|
5/64"" X 3/8"" Countersink W/brad Pt. Bit
Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives the hex shank of the countersink, instead of the drill... 
|
$9.75
McFeely's
|
Top stores
McFeely's
$9.75
|
|
|
5/64" X 3/8" Countersink w/ Pilot Bit
|
$8.99
eagleamerica.com
|
Top stores
eagleamerica.com
$8.99
|
|
3/8 Id X 7/8 Od X 5/64 Fl W Pln
United States Stove Company - USSC - Replacement Parts 3/8 Id X 7/8 Od X 5/64 Fl W Pln Make sure you select the right parts according to your stove instructions. We have thousands of stove manuals available for download. If you still need assistance after downloading your Manual CALL 800-893-4950
|
$2.15
a1stoves.com
|
Top stores
a1stoves.com
$2.15
|
|
Bosch B14605 3/8" X 5/16" Sh. Brad Pt. Drill Bit
* Brad point drill bits are designed to drill smooth, clean cuts in wood. The brad point tip provides easy positioning and accurate starts. Extra-wide flutes yield fast chip removal. * Brad Point Bits. * Item # B14605. * Diameter 3/8 Inch. * Shank Diameter 5/16 Inch. * Overall Length 5-3/16 Inch. * Flute Length 3-1/4 Inch.
|
$4.37
|
Top stores
PlumberSurplus.com
$4.37
|
|
|
Bosch B14609 5/8" X 3/8" Sh. Brad Pt. Drill Bit
Bosch B14609 5/8" X 3/8" Sh. Brad Pt. Drill BitBosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch B14609 5/8" X 3/8" Sh. Brad Pt. Drill Bit Features:• Brad point drill bits are designed to drill...
|
$8.07
|
Top stores
PlumberSurplus.com
$8.07
|
|
4 (5/64") x 3/8" Straight Countersink Bit
Drilling accurate hinge-screw pilot holes is not an easy task. More often than not the holes are off center and the screws go in crooked. These Snappy self-centering bits eliminate this problem. They feature a conical nosepiece that guides the drill to make a perfectly centered piliot hole. If the nosepiece becomes clogged with wood shavings simply loosen the bit casing by hand and the clogged shavings will come out.
|
$11.90
infinitytools.com
|
Top stores
infinitytools.com
$11.90
|
|
Snappy 9/64"" X 3/8"" Countersink W/standard Pt. Bit
Tired of countersinks that slip on the drill bit after one or two holes? After tightening the set screw half a dozen times, the drill bit is usually so scarred up that there is no hope of any further adjustment. Make it Snappy countersinks are designed so that the countersink locks onto the hex shank, and the drill bit slides through the center. A set screw allows adjustment of the drill bit for different screw lengths. Because the drill drives the hex shank of the countersink, instead of the drill...
|
$9.75
McFeely's
|
Top stores
McFeely's
$9.75
|
