|
1-5/8" Carbide Tipped Forstner Bit
With Carbide Tips, these bits easily cut through Corian, Avonite and other solid surface materials, and they stay sharp longer in hard materials like maple due to their super sharp carbide. Not recommended for soft materials like pine or poplar, however - use standard Forstner bits. Made in Italy. 
|
$49.95
McFeely's
|
Top stores
McFeely's
$49.95
|
|
Vermont American 23111 5/8-by-1/2-Inch Carbide Tipped Hinge Mortise Router Bit, 2-Flute 1/4-Inch Shank
Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut For mortise making when work is started at edge Good chip clearance makes bit ideal for gummy wood, Weight: 0.1 lbs., Manufacturer: Vermont American
|
$11.19
|
Top stores
Amazon.com
$11.19
|
|
Freud Tools 12-138 5/8 "Carbide Tipped Double Flute Straight Bit Shank
Description Freud 12-138 Carbide Tipped Double Flute Straight Bit Specification: Item No.: 12-138 (D) Overall Diameter: 5/8 (h) Carbide Height: 1-1/4" (A) Shank Diameter: 1/2" (H) Overall Length: 2-1/2" Application: General stock removal with a smooth finish. Freud straight bit cuts smoother than other bits because of the precise shear and hook angles - End of bit relief allows for fast plunging. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers...
|
$21.47
circlesaw.com
|
Top stores
circlesaw.com
$21.47
|
|
Freud Tools 16-102 5/8 "Carbide Tipped Mortising Bit Shank
Freud 16-102 Carbide Tipped Mortising Bit Specification: Item No.: 16-102 (D) Overall Diameter: 5/8" (h) Carbide Height: 1/2" (A) Shank Diameter: 1/4" (H) Overall Length: 2" Application: Down shear works to eliminate splintering which is ideeal for hinges, mortises and dadoes. Freud's mortising bit is designed with deep center gullets for maximum material removal without chip loading. Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well...
|
$19.97
circlesaw.com
|
Top stores
circlesaw.com
$19.97
|
|
MAGBIT 781.12.1016 MAG 781 5/8-Inch by 12-Inch Carbide Tipped Bellhanger Drill Bit
Carbide tipped steel Cuts masonry, brick, concrete block Carbide tip cuts fast Fish eye hole provided near tip of flutes to aid in pulling wire compact bit fits tight spaces, Manufacturer: Magnus Industries Inc.
|
$9.97
|
Top stores
Amazon.com
$9.97
|
|
Freud Carbide-Tipped Forstner Bit, 1-5/8"
Flat carbide flutes with sharp knife-edged spurs do all the work of first scoring the surface and then removing waste with typical Forstner cleanness and precision; the rim of the bit is relieved of cutting function, serving to maintain accuracy and guide the bit in overlapping holes and the other functions special to the type.
|
$49.99
Highland Woodworking
|
Top stores
Highland Woodworking
$49.99
|
|
1-5/8'' Long Shank Carbide Forstner Bit
These professional quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT drill guide. All Forstner bits have a 3/8' diameter shank and require a 3/8 stop collar if used
|
$44.99
|
Top stores
Rockler.com
$44.99
|
|
Freud FC-004 5/8-Inch by 5/16-Inch Shank Carbide Forstner Drill Bit
Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Thick micrograin carbide tips Right hand rotation Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$21.91
|
Top stores
Amazon.com
$21.91
|
|
Freud FC-012 1-5/8-Inch by 3/8-Inch Shank Carbide Forstner Drill Bit
Drill flat bottomed holes without splintering Drill straight, angled and overlapping holes Thick micrograin carbide tips Right hand rotation Covered by Freud's limited lifetime warranty, Manufacturer: Freud
|
$43.78
|
Top stores
Amazon.com
$43.78
|
|
Bosch 85625M 1-5/8-Inch Diameter Carbide Tipped Ogee Stile & Rail 2 Piece Router Bit Set 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$100.00
|
Top stores
Amazon.com
$100.00
|
|
Bosch 85625MC 1-5/8-Inch Diameter Carbide Tipped Ogee Stile & Rail 2 Piece Router Bit Set 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$88.19
|
Top stores
Amazon.com
$88.19
|
|
Vermont American 23100 1/8-by-5/16-Inch Carbide Tipped Straight Router Bit, 1-Flute 1/4-Inch Shank
Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut For routing where high production feed rates are essential. Single flute, Weight: 0.1 lbs., Manufacturer: Vermont American
|
$7.61
|
Top stores
Amazon.com
$7.61
|
|
Bosch 85408M 5/8 Carbide Tipped Pilot Panel Bit
|
$30.95
heavydutystore.com
|
Top stores
heavydutystore.com
$30.95
|
|
Freud Tools 50-104 5/8 Carbide Tipped Top Bearing Flush Trim Bit Shank
Freud 50-104 Carbide Tipped Top Bearing Flush Trim Bit Specification: Item No.: 50-104 (D) Overall Diameter: 5/8" (B) Bearing Diameter: 5/8" (h) Carbide Height: 1" (A) Shank Diameter: 1/4" (H) Overall Length: 2-5/8" Application: Template work and lettering. The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywoods, hardwoods and softwoods. Use on hand-held and table-mounted...
|
$28.47
circlesaw.com
|
Top stores
circlesaw.com
$28.47
|
|
Bosch 85586M 1-5/8 Inch Carbide Tipped Ogee Bits with Fillet
Bosch 85586M is a 1-5/8 Inch Carbide Tipped Ogee Bits with Fillet. Micrograin control cut bits that allow for three distinct cuts with one bit. Graceful lines of the ogee cut can be attractively accented with one or two fillets by lowering the depth setting or using 3/8 Inch bearing.
|
$40.99
toolmarts.com
|
Top stores
toolmarts.com
$40.99
|
|
Champion TSC10-883 5/8 x 5/8 x 3 Brazed Carbide Tipped Square Shank Boring Tool Bit
Champion carbide tipped tools are engineered for high performance turning, boring, facing, grooving,forming, threading and chamfering. All tools feature Carboloy® carbide grades and are manufactured in the U.S.A. Series 883 is recommended for machining cast iron and nonferrous materials. Series 370 is for general purpose and heavy duty machining of steels, including stainless
|
$5.92
hermanscentral.com
|
Top stores
hermanscentral.com
$5.92
|
|
Triumph T125/8-6 - 5/8" x 6" Carbide Tipped T12 Masonry Bit
Size: 5/8". Length: 6". Point: 118°. Material: Carbide Tipped. Finish: Black and Oxide. America's Choice for Brick, Stone and Tile. Manufacturer Part No. 38440.
|
$11.44
galesburgelectric.com
|
Top stores
galesburgelectric.com
$11.44
|
|
KENROK CARBIDE TIPPED TOOL BITS 5/8 BL-10 QTY OF 5
Click to Enlarge Click to Enlarge Click to Enlarge KENROK CARBIDE TIPPED TOOL BITS 5/8 BL-10 Description: Carbide Tipped Tool Bits Shank Size: 5/8 Industry Standard Number: BL-10 Style: BL Material: Carbide Tipped Brand Import Style BL Industry Specification BL-10 Shank Size (Inch) 5/8 Material Carbide Tipped Material Grade C2 Rotation Left Hand Retail Price for one box of 5 Tool Bits is $33.50 You are bidding on one lot of 5 NEW Tool Bits! Get these here today from Industry Recycles...
|
$17.29
industryrecycles.com
|
Top stores
industryrecycles.com
$17.29
|
|
MS-305-6C 1-5/8 Inch Carbide Tipped Spur Bit
Micro Grain Carbide cutting surfaces. Each tool is guaranteed to work in our quick-release adapter and run smoothly in our Bore Master fixture, providing 100’s of cuts in the hardest of wood. High quality micro grain carbide cutting surfaces are welded to each cutter face and tip providing a service factor of at least 10 to 1 over regular carbon steel spur bits.
|
$59.99
toolorbit.com
|
Top stores
toolorbit.com
$59.99
|
|
Bosch 85681M 5/8-Inch Diameter 1-Inch Cut Carbide Tipped Top Bearing Straight Trim Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$21.40
|
Top stores
Amazon.com
$21.40
|
|
Trend T380X1/2TC 1-5/8-Inch Guided Tongue and Groove Carbide Tipped Router Bit, 1/2-Inch Shank
Microgranular tungsten carbide tipped for sharpness and life Anti-kickback for safety Heavy duty tube for protection and storage Bearing guided For use on hard and soft wood, fiberboard, plywood and particle board, Manufacturer: Trend
|
$50.26
|
Top stores
Amazon.com
$50.26
|
|
Vermont American 23102 1/4-by-5/8-Inch Carbide Tipped Straight Router Bit, 1-Flute 1/4-Inch Shank
Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut For routing where high production feed rates are essential. Single flute, Weight: 0.1 lbs., Manufacturer: Vermont American
|
$14.02
|
Top stores
Amazon.com
$14.02
|
|
Vermont American 23124 5/8-Inch Carbide Tipped Corebox Router Bit, 2-Flute 1/4-Inch Shank
Razor sharp cutting edge diamond honed for smooth cuts Triple tempered shank for maximum durability Industrial micrograin carbide for smooth cut Cuts rounded grooves for applications including doors and columns, Weight: 0.1 lbs., Manufacturer: Vermont American
|
$13.23
|
Top stores
Amazon.com
$13.23
|
|
Vermont American 23136 5/8-Inch Radius Carbide Tipped Roundover and Bead Router Bit, 2-Inch Ball Bearing 2-Flute 1/4-Inch Shank
Use to create decorative edging and drop-leaf table joints. Create beading profiles with corner round bits by exchanging the 1/2-Inch bearing with a 3/8-Inch bearing (included with bit). Carbide tipped. 1/4-Inch shank., Weight: 0.3 lbs., Manufacturer: Vermont American
|
$20.51
|
Top stores
Amazon.com
$20.51
|
|
|
Champion TSC5-883 5/16 x 5/16 x 1-1/2 Brazed Carbide Tipped Square Shank Boring Tool Bit
Champion carbide tipped tools are engineered for high performance turning, boring, facing, grooving,forming, threading and chamfering. All tools feature Carboloy® carbide grades and are manufactured in the U.S.A. Series 883 is recommended for machining cast iron and nonferrous materials. Series 370 is for general purpose and heavy duty machining of steels, including stainless
|
$3.52
hermanscentral.com
|
Top stores
hermanscentral.com
$3.52
|
|
Freud Tool FC-004 5/8" FORSTNER CARBIDE BIT
Freud's Carbide Forstner Bits bring a technical level of excellence not found in a standard high speed steel forstner bit. These bits will drill through a multitude of materials. Use to drill pocket holes, angled holes, overlapping holes and flat bottom holes. Best of all these bits will not burn like a standard forstner and will stay sharp many times longer. These bits can be resharpened by any reputable sharpening service who sharpens router bits.
|
$23.25
acetoolonline.com
|
Top stores
acetoolonline.com
$23.25
|
|
Templaco MS-400-6C 5/8 Inch Carbide Tipped Spur Bit
Our newest design with two Carbide Chip Lifter teeth and two Carbide Spur teeth. This new open head design passes wood cuttings through the cutter head better than our old style cutter. Each tool is guaranteed to work in our quick-release adapter and run smoothly in our Bore Master fixture, providing 100’s of cuts. High quality micro grain carbide cutting surfaces are welded to each cutter face and tip providing a service factor of at least 10 to 1 over regular carbon steel spur bits.
|
$59.99
toolmarts.com
|
Top stores
toolmarts.com
$59.99
|
|
Bosch 85230M 5/8-Inch Diameter 5/8-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$18.49
|
Top stores
Amazon.com
$18.49
|
|
|
Bosch 85230MC 5/8-Inch Diameter 5/8-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$13.23
|
Top stores
Amazon.com
$13.23
|
|
Bosch 85447M 5/8-Inch Diameter 7/16-Inch Cut Carbide Tipped Core Box Cutter Router Bit 1/4-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$20.19
|
Top stores
Amazon.com
$20.19
|
|
|
Bosch 85454M 5/8-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$16.24
|
Top stores
Amazon.com
$16.24
|
|
|
Bosch 85455M 5/8-Inch Diameter 1-1/4-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$27.93
|
Top stores
Amazon.com
$27.93
|
|
Bosch 85622M Beading Rail Assembly, 3/4 and 7/8 THK Wood, 1-5/8-Inch Diameter, 1/2-Inch Shank, 57/64-Inch Cut Carbide Tipped Router Bit
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$68.11
|
Top stores
Amazon.com
$68.11
|
|
Bosch 85627M 1-5/8-Inch Diameter 51/64-Inch Cut Carbide Tipped Ogee Stile & Rail Router Bit 1/2-Inch Shank
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$59.13
|
Top stores
Amazon.com
$59.13
|
|
Bosch 85646M 5/8-Inch Diameter 1-Inch Cut Carbide Tipped Face Frame Flush Trim V-Groove Router Bit 1/4-Inch Shank With Bearing
Recommended for use with a routing table All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router, Weight: 0.0 lbs., Manufacturer: Bosch
|
$22.68
|
Top stores
Amazon.com
$22.68
|
