2001 results for "50 watt amplifier" between $75.00 and $2,000.00

KICKER PX100.2 now provides powersports enthusiasts with a high-power, low-draw amplifier solution for the open-air listening environment, and in a tidy little chassis smaller than a brick. PX-Series Power Amplifiers are specifically designed for motorized vehicles with small battery/charging systems, and in an incredibly small footprint that can be installed in motorcycle saddle bags or fairings, glove compartments and other previously unusable spaces.

For another first in guitar amp history, Hughes & Kettner has packed all the features guitarists have long been dreaming of into one amp: A genuine all-tube design and the boundless versatility of amp modeling. A bona fide tube amp. With tube-driven pre and power amps. And 4 channels that put the full arsenal of classic tones at your fingertips, from spine-tingling clean and crunch to singing lead and crushing ultra saturated sound. You don't need external effects, because reverb, delay and the most...

Duotone(R) delivers to-die-for tone, but takes the one-sound-wonder of vintage amps a significant step further. When we set out to design this modern classic, we collaborated with an amp-tuning specialist to embrace the pros' most frequently asked for modifications. The top four demands are more tone, more attack, a tube-driven effects loop and a clean channel that merits its name!So we went on to build the first off-the-rack amp to offer all of these special tweaks as standard features: You get...

Watts: 50. Power: 10 "D" batteries (not included). Width: 8 1/2". Depth: 8 1/2". Height: 3 1/4". Warranty: 1 year.

Slim Series 4-Channel Amplifier. RMS Power Output:. Frequency Response: 5 Hz - 100 kHz. Variable bass boost (0-10 dB at 40 Hz). Harmonic Distortion:: 0.005%. Built in Protection Circuit. Built in LPF and HPF: 80 Hz. MOSFET outputs and power supply. Speaker-level inputs with high-level sensing turn-on. Preamp inputs and outputs. Dimensions: 8-7/8" L x 7-3/4" W x 1-3/4" H. 1-year SonicElectronix.com warranty.

50 watt multimedia stereo amplifier with an all integrated circuit design. Auxiliary input stereo jack with separate volume and tone controls for a CD player, tape player or LCD computer projector. Line out jack for a tape recorder allows you to record your presentation as it is happening. Professional, low impedance, cardioid pattern, dynamic microphone with 15 ft. cable and flexible gooseneck, shockmount holder. 3 mic inputs can be used at the same time. 2 speaker jacks for a total of 4 speakers...

Whether you're looking for a small, high-quality combo for personal practice and rehearsal, or a highly portable alternative to your main rig, the BA112 packs a lot of Ampeg into its compact frame. The most lightweight and portable of the Bassamp Series, the rugged BA112 features a 50-Watt output section and a single 12 Ampeg speaker. Tone is the name of the game, and no matter what you're looking for, the Style Control puts absolute tone at your fingertips. With five presets to choose from, and...

Accepts line level or speaker level inputs. Powers up to 4, 4 Ohm speakers. Separate waterproof Volume control (10' lead). Use to add additional loudspeakers to a current audio system. Use to provide amplification for a separate audio zone. Use as a stand-alone system amplifier for any audio source Specifications:. Speaker Impedance: 2-8 ohm. Output Power 2ohm load: 25W RMS/Channel. Output Power 4ohm load: 15W RMS/Channel. Frequency Response: 20Hz-20kHz. Operating Voltage: 13.8V DC ...

* Multiple Channel Digital Amplifier: 8 Channel x 50 Watt. * Independent Level Controls for Each Channel. * Multiple Turn-on Modes. * Bridgeable Adjoining Channels. * Pass Through Outputs.

Rated at 50W RMS x 2 at 4 ohms, 75W RMS x 2 at 2 ohms and 150W RMS x 1 at 4 ohms (bridged); dynamic power: 300W at 4 ohms and 350W at 4 ohms (bridged). Bridgeable operation; can be configured for stereo/bridged simultaneous operation. 20 Hz - 20 kHz frequency response for accurate sound reproduction. PWM MOSFET power supply and extruded aluminum heat sink provide strong power with enhanced heat dispersion. Features auto-reset thermal overload protection, speaker short-circuit protection and reverse...

Product Description for the Traynor TB50 Combo Bass Amplifier The most compact professional solid-state bass combo in the line, the Traynor TB50 uses an innovative tilt-back cabinet design to ensure you can hear yourself on a quiet stage or rehearsal hall.Ideal for practice or for small gigs, the 50-watt single 10-inch loaded combo has an auxiliary RCA line input for CD / MP3 player and a headphone jack for private practice. An integrated all-metal bar handle and plywood cabinet construction ensures...

PWM MOSFET power supply. 2 Ohm stable stereo operation. Class AB output design. Stereo/bridged simultaneous operation. Bridgeable operation. Extruded aluminum heatsink. Barrier strip connection terminals. Side mounted controls. Auto-reset thermal overload protection. Speaker short circuit protection. Reverse polarity protection. Bi-color LED status indicator. Power Output: 50 Watts RMS x 2 channels at 4 ohms and < 1% THD+N. Signal to noise ratio: 75dBA (reference: 1 watt into 4 ohms...

Audiopipe AP1004 1000 Watt 4 Channel Amplifier. Built-in Variable High Pass & Low Pass Crossover. RCA Line Input/Output Jacks. Electronic Protection Circuitry to Protect The Amplifier from Short Circuit, DC Offset & Thermal Overload. Remote Sub-Woofer Volume Control. 55 mm(H) x 176mm(V) x 333mm(L). 2.2 inches(H) x 6.9 inches(W) x 13.1 inches(L). Frequency Response: 20Hz ? 20kHz. Signal to Noise Ratio: 95dB. Channel Separation: >65dB. Total Harmonic Distortion: <0.05%. Speaker Impedance...

Fixed low pass crossover: 120 hz. Variable input gain control. Power & protection LED indicators. Line & speaker level inputs. Chrome-Plated rca connectors & screw terminals. Freq resp: 12 hz–22 khz (±3 DB). 200W max. 50W X 2 @ 4_. Signal-To-Noise ratio: 90 DB. Thd @ rms output: 0.01%. Damping factor: 125+. Dim: 5"L X 9"W X 1.75"H.

The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch.

Two Channel Bridgeable Amplification. Tri-way Configuration:1/ 2 Channels. 2 x 50 Watts Total Output @ 4 Ohms. 1000 Watts Total System Output @ 4 Ohms. Variable Gain Control. MOSFET Pulse Width Modulated Power Supply. 2 Ohm Stereo Stable. Built-In Variable Subwoofer Crossover. High Level Low Impedance MOLEX Input Connector. RCA Low Level Inputs. Speaker Output Terminal Strip. Signal/Noise Ratio: 90dB. THD Less Than 0.04%. Frequency Response: 15-30kHz. Overload Protection. Thermal Protection...

50W x 4 Car Amplifier 150 watts RMS x 2 bridged,variable low- and high-pass filters,selectable bass boost