterrupted performace and helps maintain exceptional sound quality even under the most extreme conditions.

Thermal, Short Circuit, Overload Protection. Bass EQ. RCA Input. Optional Remote Control SPECIFICATIONS:. Voltage: 10.5 - 14.4 volts. Power Output: 1 x 500 watts. Frequency Response: 25Hz 250Hz. Max Power Output: 750 watts.